Hammond Manufacturing HFMD Series, HFMDT Series Catalog Page

HFMD/HFMDT Series

• General Electric: Type STDA

• ITE Siemens Max-Flex: ﬂ ange

HFMD - 1DR

Application

• The HFMD 1 door and HFMDT 2 door product lines provides users with a rugged housing for ﬂ ange mount disconnect and circuit breaker requirements.

• Modular design permits joining of units together for large scale and mixed use applications.

• Frame’s 25mm hole pattern provides extensive component and accessory mounting ﬂ exibility.

• A broad range of industry standard sizes are offered.

• HME/HMET Series enclosures can be used as slave units to HFMD/ HFMDT Disconnect Series.

• The ﬂ ange mount disconnect units accommodate today’s most popular disconnect hardware.

• ABB Controls: Disconnect Switches up to (and including) 200 amp, also operators for ABB circuit breakers up to 800 amp.

• Allen Bradley: 1494V variable depth ﬂ ange mounted disconnect up to and including 200 amp and operators for C-H Westinghouse circuit breakers up to 400 amp.

• C-H Westinghouse: C361 ﬂ ange mounted disconnect switches up to and including 200 amp and C371 circuit breakers up to 600 amp, also Flex Shaft handle mechanisms for circuit breakers.

• Square D: class 9422 variable

Standards

• UL 508 Type 12

• CSA Type 12

• Complies with

• Appropriate components are

Standard Conﬁ guration

• Frame

• Removable solid top panel

• Lifting eyebolts (4)

• Removable bottom panel w/gland

• Solid front door(s) with door

• Removable rear cover panel(s) –

• Inner mounting panel

• Disconnect to door handle

• Hinged ﬂ ange door

www.hammondmfg.com

Modular Enclosures

HFMDT - 2DR

ﬂ ange mounted variable depth ﬂ ange operators for disconnect switches up to and including 200 amp and circuit breakers up to 600 amp or Spectra Flex™ cable operators for circuit breakers.

mounted variable depth cable operators for disconnect switches up to 200 amp and circuit breakers up to 600 amp.

depth ﬂ ange mounted operating mechanisms for disconnect switches up to and including 200 amp or cable mechanism for 30, 60 or 100 amp, also circuit breakers with variable depth operators or cable mechanism up to 400 amp.

• NEMA Type 12

• IEC 60529 IP54

required to maintain these standards.

plates

frame(s).

two door version with removable center post

activation hardware

Construction

• Formed 14 gauge steel.

• Fully welded frame with 25mm hole pattern for superior mounting ﬂ exibility.

• Seamless foam in place gasket.

• Reinforced eyebolts are provided for easy enclosure lifting.

• Frames can be joined together with an optional joining kit.

• Doors can be easily interchanged, removed and/or reversed.

• Door opening 135°.

• Optional formed 14 gauge steel side panels are sold separately (in pairs).

• Bonding and grounding studs are provided for all doors and panels.

Finish

• Phosphatized and ﬁ nished in RAL 7035 light gray powder coating.

• Inner panel is unpainted galvanized 12 gauge steel.

Accessories

• 19” mounting rails

• Cooling - ACs

• Cooling - fans

• Door shelf

• Frame joining kit

• Grid mounting system

• Handles and inserts

• Interlock system

• Leveling feet

• Light kit and accessories

• Literature pocket

• Panel - Bridge

• Panel - Barrier

• Swing Panel

• Swing Frame

• Plinth

• Side panels

• Tamper resistant screws

• Top mount cable module

Technical references and CAD downloads available at www.hammondmfg.com All dimensions in inches unless speciﬁ ed otherwise

Quality Products. Service Excellence.