Hammond Manufacturing 1472 Series Catalog Page

Type 12 Modular Console Cabinet 1472 Series

Sloped Front

Application

Designed to house electrical, electronic, hydraulic or pneumatic controls
and instruments.
Heavy-duty construction provides protection from dirt, dust, oil and water.
Sloping front control and instrument panels provide an ideal surface for
mounting operator controls or instrumentation.
Interior mounting is provided for with a removable inner panel located on
the rear of the basic console.

Standards

UL 508 Type 12
CSA Type 12

Complies with

NEMA Type 12
IEC 60529, IP65

Construction

Formed 14 gauge steel.
Smooth, continuously welded seams, without knockouts, cutouts or holes.
Sloped front instrument panel is continuously hinged on the front (bottom)
edge and secured with captive panel screws, threaded into sealed wells.
Front instrument panel may be removed by pulling the hinge pin.
Flush doors are secured with a three point latch and operated with a key
locking automotive type handle.
Two door model has overlapping front doors, with three point latch on right
door.
Oil resistant gaskets are permanently secured and mechanically retained.
Includes a removable inner panel formed from 12 gauge steel, mounted to
the back of the enclosure interior.
Collar studs are provided for mounting inner panels.
A bonding stud is provided on the door and a grounding stud is provided in
the enclosure for each door.
A literature pocket is provided.

Finish

Formed and welded from 14 gauge steel.
Sloping instrument panel and vertical rear access are completely
removable.
Oil resistant gaskets are permanently secured and mechanically retained.
Captive panel screws fasten into sealed wells.

Accessories

Quality Products. Service Excellence.

Turret

Part No. B F G H Ship Wt. lbs

1472-24T 24.00 5.00 16.00 3.00 34

1472-36T 36.00 10.00 20.00 6.00 68

1472-48T 48.00 10.00 20.00 6.00 80

Writing Surface

Part No. Width Depth Height Ship Wt. lbs.

1472-24W 24.00 10.00 4.00 9

1472-36W 36.00 10.00 4.00 14

1472-48W 48.00 10.00 4.00 20

Formed and welded from 14 gauge steel.
Fastens to the front of the console with screws

Basic Console

Part No.

Overall Dimensions Clear Opening Door Opening Sub Panel Ship

A B C D E F I J K L M N Height Width Wt. lbs.

1472-24¹ 40.00 24.00 20.00 36.00 17.00 5.00 19.06 27.68 20.25 28.94 2.56 2.62 18.75 27.25 140

1472-36¹ 36.00 36.00 24.00 32.00 20.00 10.00 31.06 21.56 32.25 22.88 4.81 2.00 30.00 32.00 195

1472-48¹,² 36.00 48.00 24.00 32.00 20.00 10.00 43.06 21.56 44.25 22.88 4.81 2.00 42.00 32.00 245

¹ UL Listed
² 2 Door Version

Panel

Console Console Control Panel Turret Instrument Panel Turret Rear Access Panel

Part No. Height Width Opening Size Height Width Opening Size Height Width Opening Size

1472-24 13.96 23.18 12.50 21.50 14.91 23.18 13.37 21.62 12.31 20.18 10.75 18.62

1472-36 13.00 35.18 11.50 33.50 19.18 35.18 17.62 33.62 16.31 32.18 14.75 30.62

1472-48 13.00 47.18 11.50 45.50 19.18 47.18 17.62 45.62 16.31 44.18 14.75 42.62