Hammond Power Solutions HPS TITAN General Product Line Information

HPS TITAN
SECTION 9
SERIES TRANSFORMERS
ENVIRONMENTS AND HAZARDOUS LOCATIONS
SINGLE PHASE STANDARD SPECIFICATIONS
.05 kVA to 1 kVA 1.5 to 37.5 kVA
UL 1604, Class I, Division 2 File: E258346 File: E258346
ABS Type Approval (RQS) Certicate No.: 04-MO523208-X Certicate No.: 04-MO523208-X
Frequency 60 Hz (50/60 Hz on units with 380V primary) 60 Hz (50/60 Hz on units with 380V primary)
SECTION 9
Insulation System 130°C (80°C rise) standard on all units 180°C (115°C rise) standard on all units.
Optional 130°C (80°C rise) available.
Electrostatic Shield Optional on units up to .500 kVA. Standard on all units.
Standard on .750 kVA and 1 kVA units.
Encapsulation All units are encapsulated with electrical All units are encapsulated with electrical
grade silica sand and resin compounds. grade silica sand and resin compounds.
Enclosure Type Heavy Duty Encapsulated NEMA Type 3R Heavy Duty Encapsulated NEMA Type 3R
Optional NEMA 4, 4X (stainless steel) and 12 Optional NEMA 4, 4X (stainless steel) and 12
Enclosure Finish ANSI 61 Grey, UL50 ANSI 61 Grey, UL50
Termination Front accessible separate high and Front accessible separate high and
low voltage lead wires or copper tabs. low voltage lead wires or copper tabs.
Conduit Knock-Outs Standard side and rear knock-outs on all units. Standard side and rear knock-outs on all units.
Impedance Typically 1 to 5%. Typically 1 to 5%.
Mounting Standard Wall Mounting. Standard Wall Mounting.
Lifting ears provided on all units 5 kVA and up.
Sound Level Meets NEMA ST-20 standards. Meets NEMA ST-20 standards.
(optional low noise units available on request) (optional low noise units available on request)
Other voltages not listed in this section are available upon request. Please contact customer service for details, price and availability.
All HPS TITAN single phase transformers are UL Listed for “Class 1, Division 2, Groups A, B, C and D Hazardous Locations” and are ABS Type Approved for “Marine Duty Service and Offshore Applications - Electrical Distribution
and Propulsion”. And with a North American Temperature Classication of T3C, the HPS TITAN series will remain
cool under load.
224
© Hammond Power Solutions Inc.
Fo r a c c e s s o r i e s s e e p a g e s 254-257.Fo r t e r m i n a t i o n d e t a i l s s e e p a g e 269.
Data subject to change without notice.
Loading...