Hammond Manufacturing 1490 Series, 1490M Series Catalog Page

Pushbutton Enclosures - NEMA 12, 13

Operator Interface Enclosure

1490/ 1490M Sloped Front Consolet Series

www.hammondmfg.com

Application

• Designed to accept standard heavy duty oil tight pushbuttons, switches and pilot lights.

• Ideal for wall or surface mounting to provide the necessary control slope.

• Provides protection from dirt, dust, oil and water.

Standards

• UL 508 Type 12 and 13

Pushbutton Enclosures

• CSA Type 12 and 13

• JIC standard EGP-1-1967

• Complies with

• NEMA Type 12 and 13

• IEC 60529, IP54

• Appropriate components are required to maintain these standards.

Construction

• Formed 14 gauge steel.

• Smooth continuously welded seams.

• Construction provides either a 30° or 60° slope on front cover depending on mounting position.

• Welded brackets provide for enclosure mounting.

• Captive cover screws thread into sealed wells.

• Larger enclosures provide internally hinged removable covers designed to hold the cover open during wiring (as noted in table).

• Oil resistant gasket and adhesive.

• A bonding stud is provided on the door and a grounding stud is provided in the enclosure.

Finish

• Cover and enclosure are phosphat ized and ﬁ nished in ANSI 61 gray powder coating.

Accessories

• Hole plugs...see page 435

• Pedestals...see page 454

263

Technical references and CAD downloads available at www.hammondmfg.com All dimensions in inches unless speciﬁ ed otherwise

Quality Products. Service Excellence.

www.hammondmfg.com

Pushbutton Enclosures - NEMA 12, 13

1490/ 1490M Sloped Front Consolet Series

Operator Interface Enclosure

Part No.

1490D1 1490D2 1490D3 1490D4 1490G4 1490MG4 1490G6 1490MG6 1490G8 1490MG8 1490H9 1490MH9 1490G10 1490MG10 1490G12 1490MG12 1490J12 1490MJ12 1490G16 1490MG16 1490J16 1490MJ16 1490J20 1490MJ20 1490K25 1490MK25 1490K30 1490MK30

Not hinged

1490MD1

1490MD2

1490MD3

1490MD4

No. Of

Holes A B C F G H L N W Z

1 3.50 3.25 4.88 2.38 3.00 4.03 4.53 3.53 3.56 3.81 2 2 3.50 5.50 4.88 4.63 5.25 1.03 4.53 3.53 5.81 3.81 3 3 3.50 7.75 4.88 6.88 7.50 4.03 4.53 3.53 8.06 3.81 5 4 3.50 10.00 4.88 9.13 8.75 4.03 4.53 3.53 10.31 3.81 6 4 7.25 6.25 6.75 5.38 6.00 7.28 7.78 6.78 6.56 7.56 6 6 7.25 8.50 6.75 7.63 8.25 7.28 7.78 6.78 8.81 7.56 7 8 7.25 10.75 6.75 9.88 10.50 7.28 7.78 6.78 11.06 7.56 9

9 9.50 8.50 7.88 7.63 8.25 9.25 9.75 8.75 8.81 9.81 9 10 7.25 13.00 6.75 12.13 12.75 7.28 7.78 6.78 13.31 7.56 10 12 7.25 15.25 6.75 14.38 15.00 7.28 7.78 6.78 15.56 7.56 11 12 11.75 8.50 9.00 7.63 8.25 11.19 11.69 10.69 8.81 12.06 13 16 7.25 19.75 6.75 18.88 19.50 7.28 7.78 6.78 20.06 7.56 14 16 11.75 10.75 9.00 9.88 10.50 11.19 11.69 10.69 11.06 12.06 14 20 11.75 13.00 9.00 12.13 12.75 11.19 11.69 10.69 13.31 12.06 16 25 14.00 13.00 10.13 12.13 12.75 13.13 13.63 12.63 13.31 14.31 17 30 14.00 15.25 10.13 14.38 15.00 13.13 13.63 12.63 15.56 14.31 19

Pushbutton Enclosures

Ship

Wt. lbs.30.5mm Holes 22.5mm Holes

Technical references and CAD downloads available at www.hammondmfg.com All dimensions in inches unless speciﬁ ed otherwise

Quality Products. Service Excellence.

264