Hampton Bay 172-503, 171-348, 170-721, 176-925, 171-889 User Manual

ELEMENTALS

by Hampton Bay®

TM

Farmington
52" Ceiling Fan
Owner’s Manual

Farmington
Ventilador de Techo de 1.32 m
Manual del Propietario

Farmington by Hampton Bay

15-Year Motor Warranty

The retailer warrants the fan motor to be free from defects in workmanship and material present
at time of shipment from the factory for a period of fifteen years after the date of purchase by the
original purchaser. The retailer also warrants that all other fan parts, excluding any glass or
plexiglass blades, to be free from defects in workmanship and material at the time of shipment
from the factory for a period of one year after the date of purchase by the original purchaser. We
agree to correct such defects without charge or at our option replace with a comparable or
superior model if the product is returned to the retailer. To obtain warranty service, you must
present a copy of the receipt as proof of purchase. All costs of removing and reinstalling the
product are your responsibility. Damage to any part such as by accident or misuse or improper
installation or by affixing any accessories, is not covered by this warranty. Because of varying
climatic conditions in the United States this warranty does not cover any changes in brass finish,
including rusting, pitting, corroding, tarnishing or peeling. Brass finishes of this type give their
longest useful life when protected from varying weather conditions. A certain amount of wobble is
normal and should not be considered a defect. Servicing performed by unauthorized persons
shall render the warranty invalid. There is no other express warranty. The retailer hereby
disclaims any and all warranties, including but not limited to. Those of merchantability and
fitness for a particular purpose to the extent permitted by law. The duration of any implied
warranty which cannot be disclaimed is limited to the time period as specified in the express
warranty. Some states do not allow limitation on how long an implied warranty lasts, so the
above limitation may not apply to you. The retailer shall not be liable for incidental,
consequential, or special damages arising out of or in connection with product use or
performance except as may otherwise be accorded by law. Some states do not allow the
exclusion of incidental or consequential damages, so the above exclusion or limitation may not
apply to you. This warranty gives specific legal rights, and you may also have other rights which
vary from state to state. This warranty supersedes all prior warranties.

Date Purchased

Store Purchased

Model No.

Serial No.

Vendor No.

792145352952 (170-721)
792145352969 (172-503)
792145352976 (171-348)
792145352983 (171-889)
792145352990 (176-925)

UPC.

170-721
172-503
171-348
171-889
176-925

11289

Safety Rules.......................................................................................................................................

Unpacking Your Fan ..........................................................................................................................

Installing Your Fan ............................................................................................................................

Operating Your Fan............................................................................................................................

Care of Your Fan .............................................................................................................................

Troubleshooting ..............................................................................................................................

Specifications .................................................................................................................................

10.

11.

12.

Table of Contents

1.

2.

3.

9.

1. To reduce the risk of electric shock, insure electricity has been turned off
at the circuit breaker or fuse box before beginning.

2. All wiring must be in accordance with the National Electrical Code and
local electrical codes. Electrical installation should be performed by a
qualified licensed electrician.

3. WARNING: To reduce the risk of electrical shock and fire, do not use
this fan with any solid-state fan speed control device.

4. WARNING: To reduce the risk of personal injury, use only the two steel
screws (and lock washers) provided with the outlet box for mounting to
the outlet box. Most outlet boxes commonly used for the support of
lighting fixtures are not acceptable for fan support and may need to be
replaced, consult a qualified electrician if in doubt.

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL INJURY,
MOUNT FAN TO OUTLET BOX MARKED ACCEPTABLE FOR FAN SUPPORT.

5. The outlet box and support structure must be securely mounted and

capable of reliably supporting a minimum of 50 pounds. Use only
UL Listed outlet boxes marked FOR FAN SUPPORT.

6. The fan must be mounted with a minimum of 7 feet clearance from

the trailing edge of the blades to the floor.

7. Do not operate the reverse switch while the fan blades are in motion.

The fan must be turned off and the blades stopped before reversing
the blades direction.

WARNING

1. Safety Rules

8. Avoid placing objects in the path of the blades.

9. To avoid personal injury or damage to the fan and other items, be
cautious when working around or cleaning the fan.

10. Do not use water or detergents when cleaning the fan or fan blades. A
dry dust cloth or lightly dampened cloth will be suitable for most
cleaning.

11. After making electrical connections, spliced conductors should be turned
upward and pushed carefully up into the outlet box. The wires should
be spread apart with the grounded conductor and the equipment­grounding conductor on one side of the outlet box.

12. Electrical diagrams are for reference only. Light kits that are not packed
with the fan must be UL Listed and marked suitable for use with the
model fan you are installing. Switches must be UL General Use
Switches. Refer to the Instructions packaged with the light kits and
switches for proper assembly.

13. WARNING: To reduce the risk of fire or electric shock, do not use this
with any solid-state speed control device.

TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE

BLADE ARMS (ALSO REFERRED TO AS BRACKETS) DURING

ASSEMBLY OR AFTER INSTALLATION. DO NOT INSERT OBJECTS IN

READ AND SAVE ALL INSTRUCTIONS!

WARNING

THE PATH OF THE BLADES.

NOTE