Hammond Manufacturing HWM Series Catalog Page

Three-Piece Swing-Out Rack Cabinet

HWM Series

www.hammondmfg.com

Center section easily removes for installation.

Tinted acrylic and solid doors also available.

Data Communication Infrastructure

Emboss for

vertical/

horizontal outlet

strip mounting

Side Fan Grill Cutouts

Mounting points for easy

Vented front door included

Application

• The Hammond Wall Mount (HWM) cabinet was designed with the technical professional in mind. Easy to install design. The vented front door and side panels were speciﬁ cally designed for high capacity servers, switches and power management devices.

Features

• Available in three (3) depths and four (4) heights.

• Includes vented 65% perforated front door (optional door types available).

• Front door and center section keyed the same.

• EIA compliant adjustable depth mounting rails.

• Includes one (1) pair of tapped (10-

32) mounting rails.

• Recommended weight load tested for 275 lbs.

• Center section features:

• Heavy duty spring-hinge pin for easy installation and removal.

• Side panel that includes two (2) vents and fan grill.

Technical references and CAD downloads available at www.hammondmfg.com All dimensions in inches unless speciﬁ ed otherwise

• Rear section features:

• Top and side conduit knock-outs for cable entry.

• Generous cable management lances located on the rear section as well as on mounting rails.

• Mounting points for Outlet Strip (uses HWMPCLIP).

• Heavy duty keyhole for wall mounting.

• Large opening in rear for cable access.

Construction

• 14-gauge welded rear section; 16-gauge center section and doors.

• Grounding lugs located on top and bottom of the door, center and rear sections.

• Rugged sand-textured black powder paint (reduced ﬁ ngerprints and marks).

mounting of outlet strip.

Accessories

• Additional pair of rails with either 1032 taps or square holes.

• Tinted acrylic and solid doors.

• Clip for mounting outlet strip (Use with 1585 Series of power strips).

• Lock (front door only) keyed differently for increased security.

• Power Bars...see page 444

• Hardware...see page 432

• Shelves...see page 425

• Panels...see page 426

• Cable Managers...see page 426

Generous fan knockouts/ cutouts for cooling.

Top Fan Laser

Knockouts

405

Quality Products. Service Excellence.

www.hammondmfg.com

Three-Piece Swing-Out Rack Cabinet

HWM Series

Data Communication Infrastructure

32U

(62.75”)

24U

(48.75”)

Mounting Rack Units

(Overall Height)

Part # Inches Units Height Depth

HWM2412U11BK 11 21 12 27.75 16.7 HWM2420U11BK 11 35 20 41.75 16.7 HWM2424U11BK 11 42 24 48.75 16.7 HWM2432U11BK 11 56 32 62.75 16.7 HWM2412U20BK 20 21 12 27.75 25.7 HWM2420U20BK 20 35 20 41.75 25.7 HWM2424U20BK 20 42 24 48.75 25.7 HWM2432U20BK 20 56 32 62.75 25.7 HWM2412U26BK 26 21 12 27.75 31.7 HWM2420U26BK 26 35 20 41.75 31.7 HWM2424U26BK 26 42 24 48.75 31.7 HWM2432U26BK 26 56 32 62.75 31.7

Technical references and CAD downloads available at www.hammondmfg.com All dimensions in inches unless speciﬁ ed otherwise

20U

(41.75”)

Center Depth (Inches)

12U

(27.75”)

Panel Height

11”

(16.7”)

Overall Dim. (Inches)

20”

(25.7”)

Center Section Depth

26”

(31.7”)

(Overall Depth)

Optional Accessories:

DescriptionPar t #

HWMSD2412UBK 12U Solid Door HWMSD2420UBK 20U Solid Door HWMSD2424UBK 24U Solid Door HWMSD2432UBK 32U Solid Door HWMPD2412UBK 12U Tinted Acrylic Door HWMPD2420UBK 20U Tinted Acrylic Door HWMPD2424UBK 24U Tinted Acrylic Door HWMPD2432UBK 32U Tinted Acrylic Door HWMTR12U 12U Tapped 10-32 Rail (Pair) HWMTR20U 20U Tapped 10-32 Rail (Pair) HWMTR24U 24U Tapped 10-32 Rail (Pair) HWMTR32U 32U Tapped 10-32 Rail (Pair) HWMSR12U 12U Square Hole Rail (Pair) HWMSR20U 20U Square Hole Rail (Pair) HWMSR24U 24U Square Hole Rail (Pair) HWMSR32U 32U Square Hole Rail (Pair) HWMPCLIP Power Bar Clip HWMSLOCK Front door lock (Keyed differently) GRDKIT02 Ground Kit DNFK1AC120 Single (1) Fan kit with grills & cord DNFK2AC120 Dual (2) Fan kit with grills & cord

Quality Products. Service Excellence.

406