Hammond Manufacturing 1471 Series Catalog Page

1471 Series Console Cabinet - NEMA 12

Operator Interface Enclosure

Sloped Front, Continuous Hinged Cover Console Cabinet

www.hammondmfg.com

Application

• Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.

• Heavy-duty construction provides

Console Cabinets

protection from dirt, dust, oil and water.

• Sloping front control panel provides an ideal surface for mounting operator controls or instrumentation.

• Interior mounting provision on removable inner panels located on the rear and sides of the enclosure.

Standards

• UL 508 Type 12

• CSA Type 12

• Complies with

• NEMA Type 12

• IEC 60529, IP54

Construction

• Formed 14 gauge steel.

• Smooth, continuously welded seams, without knockouts, cutouts or holes.

• Sloped front instrument panel is continuously hinged on the front (bottom) edge and secured with captive panel screws, threaded into sealed wells.

• Continuously hinged door and front instrument panel may be removed by pulling the hinge pin.

• Doors are secured with a three point latch and operated with a key locking automotive type handle.

• Oil resistant gaskets are permanently secured and mechanically retained.

• Includes three removable inner panels formed from 12 gauge steel, mounted to the back and sides of the enclosure interior.

• Collar studs are provided for mounting inner panels.

• A bonding stud is provided on the door and a grounding stud is provided in the enclosure for each door.

• A literature pocket is provided for the inside of the door.

Finish

• Cover and enclosure are phosphat ized and ﬁ nished in ANSI 61 gray powder coating on the outside and on the inside.

• Removable inner panels are ﬁ nished in white powder coating.

Accessories

• Air conditioners...see page 349-367

• Casters...see page 455

• Door stop kit...see page 453

• Heaters...see page 393-396

• Lock kit...see page 431

• Louvered ventilating plates

...see page 402

• Window kits...see page 449

235

Technical references and CAD downloads available at www.hammondmfg.com All dimensions in inches unless speciﬁ ed otherwise

Quality Products. Service Excellence.