Hammond Power Solutions HPS IMPERATOR Accessories Catalog

Download

Page 1

SECTION 1

HPS IMPERATOR

SECTION 9

Fuse Kits

Standard Secondary Fuse Kits

All HPS Imperator control transformers up to and including 1500 VA are supplied with standard secondary fuse kits which include: 13/32” x 1 1/2” midget/type CC fuse clips, fuse clip mounting screws, primary and secondary voltage links and the PHAK1 instruction sheet (note: secondary fuse clips and

fuse clip mounting screws are not supplied on the PH750PG, PH1000PG, PH750MLI, and PH1000MLI).

Optional Primary Fuse Kits

All HPS Imperator series machine tool industrial control transformers are available with the following optional primary fuse kits:

SECTION 1

Kit Part Number

PFK1 PFK2 PFK3

PFK4 PFK5 PFK5

PFK6 PFK6

PFK7

Note: Maximum allowable current rating on all primary and secondary fuse kits is 30 amps.

Applicable Transformer

Part Number Sufx’s

AJ, AR, MQMJ, QR, SP, PG, PP AJ, AR, MQMJ, QR, SP, PG, PP AJ, AR, MQMJ, QR, SP, PG, PP MBMH, MEMX, MGJ, MLI MEMX, MGJ, MLI, MBMH MEMX, MGJ, MLI MBMH MBMH, MEMX, MGJ, MLI MBMH, MEMX, MGJ, MLI

Applicable VA Sizes

50, 75, 100 150, 250 350 to 1500 50 75 100 100 150, 250 350 to 1500

Parts Included in Kit

4 fuse clips, 4 mtg. screws, PHAK1 instruction sheet 4 fuse clips, 4 mtg. screws, PHAK1 instruction sheet 4 fuse clips, 4 mtg. screws, PHAK1 instruction sheet

4 fuse clips, 4 mtg. screws, 1 jumper, 1 nger guard, PHAK1 instruction sheet 4 fuse clips, 4 mtg. screws, 1 jumper, 1 nger guard, PHAK1 instruction sheet 4 fuse clips, 4 mtg. screws, 1 jumper, 1 nger guard, PHAK1 instruction sheet

4 fuse clips, 4 mtg. screws, 1 jumper wire, PHAK1 instruction sheet 4 fuse clips, 4 mtg. screws, 1 jumper wire, PHAK1 instruction sheet 4 fuse clips, 4 mtg. screws, 1 jumper wire, PHAK1 instruction sheet

Sample Assembly Drawing for

Voltage Link Installation

(for 150VA to 1500VA)

Note: HPS Imperator primary and secondary fuse kits are not suitable for branch circuit applications!

Sample Assembly Drawing

for Secondary Fuse Clip

Installation

(for 150VA to 1500VA)

Sample Assembly Drawing

for Primary Fuse Clip

Installation

(for 150VA to 1500VA)

Data subject to change without notice.

Page 2

SECTION 1 HPS IMPERATOR

Finger Guards

The HPS Imperator series of machine tool industrial molded control transformers are available with the

following optional nger guard kits:

Optional Unfused Finger Guard Kits

Kit Part Number

FG1 FG2 FG2

N/A

SECTION 1

Note: Each nger guard kit supplies either the primary or secondary side.

Optional Fused Finger Guard Kits

Kit Part Number

FGF1 FGF2 FGF2 FGF2 FG3 FG3 FG3

FG4 FG4 FG4 FG5 FG5

N/A

Note: Each nger guard kit supplies either the primary or secondary side.

Applicable Transformer

Part Number Sufx’s

AJ, AR, MQMJ, MEMX, QR, SP, PG, PP MBMH, MGJ, MLI All

(excluding PH100MBMH)

refer to FG3, FG4 or FG5 below

N/A

Applicable Transformer

Part Number Sufx’s

AJ, AR, MQMJ, MEMX, QR, SP, PG, PP MBMH, MGJ, MLI All All

(excluding PH100MBMH)

MBMH All AJ, AR, MQMJ, MEMX, QR, SP, PG, PP MBMH, MGJ, MLI All AJ, AR, MQMJ, QR, SP, PP MBMH, MEMX, MGJ, MLI, PG All N/A

Applicable VA Sizes

50 50 75, 100

150 to 1500

2000 to 5000

Applicable VA Sizes

50 50 75 100 100 150 250 250 350, 500 750 750 1000, 1500 2000 to 5000

Parts Included in Kit

1 nger guard (unfused), PHAK1 instruction sheet 1 nger guard (unfused), PHAK1 instruction sheet 1 nger guard (unfused), PHAK1 instruction sheet

Parts Included in Kit

1 nger guard (fused), PHAK1 instruction sheet 1 nger guard (fused), PHAK1 instruction sheet 1 nger guard (fused), PHAK1 instruction sheet 1 nger guard (fused), PHAK1 instruction sheet 1 nger guard, PHAK1 instruction sheet 1 nger guard, PHAK1 instruction sheet 1 nger guard, PHAK1 instruction sheet 1 nger guard, PHAK1 instruction sheet 1 nger guard, PHAK1 instruction sheet 1 nger guard, PHAK1 instruction sheet 1 nger guard, PHAK1 instruction sheet 1 nger guard, PHAK1 instruction sheet

Sample Assembly Drawing

for Finger Guard Installation

(for 50, 75 and 100VA)

Sample Assembly Drawing

for Finger Guard Installation

(for 150VA to 1500VA)

Data subject to change without notice.

Page 3

SECTION 1

SECTION 9

Accessory Installation Guide

Sample Accessory Drawings

HPS IMPERATOR

SECTION 1

Voltage Link

Fuse Clips

(for 50, 75 and 100VA)

Sample Accessory Assembly Drawings

Sample Assembly Drawings for

Voltage Link Installation

For units from 50VA to 100VA, the voltage links supplied can be

installed between any two primary or secondary terminal bays. Please refer to PHWD1 or PHWD2 instruction sheet included with your transformer for connection for details.

Style A

(left)

Style B

(center)

Style A

(right)

Fuse Clips

(for 150VA to 1500VA)

Sample Assembly Drawing for

Finger Guard Installation

Fused & Unfused

Finger Guard

(for 50, 75 and 100VA)

Finger Guard

(for 150VA to 1500VA)

Sample Assembly Drawing for

Finger Guard Installation

(for 150VA to 1500VA)

For units from 150VA to 250VA, the voltage links supplied must

be installed between the primary or secondary terminal bays as indicated above Please refer to PHWD1 or PHWD2 instruction sheet included with you transformer for connection details.

Style A

(left)

For units from 350VA to 1500VA, the voltage links supplied must

be installed between the primary or secondary terminal bays as indicated above Please refer to PHWD1 or PHWD2 instruction sheet included with you transformer for connection details.

Style B

(center)

Style A

(right)

Sample Assembly Drawing for

Fuse Clip Installation

(for 50, 75 & 100VA)

Note: HPS Imperator primary and secondary fuse kits are not suitable for branch circuit applications!

Sample Assembly Drawing for

Primary Fuse Clip Installation

(for 150VA to 1500VA)

Data subject to change without notice.