Hammond Manufacturing 1550 Series Catalog Page

Diecast Aluminum Enclosures

1550 Series

www.hammondmfg.com

Features

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.

• Lap joint construction protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.

• Enclosure is vibra ﬁ nished for a smooth surface with no sharp edges.

• Four M3.5 x 0.6 mm stainless steel, Philips head, machine screws secure lid - into factory tapped holes.

• No internal ribs for easy installation of connectors without interference or additional milling.

• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

• Standard version tested to meet IP54

• Watertight version includes pre-cut gasket, and has been designed to meet IP68.

Part Number Overall Dimensions Non Watertight Watertight Units L W

1550A 1550WA inch 3.50 1.38 1.16 0.16

mm 89 35 30 4.10

1550B 1550WB inch 4.51 2.52 1.16 0.16

mm 114.5 64 30 4.10

1550C 1550WC inch 4.56 3.56 2.16 0.16

mm 115.7 90.5 55 4.10

1550D 1550WD inch 4.54 2.54 2.16 0.16

mm 115.3 64.5 55 4.10

1550E 1550WE inch 6.75 4.75 2.16 0.16

mm 171.5 120.6 55 4.10

1550F 1550WF inch 6.75 4.75 4.16 0.16

mm 171.5 120.6 105.7 4.10

1550G 1550WG inch 8.75 5.75 2.17 0.16

mm 222.3 146 55 4.10

1550H 1550WH inch 8.75 5.75 4.16 0.16

mm 222.3 146 105.7 4.10

1550J 1550WJ inch 10.83 6.89 2.56 0.16

mm 275 175 65 4.10

1550K 1550WK inch 5.50 4.00 2.99 0.16

mm 139.7 101.6 76 4.10

1550L 1550WL inch 6.50 5.00 2.99 0.16

mm 165 127 76 4.10

1550M 1550WM inch 4.72 3.94 1.38 0.16

mm 120 100 35 4.10

1550N 1550WN inch 9.84 9.84 3.94 0.17

mm 250 250 100 4.30

1550P 1550WP inch 3.15 2.17 0.98 0.16

mm 80 55 25 4.10

1550Q 1550WQ inch 2.36 2.17 1.18 0.16

mm 60 55 30 4.10

Depth

(With Lid)

Depth of

Lid

Non Watertight Version - IP54

Watertight Version - IP68

Technical references and CAD downloads available at www.hammondmfg.com