Hammond Manufacturing Eclipse Series Catalog Page

Eclipse Series, Stainless Steel - NEMA 4X

Single Door Enclosures

Corrosion Resistant

Single Door with quarter turns

www.hammondmfg.com

Application

• Designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wallmount

Wallmount Enclosures

applications.

• Impressive styling features like hidden hinges and attractive latching systems make the Eclipse a suitable addition to any high-tech equipment installation.

• A wide range of sizes and practical accessories make this product line a complete package.

Standards

• UL 508 Type 3R, 4, 4X and 12

• CSA Type 3R, 4, 4X and 12

• Complies with

• NEMA 3R, 4, 4X, 12 and 13

• IEC 60529, IP 66

Construction

• Formed 14 or 16 gauge 304 or 316 stainless steel.

• Continuously welded seams ground smooth.

• Door stiffeners are provided where required for increased strength and rigidity - designed to also permit additional mounting options.

• Formed lip on enclosure to exclude ﬂ owing liquids and contaminants.

• Door latches feature the added safety of quarter turn slot requiring use of tool for opening.

• Doors may be easily removed for modiﬁ cations and are interchangeable.

• Seamless poured-in place gasket.

• Collar studs provided for mounting inner panel.

• Includes hardware kit with panel mounting nuts and sealing washers for wall mounting holes.

• Bonding stud provided on door and grounding stud installed in enclosure.

• 3 point latching handle (where applicable) is zinc diecast with black epoxy ﬁ nish.

• Stainless steel hinge pins and quarter turns.

• Door alignment guide provided on 36" wide enclosures.

Finish

• Cover and enclosure are natural stainless steel with a smooth brushed ﬁ nish.

Accessories

• Air conditioners...see page 349-367

• Blowers...see page 392

• Breather kits...see page 400-401

• DIN rails...see page 89

• DIN rail mounting kit...see page 88

• Door stop kit...see page 453

• Door support guide...see page 451

• Drip shield kits...see page 451

• Filter fans...see page 371-384

• Heaters...see page 393-396

• Handles...see page 90

• Inner panel...see page 87

• Quarter turn inserts and keys

...see page 89

• Literature pocket...see page 456

• Mounting foot kit...see page 90

• Swing frame...see page 88

• Swing panel...see page 87

• Replacement hinge pins...see page 88

• Replacement quarter turn assemblies...see page 89

• Thermostats...see page 397

• UL/CSA approved hardware kit

...see page 433

• Padlock Adaptor (EPA)...see page 90

Technical references and CAD downloads available at www.hammondmfg.com All dimensions in inches unless speciﬁ ed otherwise

Quality Products. Service Excellence.