Hammond Manufacturing PCJ Series Catalog Page

PJ/PJU Replacement Hardware Kits Inner Panels

Type 4X Polycarbonate Junction Box (Solid and Clear Cover) PCJ

Series

Metal Latch Cover

Application

Designed to insulate and protect controls and componets in both indoor
and outdoor conditions
Ideal for industrial pump controls, waste water, irrigation control along with
solar/wind and chemical plants

Standards

UL 508 Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with

NEMA Type 1, 2, 3, 4, 4X, 12 and 13
IEC 60529, IP66
Flamability V-O per UL 94
UV rating (f1) per UL746C - UV stabilized for outdoor use
Complient with RoHS directive

Construction

Injection moulded polycarbonate thermoplastic enclosure with matching
cover is easily punched, cut, or drilled
Enhanced UV inhibitors protect against outdoor weathering
Threaded brass inserts are provided for optional inner panel or terminal kit
mounting. Mounting hardware is included
Stainless steel 316 screw fasteners
Door fasteners include a provision for padlocking on Snap Latches
Enclosure available with clear Polycarbonate cover
Molded hinge with 316 stainless steel pin
Captive oil resistant gasket provides a positive seal
Available with Polycarbonate flange or foot mount brackets for multi­directional mounting
Operating temperatures between 130°C and - 35 °C (266°F to - 31 °F)
Impact index of 16 J (12 ft/lb)
For corrosion resistance information, please refer to table in the Technical
Information section

Finish

Polycarbonate material has a Light gray finish
Optional inner panels are available in white powder coated finished steel or
unfinished aluminum, or Fiberglass

Accessories

Quality Products. Service Excellence.

Swing Panel

Flanged

Solid Cover Clear Cover

Optional

Steel

Flange Flange

Overall

Dimensions

Panel

Dimensions

Mounting

Centers

Inner

Panel

Part No. Part No. A B C D E KL(inches) Part No.

PCJ664LF PCJ664CCLF 5.93 6.16 3.98 4.81 4.81 4.00

6.88 /

6.75

PCJR0505