Hammond Manufacturing 500 Series, 519 Series FEATURES
15º & 30º Sloped Consoles (500 & 519 Series)
15º - Steel Base & Back
Aluminum Top
15º - Steel Base
Aluminum Back & Top
30º - Steel Base
Aluminum Back & Top
KEY FEATURES
• 18 ga. steel base for extra strength with vertical rows in sides for ventilation.
• Easy to machine - aluminum top panels are 0.064” (1.6 mm) thick aluminum.
• Sold pre-assembled with a two tone grey powder paint finish (base is dark satin gray, slope top is smooth light grey).
• Comes with four self adhesive rubber feet and required hardware.
• Replacement screws 1421J6 (Pkg. of 6, 6-32 Philips head screws).
kcaBleetS
poTmunimulA
0390-005 º51
0490-005 º51
0590-005 º51
rebmuNtraP
munimulA
poT&kcaB
0190-515 º51
0290-515 º51
0390-515 º51
0490-515 º51
0590-515 º51
0190-915 º03
0290-915 º03
epolS
elgnA
stinU
A B C D E F
hcni0.70.731.22.12.49.2
mm871871450370147
hcni6.70.787.368.22.49.2
mm091871693770147
hcni7.1138.731.22.12.47.3
mm792991450370149
hcni5.40.631.231.16.35.2
mm41125145921946
hcni0.60.631.231.16.35.2
mm25125145921946
hcni4.70.631.231.16.35.2
mm88125145921946
hcni4.70.687.387.26.35.2
mm88125169171946
hcni7.117.731.22.12.45.3
mm792691450370198
hcni5.87.587.368.17.35.2
mm61254169744946
hcni7.319.687.368.10.44.3
mm843571697420168
snoisnemiD
92
Guelph, Ontario (519) 822-2960
St. Laurent, Quebec (514) 343-9010
USA
©
Cheektowaga, NY (716) 651-0086
CANADA
or 30
www.hamm
C + 0.15
B + 0.2
EUROPE
Basingstoke, UK +44 1256 812812
ondmfg.com
AUSTRALASIA
Queenstown, SA, Australia +61 8 8240 2244
Heavy Duty Instrument (511-518 Series)
KEY FEATURES
• 18 ga. steel base and top (front & back panel will not push in from mounted buttons, controls, connectors etc.).
• Sides include two horizontal rows of ventilation.
• Choice of sloping or vertical sides by reversing case.
• Sold pre-assembled with powder paint finish. Top is dark satin grey. Bottom, front & back is smooth light grey.
• Comes with four self adhesive rubber feet and required hardware.
• Replacement screws 1421J6 (Pkg. of 6, 6-32 Philips head screws).
rebmuNtraP stinU
0090-215
0090-115
0090-315
hcni0.352.5578.40.2
mm6733142115
hcni36.30.75.657.2
mm2987156107
hcni57.436.8578.75.3
mm12191200298
htdiW
htgneL
)poT(
snoisnemiD
htgneL
)mottoB(
thgieH
KEY FEATURES
• 18 ga. steel base and top (front & back panel will not push in from mounted buttons, controls, connectors etc.).
• Sides include one horizontal row of louvers for ventilation.
• Choice of sloping or vertical sides by reversing case.
• Includes our handle (part number 1427C1) & holes in the top for mounting. Includes plastic plugs if handle is not used.
• Sold pre-assembled with powder paint finish. Top is dark satin grey. Bottom, front & back is smooth light grey.
• Comes with four self adhesive rubber feet and required hardware.
• Assembled with 8 machine screws into weld-nuts for repetitive assembly & disassembly.
rebmuNtraP stinU
019-815
029-815
hcni57.760.1157.957.4
mm791182842121
hcni57.1136.957.752.6
mm892542791951
htdiW
htgneL
)poT(
snoisnemiD
htgneL
)mottoB(
thgieH
KEY FEATURES
• Heavy duty 0.1” (2.54mm) thick aluminum base and top - for extra strength (front & back panel will not push in from
mounted buttons, controls connectors, etc.). Sides include for horizontal rows of louvers for ventilation.
• Includes heavy duty 0.1” (2.54 mm) thick aluminum - raised mounting panel. Mounting surface includes 8 press nuts for
mounting and a 5” (127 mm) x 8.63” (219 mm) area.
• Front & back is recessed near the top with flange - to act as built in lifting handles.
• Comes with three cord grommets for front & rear holes and required assembly hardware.
• Sold pre-assembled in a light textured - dark grey powder paint finish.
rebmuNtraP stinU
0100-615
Guelph, Ontario (519) 822-2960
St. Laurent, Quebec (514) 343-9010
©
Cheektowaga, NY (716) 651-0086
CANADA
USA
htdiW htgneL thgieH
hcni5.883.4152.9
mm612563532
www.ham
snoisnemiD
mondm
fg.com
Basingstoke, UK +44 1256 812812
EUROPE
AUSTRALASIA
Queenstown, SA, Australia +61 8 8240 2244
93
Loading...