Hammond Manufacturing 1488 Series Catalog Page

1488 Series Consolets - NEMA 12, 13

Hinged Cover Consolets

Operator Interface Enclosure

Application

Designed for use as electric,

• hydraulic or pneumatic control and instrument enclosures. Ideal for ﬂat or surface mounting/

• pedestal to provide the necessary

Consolet Enclosures

30° or 60° control slope. Provides protection from dirt, dust,

• oil and water.

Standards

UL 508 Type 12, 13

• CSA Type 12

•

Complies with

•

NEMA Type 12, 13

•

IEC 60529, IP54

•

, 13

Construction

Formed 14 gauge steel.

• Smooth, continuously welded

• seams. Construction provides either 30° or

• 60° slope on front cover depending on mounting position. Continuously hinged cover may be

• removed by pulling the hinge pin. Captive cover screws thread into

• sealed wells. Oil resistant gasket and adhesive.

• A bonding stud is provided on the

• door and a ground stud is provided on the enclosure.

Finish

Cover and enclosure are

• phosphatized and ﬁnished in ANSI 61 gray powder coating.

Accessories

Pedestals...see page 449

•

278

Technical references and DXF downloads available at www.hammfg.com All dimensions in inches unless speciﬁed otherwise

Quality Enclosures. Service Excellence.

1488 Series Consolets - NEMA 12, 13

Hinged Cover Consolets

Operator Interface Enclosure

Part No. A B C E N L K H J Ship Wt. lbs.

1488EE7 1488EH7 1488EJ7 1488EL7 1488HH9 1488HJ9 1488HL9 1488HN9 1488JJ11 1488JL11 1488JN11 1488JQ11 1488JS11 1488LL13 1488LN13 1488LQ13

8 8 7.16 5.64 7.44 6.63 7.50 8.34 8.34 9 8 12 7.16 5.64 7.44 6.63 11.50 8.34 12.34 11 8 16 7.16 5.64 7.44 6.63 15.50 8.34 16.34 13

8 20 7.16 5.64 7.44 6.63 19.50 8.34 20.34 15 12 12 9.16 7.64 10.90 10.63 11.50 12.34 12.34 16 12 16 9.16 7.64 10.90 10.63 15.50 12.34 16.34 19 12 20 9.16 7.64 10.90 10.63 19.50 12.34 20.34 24 12 24 9.16 7.64 10.90 10.63 23.50 12.34 24.34 26 16 16 11.16 9.64 14.37 14.63 15.50 16.34 16.34 26 16 20 11.16 9.64 14.37 14.63 19.50 16.34 20.34 30 16 24 11.16 9.64 14.37 14.63 23.50 16.34 24.34 39 16 30 11.16 9.64 14.37 14.63 29.50 16.34 30.34 45 16 36 11.16 9.64 14.37 14.63 35.50 16.34 36.34 44 20 20 13.16 11.64 17.83 18.63 18.63 20.34 20.34 37 20 24 13.16 11.64 17.83 18.63 22.63 20.34 24.34 44 20 30 13.16 11.64 17.83 18.63 28.63 20.34 30.34 47

Consolet Enclosures

Technical references and DXF downloads available at www.hammfg.com All dimensions in inches unless speciﬁed otherwise

Quality Enclosures. Service Excellence.

279