Hammond Manufacturing 1447S Catalog Page

1447S Single Door Disconnect Enclosures - NEMA 12, 13

ABB Controls, Allen Bradley, Cutler Hammer, General Electric, Siemens I-T-E Max-Flex™, Square D

Disconnect

Cutout Detail

Application

Designed to house the following

Wallmount Enclosures

safety disconnect equipment:

•

ABB Controls ﬂange-mounted

variable depth operating mechanism for disconnect switches and circuit breakers. Also cable version for circuit breakers.

Allen Bradley 1494V variable depth

•

ﬂange mounted disconnect switches and circuit breaker operators. Will not accept Allen Bradley 1494F disconnect switches, 1494D circuit breaker operators.

C-H Westinghouse C361 ﬂange

•

mounted variable depth operating mechanism with disconnect switches and C371 ﬂange mounted variable depth operating mechanisms for circuit breakers. Also Flex-Shaft™ handle mechanisms for circuit breakers.

General Electric Type STDA

•

ﬂange handles and variable depth operating mechanism for disconnect switches and circuit breakers. Also SpectraFlex™ cable operators for circuit breakers.

Siemens I-T-E Max-Flex™ ﬂange

•

mounted variable depth handles for disconnect switches and circuit breakers.

Square D class 9422 disconnect

•

switches with ﬂange mounted variable depth operating mechanisms or cable mechanisms and Class 9422 ﬂange-mounted variable depth operating mechanisms or cable mechanisms for circuit breakers. Will not accept Square D Class 9422 bracketmounted disconnect devices, 9422TG1 or TG2 devices.

Technical references and DXF downloads available at www.hammfg.com All dimensions in inches unless speciﬁed otherwise

Standards

UL 508 Type 12, 13

• CSA Type 12, 13

•

Complies with

•

NEMA Type 12 and 13

•

JIC EGP-1-1967

•

IEC 60529, IP54

• Appropriate components are

• required to maintain these standards.

Construction

Formed 14-gauge steel.

•

Continuously welded seams.

•

Larger sizes include door and body stiffeners.

•

Welded brackets provide for enclosure mounting.

•

Formed lip on door and enclosure exclude ﬂowing liquids and contaminants.

•

Cutouts and holes are provided to suit the handle, operating mechanism and door closing mechanism. Continuously hinged doors may be

• removed by pulling the hinge pin. Latch pivots and cover interlock

• brackets are welded to the door. Cover latch bars for door handles

• are provided. Collar studs are provided for

• mounting inner panels.

•

A removable 12 gauge inner panel is included. Oil resistant gaskets are

• permanently secured and mechanically retained.

•

A bonding stud is provided on the door and a grounding stud is provided in the enclosure.

•

A literature pocket is provided.

Note:

Disconnects, operating mechanisms

• and door hardware are not provided with the enclosure, and must be ordered separately from the manufacturer. Enclosures with an "A" dimension

• under 40" require 2 point door closing hardware. Enclosures with an "A" dimension

• 40" or more require 3 point door closing hardware.

Finish

Door and enclosure are

• phosphatized and ﬁnished in ANSI 61 gray recoatable powder coating on the outside.

•

Enclosure interior is ﬁnished in white powder coating. Inner panel is ﬁnished in white

• powder coating.

Accessories

Additional inner panels...see page 433

• Air conditioners...see page 389

• Blowers...see page 406

• Breather kits...see page 423

• Doorstop kits...see page 447

• Drip shield kits...see page 447

• Enclosure stabilizers...see page 451

• Filter fans...see page 413-414

• Floor stand kits...see page 448

• Heaters...see page 418-420

• Thermostats...see page 421

• Window kits...see page 444

•

144

Quality Enclosures. Service Excellence.

1447S Single Door Disconnect Enclosures - NEMA 12, 13

ABB Controls, Allen Bradley, Cutler Hammer, General Electric, Siemens I-T-E Max-Flex™, Square D

Disconnect

Wallmount Enclosures

When A= M=

36 9.00 42 9.88 48 11.38 60 14.38

Technical references and DXF downloads available at www.hammfg.com All dimensions in inches unless speciﬁed otherwise

Quality Enclosures. Service Excellence.

145

1447S Single Door Disconnect Enclosures - NEMA 12, 13

ABB Controls, Allen Bradley, Cutler Hammer, General Electric, Siemens I-T-E Max-Flex™, Square D

Disconnect

Part No.

1447SA8 1447SB8 1447SC8 1447SD8 1447SE8 1447SF8 1447SG8 1447SH8 1447SJ8 1447SK8 1447SL8 1447SA10 1447SB10 1447SC10 1447SD10 1447SE10 1447SF10

Wallmount Enclosures

1447SG10 1447SH10 1447SJ10 1447SK10 1447SL10 1447SE12 1447SG12 1447SH12 1447SJ12 1447SK12 1447SL12 1447S46L12 1447SG16 1447SK16 1447SL16

Center stiffener; N = Not Included I = Included

A B C D E F G

20 21.38 8 17 17 15.38 21.25 51 N 24 21.38 8 21 17 15.38 25.25 60 N 24 25.38 8 21 21 19.38 25.25 71 N 30 21.38 8 27 17 15.38 31.25 74 N 30 25.38 8 27 21 19.38 31.25 87 N 36 25.38 8 33 21 19.38 37.25 98 N 36 31.38 8 33 27 25.38 37.25 121 N 42 31.38 8 39 27 25.38 43.25 135 I 42 37.38 8 39 33 31.38 43.25 154 I 48 37.38 8 45 33 31.38 49.25 172 I 60 37.38 8 57 33 31.38 61.25 248 I 20 21.38 10 17 17 15.38 21.25 52 N 24 21.38 10 21 17 15.38 25.25 63 N 24 25.38 10 21 21 19.38 25.25 71 N 30 21.38 10 27 17 15.38 31.25 80 N 30 25.38 10 27 21 19.38 31.25 90 N 36 25.38 10 33 21 19.38 37.25 100 N 36 31.38 10 33 27 25.38 37.25 126 N 42 31.38 10 39 27 25.38 43.25 143 I 42 37.38 10 39 33 31.38 43.25 193 I 48 37.38 10 45 33 31.38 49.25 180 I 60 37.38 10 57 33 31.38 61.25 255 I 30 25.38 12 27 21 19.38 31.25 100 N 36 31.38 12 33 27 25.38 37.25 130 N 42 31.38 12 39 27 25.38 43.25 150 I 42 37.38 12 39 33 31.38 43.25 200 I 48 37.38 12 45 33 31.38 49.25 220 I 60 37.38 12 57 33 31.38 61.25 265 I 60 37.38 12 57 34.5 31.38 61.25 265 1 36 31.38 16 33 27 25.38 37.25 150 N 48 37.38 16 45 33 31.38 49.25 200 I 60 37.38 16 57 33 31.38 61.25 265 I

Panel Size

Mounting Center

Ship

Wt. lbs

Center

Stiffener

146

Space Occupied by Disconnect

Note: "K" = 4.75 when "C" = 8.00 "K" = 7.09 when "C" = 10.00 "K" = 11.62 when "C" = 12.00 "K" = 11.62 when "C" = 16.00 "K" = 18.38 for 1447S46L12 "P" = Wiring Space

Disconnects will occupy space on panel shown by dimensions "K", "L" and "M".

Wiring space "P" is available when disconnect is installed in the enclosure.

*The disconnect information and space occupied tables based on data supplied by disconnect manufacturer’s bulletins. Hammond Manufacturing not responsible for dimensional accuracy.

Technical references and DXF downloads available at www.hammfg.com All dimensions in inches unless speciﬁed otherwise

Quality Enclosures. Service Excellence.

1447S Single Door Disconnect Enclosures - NEMA 12, 13

Selection Guide

Hammond Series 1447S

ABB Controls

Allen Bradley

Cutler Hammer

General Electric

I-T-E Siemens

Square D

Disconnect Switch

Circuit Breaker

1494V Flange Disconnect Switch

1494V Flange Circuit Breaker

Type C361 Disconnect Switch

Type C371 Circuit Breaker

C-H Westinghouse Circuit Breaker w/FlexShaft

Type STDA Flange Disconnect Switch

Type STDA Flange Circuit Breaker

Circuit Breaker w/SpectraFlex

Max-Flex Flange Disconnect Switch

Max-Flex Flange Circuit Breaker

Class 9422 Disconnect Switch

Class 9422 Circuit Breaker

Class 9422 “T” Disconnect Switch w/ cable mechanism Circuit Breaker w/ cable mechanism

Shaft: 8-12” dp enclosures, use DSFHS-12; 16” dp enclosures, use DSFHS-17

Door Hardware: 2 pt. Latching, use KDH2R; 3 pt. Latching, use KDH3R and FH-3RL

Shaft: 8-12” dp enclosures, use K7FHD-S12; 16” dp enclosures, use K7FHD-S17

Door Hardware: 2 pt. Latching, use FH-DHK; 3 pt. Latching, use FH-DHK and FH-3RL

Handle: Bulletin 1494V-H1 (except for Hammond part # 1447S46L12, use 1494V-H2)

Connecting rod: 8-10” dp enclosures, use 1494V-RA1; 12-16” dp enclosures, use 1494V-RA2

Door Hardware: 2 pt. Latching, use 1494V-L1; 3 pt. Latching, use 1494VL2

Connecting rod: 8-10” dp enclosures, use 1494V-RA1; 12-16” dp enclosures, use 1494V-RA2

Door Hardware: 2 pt. Latching, use 1494V-L1; 3 pt. Latching, use 1494VL2

Door Hardware: 2 pt. Latching, use C361KJ4 or KJ6; 3 pt. Latching,

Handle: 150 amp, use C371H1 or H3; 250-600 amp, use C371H5 or H7

Door Hardware: 2 pt. Latching, use C361KJ4 or KJ6; 3 pt. Latching, use C361KJ4 or KJ6, and C361KR

Door Hardware: 2 pt. Latching, use TDV-1; 3 pt. Latching, use TDV-1 and TDV-3

Flange Mt. Handle: 150-600 amp, use STDA1; SK1200, use STDA3

Door Hardware: 2 pt. Latching, use TDV-1; 3 pt. Latching, use TDV-1 and TDV-3

Door Hardware: 2 pt. Latching, use DKR2; 3 pt. Latching, use DKR3

Handle: Flange mount FHOH (except for Hammond part # 1447S46L12, use FHOHN)

Door Hardware: 2 pt. Latching, use DKR2; 3 pt. Latching, use DKR3

Door Hardware: 2 pt. Latching, use 9423-M4 or M9; 3 pt. Latching, use 9423-M4 or M9, and 9423-M3

Door Hardware: 2 pt. Latching, use 9423-M4; 3 pt. Latching, use 9423-M4 or M9, and 9423-M3

Flange operated switch (fusible or non-fusible)

Handle: DSFHN-HS12

Circuit breaker: ABB

Operating Mechanism: see ABB chart

Handle: K7FHD-HS12

Disconnect switch and operating mechanism: Bulletin 1494V

(except for Hammond part # 1447S46L12, use 1494V-RB2 (2))

Trailer fuse block kit (if required): Bulletin 1494V

Fuse kit (if required)

Line and load connectors (if required)

Circuit breaker: C-H Westinghouse

Operating mechanism: Bulletin 1494V

Handle: Bulletin 1494V-H11

Disconnect switch and operating mechanism

Handle: C361-H1 or H3

use C361KJ4 or KJ6, and C361KR Circuit breaker: C-H Westinghouse

Operating mechanism

Circuit breaker

Complete Flex-Shaft handle mechanism

Disconnect switch Type QMR or QMW

Handle: STDA1 or STDA2

Fuse kit (if required)

Variable depth operating mechanism

Circuit breaker

Handle: STDA1 or STDA2

Variable depth operating mechanism

Circuit breaker

Breaker mounted mechanism.

Operating cable

Disconnect switch: MCS

Fuse Kit (if required)

Handle: Flange mount FHOHS

Switch operator mechanism

Operating cable (standard 36.0”)

Circuit breaker

Pressure wire connectors

Circuit breaker operator mechanism

Operating cable: 125-600 amp, use 36”; 800 amp, use 48”

Disconnect switch and operating mechanism 9422

Handle: Type A-1

Circuit breaker

Operating mechanism: Class 9422

Handle: Type A-1

Disconnect switch and operating mechanism 9422, Type T

Handle: Type A-1

Cable mechanism: Class 9422 CFT_O - 3, 5, or 10 foot

Circuit breaker: Square D

Handle: Type A-1

Technical references and DXF downloads available at www.hammfg.com All dimensions in inches unless speciﬁed otherwise

Disconnect

Wallmount Enclosures

Quality Enclosures. Service Excellence.

147

+ 9 hidden pages