Hammond Manufacturing HME Series Catalog Page

HME Series

www.hammondmfg.com

Modular Enclosures

Application

• The HME product line provides users with a rugged housing for industrial control and operator interface in industrial environments.

• Modular design permits joining of units together for large scale and mixed use applications.

• Frame’s 25mm hole pattern provides extensive component and accessory mounting ﬂ exibility.

• A broad range of industry standard sizes are offered.

Standards

• UL 508 Type 12

• CSA Type 12

• Complies with

• NEMA Type 12

• IEC 60529 IP54

Conﬁ guration

• Frame

• Removable solid top panel

• Lifting eyebolts (4)

• Removable bottom panel w/gland plates

• Solid front door with door frame

• Removable rear cover panel

• Inner mounting panel

Construction

• Formed 14 gauge steel.

• Fully welded frame with 25mm hole pattern for superior mounting ﬂ exibility.

• Seamless foam in place gasket.

• Reinforced eyebolts are provided for easy enclosure lifting.

• Frames can be joined together with an optional joining kit.

• Doors can be easily interchanged, removed and/or reversed.

• Door opening 135°.

• Optional formed 14 gauge steel side panels are sold separately (in pairs).

• Bonding and grounding studs are provided for all doors and panels.

Finish

• Phosphatized and ﬁ nished in RAL 7035 light gray powder coating.

• Inner panel is unpainted galvanized 12 gauge steel.

Accessories

• 19” mounting rails

• Cooling - ACs

• Cooling - fans

• Door shelf

• Frame joining kit

• Grid mounting system

• Handles and inserts

• Interlock system

• Leveling feet

• Light kit and accessories

• Literature pocket

• Panel - Bridge

• Panel - Barrier

• Swing Panel

• Swing Frame

• Plinth

• Side panels

• Tamper resistant screws

• Top mount cable module

Technical references and CAD downloads available at www.hammondmfg.com All dimensions in inches unless speciﬁ ed otherwise

Quality Products. Service Excellence.