Hammond Manufacturing PHW Series Catalog Page

Polyester Modular Enclosures - NEMA 4X
PHW Series - Heavy Duty Wallmount Enclosures
Corrosion Resistant
These enclosures are specially
Wallmount Enclosures
designed to accomodate electrical, electronic, instrumentation and mechanical controls indoors and outdoors.
For use where corrosion resistant watertight enclosures are needed to provide protection against windblown dust and rain, splashing and hose directed water.
Standards
UL 508 1, 3, 3R, 4, 4X, 12
CSA 1, 3, 3R, 4, 4X, 12
Complies with
NEMA 1, 3, 3R, 4, 4X, 12
• IEC 60529, IP 66
Construction
Compression molded, fiberglass
• reinforced polyester. Memory retaining, continuous door
• gasket standard. Molded in panel mounting inserts
• (except where noted). Integral mounting feet.
• Stainless steel hardware.
• Padlocking provision.
• Stainless steel butterfly type "twist
• latch" door fasteners. Door is supported with a continuous
• hinge. For corrosion resistance
• information, please refer to table in the Technical Information section.
Finish
Fiberglass reinforced material is
• finished in light gray.
Accessories
Inner Panels
140
Technical references and DXF downloads available at www.hammfg.com All dimensions in inches unless specified otherwise
Quality Enclosures. Service Excellence.
© Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 USA: 716.630.7030 Data Subject to change without notice
Polyester Modular Enclosures - NEMA 4X
PHW Series - Heavy Duty Wallmount Enclosures
Corrosion Resistant
Part No.
PHW20166
PHW20168
PHW201610
PHW201612
PHW241210
PHW24208
PHW242410
PHW30208
PHW302010
PHW30247
PHW302410
PHW302412
PHW363010
PHW363012
PHW483616
PHW603616
Inches are for reference only. Use metric for precise measurements.
Overall Dimensions
H W D A B C E F J K L M N
inch 22.75 16.87 7.77 19.70 16.04 7.24 21.50 10.12 6.26 15.25 11.25 16.75 12.19
mm 578 429 197 500 407 184 546 257 159 387 286 425 310
inch 22.75 16.87 9.77 19.70 16.04 9.24 21.50 10.12 8.26 15.25 11.25 16.75 12.19
mm 578 429 248 500 407 235 546 257 210 387 286 425 310
inch 22.75 16.87 11.77 19.70 16.04 11.24 21.50 10.12 10.26 15.25 11.25 16.75 12.19
mm 578 429 299 500 407 286 546 257 261 387 286 425 310
inch 22.75 16.87 13.77 19.70 16.04 13.24 21.50 10.12 12.26 15.25 11.25 16.75 12.19
mm 578 429 350 500 407 336 546 257 312 387 286 425 310
inch 26.95 13.72 11.99 24.00 12.87 11.33 25.75 6.25 10.33 19.25 7.25 21.00 8.37
mm 685 348 304 610 327 288 654 159 262 489 184 533 213
inch 27.00 21.24 9.90 24.05 20.39 9.25 25.75 14.00 8.25 19.25 15.25 21.25 16.00
mm 686 539 252 611 518 235 654 356 209 489 387 540 406
inch 27.00 25.25 11.90 24.05 24.39 11.25 25.75 17.87 10.25 19.25 19.25 21.25 20.00
mm 686 641 302 611 619 286 654 454 260 489 489 540 508
inch 32.86 20.99 9.89 29.90 20.14 9.23 31.75 14.25 8.23 25.25 15.25 27.00 16.50
mm 835 533 251 760 511 234 806 362 209 641 387 686 419
inch 32.86 20.99 11.89 29.90 20.14 11.23 31.75 14.25 10.23 25.25 15.25 27.00 16.50
mm 835 533 302 760 511 285 806 362 260 641 387 686 419
inch 33.41 26.32 8.81 30.46 25.47 8.12 32.25 18.50 7.12 25.25 19.25 27.38 21.25
mm 849 668 224 774 647 206 819 470 181 641 489 695 540
inch 33.41 26.32 11.95 30.46 25.47 11.27 32.25 18.50 10.27 25.25 19.25 27.38 21.25
mm 849 668 304 774 647 286 819 470 261 641 489 695 540
inch 33.41 26.32 13.79 30.46 25.47 13.10 32.25 18.50 12.1 25.25 19.25 27.38 21.25
mm 849 668 350 774 647 333 819 470 307 641 489 695 540
inch 39.31 32.50 12.05 36.31 31.69 11.36 38.13 23.88 10.36 31.25 25.25 33.25 27.25
mm 999 826 306 922 805 289 968 606 263 794 641 845 692
inch 39.31 32.50 14.05 36.31 31.69 13.36 38.13 23.88 12.36 31.25 25.25 33.25 27.25
mm 999 826 357 922 805 339 968 606 314 794 641 845 692
inch 51.29 36.62 17.93 48.33 36.22 17.25 50.12 29.25 16.25 43.25 31.25 45.25 32.00
mm 1303 930 456 1228 920 438 1273 743 413 1099 794 1149 813
inch 63.50 36.50 18.12 60.13 36.13 17.44 62.25 28.50 16.44 53.06 31 55.75 32.00
mm 1613 927 460 1527 918 443 1581 724 418 1348 787 1416 813
Inside
Dimensions
Mtg.
Centers
Enclosure
Opening
Optional Panel Part No.
18P1713
18P1713
18P1713
18P1713
18P2109
18P2117
18P2121
19P2717
18P2717
18P2721
18P2721
18P2721
18P3327
18P3327
18P4533
18P5733
Ship
Wt. lbs
17
22
23
24
25
32
42
36
39
45
50
54
78
81
108
155
Wallmount Enclosures
Technical references and DXF downloads available at www.hammfg.com All dimensions in inches unless specified otherwise
Quality Enclosures. Service Excellence.
© Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 USA: 716.630.7030 Data Subject to change without notice
141
Loading...