Hammond Manufacturing Splitter Boxes Catalog Page

Splitter Boxes

NEMA 3R, 12, 4

Commercial Enclosures

www.hammondmfg.com

Application

• The splitter boxes are designed for distribution of up to 600 V (max) service using either 3 or 4 wires.

Standards

• CSA Type 3R, 12, 4

• Complies with

• IEC 60529, IP66

Splitter Boxes

Construction

• Formed 14 and 16 gauge steel.

• Factory installed splitter blocks.

• Smooth, continuously welded seams ground smooth.

• Door stiffeners are provided where required for increased strength and rigidity - designed to also permit additional mounting options.

• Formed lip on enclosure to exclude ﬂ owing liquids and contaminants.

• Door latches feature the added safety of quarter turn slot requiring use of tool for opening.

• Doors may be easily removed for modiﬁ cations and are interchangeable.

• Seamless poured-in place gasket.

• Collar studs provided for mounting inner panel.

• Includes hardware kit with panel mounting nuts and sealing washers for wall mounting holes.

• Hinges are constructed from 304 stainless steel.

• Hinge pins are stainless steel.

• Inner panel is included.

Finish

• Cover and enclosure are ﬁ nished in recoatable smooth ANSI 61 gray powder coating.

• Inner panel is ﬁ nished in white powder coating.

Accessories

• Quarter turn inserts and keys

...see page 31

• Mounting foot kit...see page 31

• Rear hole plugs...see page 32

• Replacement hinge pins...see page 29

• Replacement quarter turn assemblies...see page 31

• Touch up paint...see page 455

• Padlock adaptor...see page 434

307

Technical references and CAD downloads available at www.hammondmfg.com All dimensions in inches unless speciﬁ ed otherwise

Quality Products. Service Excellence.

DD MIDDLE

HINGE IF

> = 30

3.000

www.hammondmfg.com

Splitter Boxes

NEMA 3R, 12, 4

ADD 1/4 TURN IF A > = 30

Commercial Enclosures

3.000

Front View

1/4 TURN LATCH

Splitter Boxes

Section A-A

Part Number

3 Wire 4 Wire A B C D E F

CN4SB73 CN4SB74 CN4SB103 CN4SB104 CN4SB203 CN4SB204 CN4SB403 CN4SB404 CN4SB603 CN4SB604

* 14 gauge steel

Technical references and CAD downloads available at www.hammondmfg.com All dimensions in inches unless speciﬁ ed otherwise

Door/Body

Gauge

16 CGK125 70/70 12 10 5 10.17 8.17 N/A 1 2 16 CGK125 125/120 15 10 5 13.17 8.17 N/A 1 2 16 CGK225 225/225 18 12 5 16.17 10.17 N/A 1 2 16 CGK400 400/340 24 17 6 22.17 15.17 N/A 1 2 14 CGK600 600/574 30 24 7 28.17 22.17 12.00 2 3

Optional

Grounding Kit

CU/AL

Amps

Dimensions

INNER PANEL

# of

Latches

# of

Hinges

Quality Products. Service Excellence.

308