Hammond Manufacturing RP Series Catalog Page
www.hammondmfg.com
Watertight Polycarbonate (RP Series)
Key Features:
• Ideally suited for mounting printed circuit boards or
DIN rail mounted components.
• Material - Polycarbonate (material carries a UL fl am-
mability rating of UL94 HB).
• Color is an off white with a light texture.
• Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil,
dust and water.
• Rubber gasket is included and must be fi eld installed.
• Lid includes smooth recessed area for membrane,
label or silkscreen (see chart below for recess size).
• Designed to meet IP 65.
• Lid is secured with self captivating - M3.5 stainless
steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly
& disassembly). All stainless steel hardware to avoid
corrosion caused by dissimilar metals.
• Lid screws are self captivating (lid holes are threaded
with the fi rst installation of lid screws).
• Internal features are maximized for mounting options:
○ Internal DIN rail mounting tabs - molded in.
○ Options vary with size.
Part No. Units Length Width
RP1020
RP1060
RP1080
RP1090
RP1130
RP1200
RP1210
RP1170
RP1240
RP1280
RP1450
RP1460
inch 2.56 2.36 1.57 1.54 x 2.05
mm 65 60 40 39 x 52
inch 3.35 3.15 2.17 2.32 x 2.83
mm 85 80 55 59 x 72
inch 4.13 2.95 1.57 2.56 x 3.07
mm 105 75 40 65 x 78
inch 4.13 2.95 2.17 2.56 x 3.07
mm 105 75 55 65 x 78
inch 4.92 3.35 2.17 3.03 x 3.90
mm 125 85 55 77 x 99
inch 5.71 4.13 1.77 4.57 x 3.78
mm 145 105 45 116 x 96
inch 5.71 4.13 2.56 4.57 x 3.78
mm 145 105 65 116 x 96
inch 6.5 3.35 2.17 2.76 x 5.47
mm 165 85 55 70 x 139
inch 6.5 4.92 2.95 5.43 x 4.57
mm 165 125 75 138 x 116
inch 7.32 5.75 2.95 5.08 x 5.91
mm 186 146 75 129 x 150
inch 8.66 6.5 2.36 7.28 x 5.91
mm 220 165 60 185 x 150
inch 8.66 6.5 3.35 7.28 x 5.91
mm 220 165 85 185 x 150
Height
(Includes
Lid)
Lid
Recess Size
Technical references and CAD downloads available at www.hammondmfg.com
9
Loading...