Hammond Manufacturing 1590W Series Catalog Page
Natural & Painted Watertight (1590W Series)
Countersunk lid with
machine screws into
drilled and tapped holes...
Enclosure uses stainless steel
machine screws into threaded holes
with individual neoprene “O” rings...
Vibra finished for a smooth
surface with no sharp edges...
Lap joint construction with a
bead of silicone rubber around
the lid perimeter...
OTHER KEY FEATURES
Low draft angle for easy
P.C. board mounting...
• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Two piece lap joint construction with a bead of silicone rubber around the perimeter provides protection against
access of dust and water. Silicone rubber remains usable from -62 to +232ºC (-80 to +450 ºF)
• Painted version is painted with tough polyester powder paint for a lasting finish, even after machining.
• 4 (or 6 in 1590D, DD & E, 8 in 1590F) 6-32 x 1/2” stainless steel machine screws secure lid - into tapped holes.
• Designed to meet IP65.
• Replacement screws for natural finish series, stainless steel, 6-32 x 1/2” - 1590WMS100
• Replacement black oxide screws for black finish, stainless steel, 6-32 x1/2” - 1590WMS100BK
Countersunk lid with
machine screws into
drilled and tapped holes...
Vibra finished for a smooth
surface with no sharp edges,
then painted with tough
polyester powder paint...
Enclosure uses black stainless steel
machine screws into drilled & tapped
holes with individual rubber “O” rings...
62
Guelph, Ontario (519) 822-2960
St. Laurent, Quebec (514) 343-9010
©
Cheektowaga, NY (716) 651-0086
CANADA
USA
www.hamm
Lap joint construction with a
bead of silicone rubber around
the lid perimeter...
EUROPE
Basingstoke, UK +44 1256 812812
ondmfg.com
AUSTRALASIA
Queenstown, SA, Australia +61 8 8240 2244
Natural & Painted Watertight (1590W Series)
rebmuNtraP
detniapnU kcalB A B
BLLW0951KBBLLW0951
BLW0951KBBLW0951
HW0951KBHW0951
YW0951KBYW0951
AW0951KBAW0951
GW0951KBGW0951
SW0951KBSW0951
BW0951KBBW0951
BBW0951KBBBW0951
UW0951KBUW0951
VW0951KBVW0951
CW0951KBCW0951
QW0951KBQW0951
TW0951KBTW0951
1NW0951KB1NW0951
KKW0951KBKKW0951
KW0951KBKW0951
JW0951KBJW0951
1PW0951KB1PW0951
DDW0951KBDDW0951
DW0951KBDW0951
EW0951KBEW0951
FW0951KBFW0951
1RW0951KB1RW0951
stinU
hcni79.179.138.022.122.1
mm0505121313
hcni99.199.160.163.163.1
mm5.055.05725.435.43
hcni70.205.160.114.168.
mm5.2583729.538.12
hcni26.326.305.107.207.2
mm2929839696
hcni46.325.160.110.398.
mm5.295.83725.675.22
hcni49.379.138.013.343.1
mm00105124843
hcni53.412.375.127.385.2
mm5.0115.18045.495.56
hcni93.443.260.167.317.1
mm5.1115.95725.595.34
hcni76.486.381.140.450.3
mm5.8115.39035.2015.77
hcni07.407.471.270.470.4
mm5.9115.911555.3015.301
hcni07.407.445.370.470.4
mm5.9115.911095.3015.301
hcni27.407.370.290.470.3
mm021495.2540187
hcni27.427.481.190.490.4
mm02102103401401
hcni47.431.371.211.405.2
mm5.0215.97555.4015.36
hcni77.406.293.190.429.1
mm1.121663.538.3017.84
hcni29.429.401.231.431.4
mm52152135501501
hcni29.429.459.272.472.4
mm521521575.8015.801
hcni17.547.377.160.590.3
mm54159545.8215.87
hcni10.642.318.183.584.2
mm351286473136
hcni83.707.403.177.670.4
mm5.7815.911332715.301
hcni83.707.450.257.670.4
mm5.7815.911255.1715.301
hcni83.707.470.357.670.4
mm5.7815.911875.1715.301
hcni83.783.784.257.657.6
mm5.7815.781365.1715.171
hcni55.783.442.229.667.3
mm291111756714.59
Base Detail
Lid Detail
snoisnemiD
C
)diLoN(
E F
.xpA
tfarD
'51°1
'51°1
'51°1
'51°1
'51°1
'51°1
'51°1
'51°1
'51°1
'51°1
'51°1
°2
'51°1
'51°1
'51°1
'51°1
'51°1
°2
°2
Notes: Assembled height =
'51°1
dimension “C” + .16” (4.0 mm). Wall &
lid thickness is roughly .08” (2 mm)
°2
and varies with draft due to part being
cast. Posts “X” exist on parts 1590D,
°2
1590DD & 1590E. Posts “X” & “Y”
exist on part 1590F. For detailed
°2
drawings, CAD files or color photos
visit our website at:
°2
www.hammondmfg.com
Guelph, Ontario (519) 822-2960
St. Laurent, Quebec (514) 343-9010
USA
©
Cheektowaga, NY (716) 651-0086
CANADA
www.ham
mondm
fg.com
Basingstoke, UK +44 1256 812812
EUROPE
AUSTRALASIA
Queenstown, SA, Australia +61 8 8240 2244
63
Loading...