Hammond Manufacturing 1414 Series, EJ Series, PJ Series, 1418, 1422 Accessories Catalog

Panels for 1414, EJ and PJ Series Enclosures

14 gauge steel panels are ﬁnished

• in white.

•

Aluminum panels are 0.080 type 5052 H-32 aluminum, unpainted.

•

14 gauge unpainted galvanized steel. Fiberglass panels in NEMA sizes.

• Steel panels and mounting

• hardware are included with 1414 Series enclosures. Galvanized panels and mounting

• hardware are included with the EJ Series enclosures. Mounting hardware is included with

• PJ Series enclosures, order panel separately.

Steel Part No.

Fiberglass Part No.

Aluminum Part No.

14R0503 14G0503 14R0505 14F0505 14A0505 14G0505 14R0705 14F0705 14A0705 14G0705 14R0707 14G0707 14R0907 14F0907 14A0907 14G0907 14R0909 14G0909 14R1105 14G1105 14R1109 14F1109 14A1109 14G1109 14R1111 14G1111 14R1307 14G1307 14R1311 14F1311 14A1311 14G1311 14R1509 14G1509 14R1513 14F1513 14A1513 14G1513 P1868 F1868 A1868 P2068 F2068 A2068

Galv. Steel Part No.

www.hammfg.com

General Accessories

Panels

Panel

For Use with 1414 and EJ

Length Width Height Width Height Width

4.88 2.88 6 4 — —

4.88 4.88 6 6 7.04 7.04

6.75 4.88 8 6 8.94 7.06

6.75 6.88 8 8 — —

8.75 6.88 10 8 11.08 9.20

8.75 8.88 10 10 — —

10.75 4.88 12 6 — —

10.75 8.88 12 10 13.08 11.20

10.75 10.88 12 12 — —

12.75 6.88 14 8 — —

12.75 10.88 14 12 15.08 13.20

14.75 8.88 16 10 — —

14.75 12.88 16 14 17.22 15.34

16.88 14.88 — — 19.34 17.34

18.44 14.44 — — 20.94 16.94

For Use with

PJ Series

General Accessories

Panels for 1418, 1422, 1447, and Wallmount Enclosures

12 gauge steel ﬁnished in white.

• Larger panels have two or four formed ﬂanges.

• Some larger panels are 10 gauge.

• Panels and mounting hardware are included with 1418,

• 1447 and 1422 Series enclosures.

Part No.

18P0909 18P0921 18P1309 18P1313 18P1515 18P1709 18P1713 18P1717 18P2109 18P2113 18P2117 18P2121 18P2709 18P2713 18P2717 18P2721 18P2727 18P3321 18P3327 18P3333 18P3921 18P3927 18P3933 18P4521 18P4527 18P4533 18P5733 18P6927 18P6933

Length Width Height Width

1

2

1

2

3

2

3

Panel For Use With Enclosure

9 9 12 12

9 21 12 24 13 9 16 12 13 13 16 16 15 15 18 18 17 9 20 12 17 13 20 16 17 17 20 20 21 9 24 12 21 13 24 16 21 17 24 20 21 21 24 24 27 9 30 12 27 13 30 16 27 17 30 20 27 21 30 24 27 27 30 30 33 21 36 24 33 27 36 30 33 33 36 36 39 21 42 24 39 27 42 30 39 33 42 36 45 21 48 24 45 27 48 30 45 33 48 36 57 33 60 36 69 27 72 30 69 33 72 36

Panels

1

Flat Panel 2 2 Formed Flanges

3

4 Formed Flanges

Technical references and DXF downloads available at www.hammfg.com All dimensions in inches unless speciﬁed otherwise

Quality Enclosures. Service Excellence.

433

Cooling Products

General Information

The Need for Environment Control

With wide spread use of micro-electronics in today’s control systems, temperature management takes on a new priority in order to ensure steady and reliable performance. The maintenance of a correct operating temperature may combine both cooling and/ or heating inside an enclosure which can protect against costly down time and system failures.

General Selection Considerations

Cooling

Conditions Solution Advantages Disadvantages

Maximum desired enclosure temperature is 10°F or 5°C above maximum outside ambient.

Maximum desired enclosure temperature lower than maximum outside ambient.

Oversize the enclosure. Easy to implement, no maintenance.

Install ventilation louvers.

Install ﬁlter fans. Less expensive than air/refrigeration

Use an air/air heat exchanger.

Use an air conditioner. Easy to install. Temperature control

Maintains NEMA rating of the enclosure. Economical solution, very little maintenance, easy to implement.

systems. Relatively high amount of heat removed, some termperature control by using thermostats. Easy to install, small power consumption, temperature control via thermostat. Maintains NEMA rating of the enclosure.

via factory installed thermostat. Removes large amounts of heat. Maintains NEMA rating of enclosure, dehumidiﬁes enclosure air.

Dissipates small amount of heat. Larger enclosure size takes up more space. Dissipates limited amount of heat. Dirt, oil or ﬂuids could enter the enclosure. NEMA rating is affected. Must maintain ﬁlters. NEMA rating can be affected. Limited use in hostile environments such as chemical applications. Must maintain ﬁlters.

Must maintain ﬁlter. Generally not to be used when outside temperature is below 59°F (15°) or above 130°F (52°C).

Climate Control

Circulation

Conditions Solution Advantages Disadvantages

Localized heat or 'hot spots'. Install circulation fans

in the enclosure.

Economical solution, no maintenance, easy to install. Maintains NEMA rating of the enclosure.

Dissipates small amount of heat.

Heating

Conditions Solution Advantages Disadvantages

Outside temperature is below minimum allowable equipment operation range.

Condensation occurs. Heat with radiant

Heat with radiant heater.

heater to maintain temperature above the dewpoint.

Economical power consumption. Reliable, can be temperature controlled.

Economical power consumption. Reliable, humidity can be controlled.

Consumes energy, takes up internal panel space.

Technical references and DXF downloads available at www.hammfg.com All dimensions in inches unless speciﬁed otherwise

Quality Enclosures. Service Excellence.

387

Cooling Products

Sizing an Air Conditioner

The proper selection of an air conditioner is determined by the following steps:

Step 1) Internal heat load quoted as Watts that must be dissipated. Step 2) The exposed surface area of the enclosure. Step 3) Temperature differential required between maximum inside temperature and maximum outside ambient. Step 4) Final calculation of the above.

Climate Control

1 Watt = 3.413 BTU/H

Determine the internal heat load

(in Watts) that must be dissipated.

1 m2 = 10.76 ft

Calculate the exposed surface

area of the enclosure:

2(h" x w") + 2(h" x d") + (w" x d")

144

(Example for freestanding enclosure)

2

=Area (ft2)

1°C or 1°K

Deter mine the temperature differential by subtracting the maximum allowable temperature inside the enclosure (T from the maximum ambient temperature outside the enclosure (To).

T=1.8°F

To-Ti = DT

Step Four

(Watts x 3.413) [1.25 x Area ft

The DTS/DTT offering is available in the most popular selection of cooling capacities, sizes, voltages and mounting conﬁgurations. Available capacities range from 1,200 to 16,000 BTU/H in both side mounting and top mounting models. All models use powerful radial fans for maximum air circulation inside the enclosure in ambient temperatures of 125°F (+52°C). Models from 2,000 BTU/H capacity are equipped with thermal expansion valves for optimal use of the evaporator heat exchange surface under all operating conditions. For additional protection of the compressor motor, these valves are supplied as standard with Maximum Operating Pressure control devices (MOP). For energy conservation, the use of hot gas bypass valves is limited to the unloaded starting and control of large compressors from 8,000 BTU/H upwards. All air conditioners were developed, designed and subject to ﬁnal inspections in accordance with international standards.

+ x

2

DT (°F)] = BTU/H

Capacity Required

BTU/H. Capacity Rating.

T

)

i

388

Technical references and DXF downloads available at www.hammfg.com All dimensions in inches unless speciﬁed otherwise

Quality Enclosures. Service Excellence.

Cooling Products

General Speciﬁcations for All Air Conditioners

Construction:

Closed Loop Cooling:

Operating Temperature:

Gasketing:

Templates:

Power:

Filter:

Refrigerants:

Fans:

Condensate Disposal:

Insulation:

Quality Assurance:

Installation Manuals:

Outer shell of sheet steel.

Ambient outside air is never mixed with clean dry enclosure air.

Minimum +46 F (+8 C) Maximum +125 F (52 C). Optional low ambient kit is available

Is provided and/or installed on all units to maintain NEMA ratings speciﬁed.

Provided on all units for easy layout of cutouts and mounting.

Available in 115 V 60 Hz, 110 V 50 Hz and 230 V, 460 50/60Hz 3 phase.

Removable ﬁlter mat made from synthetic ﬁbers are reusable and can be rinsed clean.

All models use environmentally friendly R134a.

All blower motors are thermal protected and sealed with permanent lubricants.

Built in condensate evaporators are standard on most models. All units feature a condensate drain ﬁtting complete with hose attachment.

Cold components, lines and evaporator compartment insulated for maximum efﬁciency and protection against condensation.

Prior to charging, the refrigeration system is hermetically sealed with all joints brazed under protection gas atmosphere to exclude any internal scale. After a thorough leak test every unit undergoes safety and function checks, then is serialized and packed into sturdy boxes prior to shipment.

Included with all models are detail drawings, mounting, schematic and wiring diagrams, a trouble shooting checklist and warranty information.

Product Summary

Side Mount Air Conditioners

Part No. NEMA Protection Rating BTU/H Rated Voltage Hz Height Width Depth

DTS1200A115LG DTS1200A230LG DTS2000A115LG DTS2000A230LG DTS3081A115N4SS DTS3081A230N4SS DTS3041A115LG DTS3041A230LG DTS3500A115LG DTS3500A230LG DTS3141A115LG DTS3161A115N3LG DTS3141A230LG DTS3181A115N4SS DTS3161A230N3LG DTS3181A230N4SS DTS3241A115LG DTS3261A115N3LG DTS3281A115N4SS DTS3241A230LG DTS3261A230N3LG DTS3281A230N4SS DTS8000A115LG DTS8000A230LG DTS12000A115LG DTS12000A230LG DTS9841A460LG

A115 units can be operated 50 Hz at 110 V

12 1,200 115 60 13.00 14.76 7.48 12 1,200 230 50/60 13.00 14.76 7.48 12 2,000 115 60 17.52 12.40 10.04

12 2,000 230 50/60 17.52 12.40 10.04 4X 2,500 115 60 20.15 10.05 10.77 4X 2,500 115 60 20.15 10.05 10.77 12 2,500 115 60 20.15 10.05 10.77 12 2,500 230 50/60 20.15 10.05 10.77 12 3,500 115 60 36.00 15.35 7.87 12 3,500 230 50/60 36.00 15.35 7.87 12 4,000 115 60 29.46 15.55 9.38

3R/4 4,000 115 60 29.46 15.55 9.32

12 4,000 230 50/60 29.46 15.55 9.38 4X 4,000 115 60 29.46 15.55 9.32

3R/4 4,000 230 50/60 29.46 15.55 9.32

4X 4,000 230 50/60 29.46 15.55 9.32 12 7,500 115 60 47.61 15.55 10.65

3R/4 7,500 115 60 47.61 15.55 10.51

4X 7,500 115 60 47.61 15.55 10.51 12 7,500 230 50/60 47.61 15.55 10.65

3R/4 7,500 230 50/60 47.61 15.55 10.51

4X 7,500 230 50/60 47.61 15.55 10.51 12 8,000 115 60 53.15 15.63 10.63 12 8,000 230 50/60 53.15 15.63 10.63 12 12,000 115 60 53.15 15.63 10.63 12 12,000 230 50/60 53.15 15.63 10.63 12 16,000 460 60 60.98 19.09 14.17

Climate Control

Top Mount Air Conditioners

Part No. NEMA

DTT4500A115LG DTT4500A230LG

A115 units can be operated 50 Hz at 110 V and A460 units can be operated at 50Hz at 380V.

Technical references and DXF downloads available at www.hammfg.com All dimensions in inches unless speciﬁed otherwise

Protection

12 4,500 115 60 15.94 23.62 15.35 12 4,500 230 50/60 15.94 23.62 15.35

Rating BTU/H

Rated

Voltage Hz Height Width Depth

Quality Enclosures. Service Excellence.

389

Side Mounting DTS Series

1200 BTU/H

Description

Designed for side mounting where

• hot spot cooling or low capacity cooling is required. Compact design uses minimal

• surface area. Closed loop cooling ensures air is

• recirculated without ever mixing with contaminated ambient air.

Standards

Maintains NEMA 12 rating

• IP 54

• UR, cUR and CE

•

Features

R134a refrigerant.

•

Thermostat control.

•

Continuous air circulation from high capacity fans.

EMI/RFI suppression meets CE.

• Line cord with plug (115 V).

• Washable ﬁlter mat protected within

• an easily removable grill. Gasket, mounting kit and template

• for enclosure cutout and drilling are included. Condensate drain hose and clamp

• provided. Exterior case easily removable for

• ﬁeld service. Q Mount allows unit to hang in

• place for easy installation.

Accessories

Gaskets...see page 400

• Replacement ﬁlters...see page 400

• Replacement grill...see page 400

•

Climate Control

Part Number Ship Wt. lbs

DTS1200A115LG DTS1200A230LG

Technical Data

Electrical Data DTS1200A115LG DTS1200A230LG

Rated Voltage 115 V 60 Hz 230 V 50/60 Hz

Range of Operation 103-127 V 207-253 V Power Consumption 200 W 200 W Running Amps 2.2 A 1.3 A Starting Current Line Cord With plug Without plug

42 42

110 V 50 Hz

15.7 A 9.5 A

Refrigeration Data

Rated Capacity 1,200 BTU/H (350 Watts) Type of Refrigerant Refrigerant Charge Adjustable Thermostat Factory setting +95°F (+35°C) Max. Ambient Air Temp. Min. Ambient Air Temp. Air Capacity (unrestricted) Internal Circulation 106 CFM

Condensate Discharge Direct via tube Filter Mat 150 g/m² Db Noise Level Unit Weight Exterior Case Galvanized sheet steel Finish RAL7035 light grey ﬁnish NEMA Rating Enclosures IP 54/NEMA 12

R134a 280 g

+125°F (+52°C) +46°F (+8°C)

External Circulation 230 CFM

<

62 dB(A)

40 lbs (18 kg)

390

Technical references and DXF downloads available at www.hammfg.com All dimensions in inches unless speciﬁed otherwise

Quality Enclosures. Service Excellence.

Description

Compact design for side mounting

• on any enclosure surface where hot spot cooling or low capacity cooling is required. Closed loop cooling ensures clean

• enclosure air is recirculated without ever mixing with contaminated ambient air.

Standards

Maintains enclosure's NEMA 12

• rating IP 54

• UR, cUR and CE

•

Side Mounting DTS Series

2000 BTU/H

Expansion valve permits increased

• efﬁciency through improved evaporator heat transfer and less frequent compressor operation. Built in condensate evaporator.

• Continuous air circulation from high

• capacity fans. EMI/RFI suppression meets CE.

•

Gasket, mounting kit and template for cutout and drilling are included.

•

Condensate drain hose and clamp. Exterior case easily removable for

• ﬁeld service.

•

Q Mount allows unit to hang in place for easy installation.

Features

R134a refrigerant.

• Thermostat control.

• Line cord with plug (115 V).

• Washable ﬁlter mat protected within

• an easily removable grill.

Part Number Ship Wt. lbs

DTS2000A115LG DTS2000A230LG

Technical Data

Electrical Data DTS2000A115LG DTS2000A230LG

Rated Voltage 115 V 60 Hz 230 V 50/60 Hz

Range of Operation 103-127 V 207-253 V Power Consumption 270 W 230 W Running Amps 2.9 A 1.3 A Starting Current Line Cord With plug Without plug

54 54

110 V 50 Hz

13.8 A 7.4 A

Accessories

Gaskets...see page 400

•

Replacement ﬁlters...see page 400

•

Replacement grill...see page 400

•

Refrigeration Data

Rated Capacity 2,000 BTU/H (580 Watts) Type of Refrigerant Refrigerant Charge Adjustable Thermostat Factory setting +95°F (+35°C) Max. Ambient Air Temp. Min. Ambient Air Temp. Air Capacity (unrestricted) Internal Circulation 230 CFM

Condensate Discharge Condensate evaporator Filter Mat 150 g/m² Db Noise Level Unit Weight Exterior Case Galvanized sheet steel Finish RAL7035 light grey ﬁnish NEMA Rating Enclosures IP 54/NEMA 12

R134a 300 g

+125°F (+52°C) +46°F (+8°C)

External Circulation 230 CFM

<

62 dB(A)

51 lbs (23 kg)

Climate Control

Technical references and DXF downloads available at www.hammfg.com All dimensions in inches unless speciﬁed otherwise

Quality Enclosures. Service Excellence.

391

Side Mounting DTS Series

2500 BTU/H

Climate Control

Description

Compact design for side mounting

• on any enclosure surface where hot spot or low capacity cooling is required. Closed loop cooling ensures clean

• enclosure air is recirculated without ever mixing with contaminated ambient air.

Standards

Maintains enclosure's NEMA 12

• rating IP 54

• UL, cUL and CE

•

Features

R134a refrigerant.

• Thermostat control accessible from

• inside enclosure. Expansion valve increases

• efﬁciency with improved evaporator heat transfer and less frequent compressor operation. Direct condensate discharge via

• drain hose. Continuous air circulation from high

• capacity fans. EMI/RFI suppression meets CE.

• Self-diagnostics on startup.

• Fault indication via LED light.

• Door contact for power down when

• enclosure door is opened. Gasket, mounting kit and template

• for cutout and drilling are included. Condensate drain hose and clamp

• Easy install with "Click & Fit" sys-

• tem

Technical Data

Electrical Data DTS3041A115LG DTS3041A230LG

Rated Voltage 115v 60 Hz 230v 50/60 Hz

110v 50 Hz Range of Operation Power Consumption 690 W 724 W Running Amps 6.0 A 3.3 A Starting Current Line Cord With Plug With Plug

103-127v 207-253v

28 A 14.4 A

Accessories

Gaskets...see page 400

•

Remote door switch...see page 400

•

Part Number Ship Wt. lbs

DTS3041A115LG DTS3041A230LG

Refrigeration Data

Rated Capacity 2500 BTU/H (585 Watts) Type of Refrigerant Refrigerant Charge Adjustable Set Points Factory setting +95°F (+35°C) Max. Ambient Air Temp. Min. Ambient Air Temp. Air Capacity (unrestricted) Internal Circulation 191 CFM

Condensate Discharge Condensate Drain Filter Mat Filterless Db Noise Level Unit Weight Exterior Case Galvanized sheet steel Finish RAL7035 light grey ﬁnish NEMA Rating Enclosures IP 54/NEMA 12

R134a 400 g

+131°F (+55°C) +59°F (+15°C)

External Circulation 88 CFM

<

64 dB(A)

51 lbs (23 kg)

56 56

392

Technical references and DXF downloads available at www.hammfg.com All dimensions in inches unless speciﬁed otherwise

Quality Enclosures. Service Excellence.

Side Mounting DTS Series

3500 BTU/H

Description

Compact design for side mounting

• on any enclosure surface where hot spot or low capacity cooling is required. Closed loop cooling ensures clean en-

• closure air is recirculated without ever mixing with contaminated ambient air.

Standards

Maintains enclosure's NEMA 12

• rating IP 54

• UR, cUR and CE

•

Features

R134a refrigerant.

• Thermostat control.

•

Expansion valve increases efﬁciency with improved evaporator heat transfer and less frequent compressor operation. Built in condensate evaporator.

•

Continuous air circulation from high capacity fans. EMI/RFI suppression meets CE.

• Line cord with plug (115 V).

• Self-diagnostics on startup.

•

Fault indication via LED light. Door contact for power down when

• enclosure door is opened. Washable ﬁlter mat protected within

• an easily removable grill.

•

Gasket, mounting kit and template for cutout and drilling are included. Condensate drain hose and clamp.

• Exterior case easily removable for

• resetting thermostat and ﬁeld service.

•

Q Mount allows unit to hang in place for easy installation.

Accessories

Gaskets...see page 400

• Lifting lugs...see page 400

• Remote door switch...see page 400

• Replacement ﬁlters...see page 400

• Replacement grill...see page 400

•

Climate Control

Refrigeration Data

Part Number Ship Wt. lbs

DTS3500A115LG DTS3500A230LG

99 99

Technical Data

Electrical Data DTS3500A115LG DTS3500A230LG

Rated Voltage 115 V 60 Hz 230 V 50/60 Hz

110 V 50 Hz Range of Operation 103-127 V 207-253 V Power Consumption 590 W 550 W Running Amps 6.7 A 2.9 A Starting Current Line Cord With plug Without plug

Technical references and DXF downloads available at www.hammfg.com All dimensions in inches unless speciﬁed otherwise

17.5 A 8.3 A

Rated Capacity 3,500 BTU/H (1,014 Watts) Type of Refrigerant Refrigerant Charge Adjustable Set Points Factory setting +95°F (+35°C) Max. Ambient Air Temp. Min. Ambient Air Temp. Air Capacity (unrestricted) Internal Circulation 247 CFM

Condensate Discharge Condensate evaporator Filter Mat 150 g Db Noise Level Unit Weight Exterior Case Galvanized sheet steel Finish RAL7035 light grey ﬁnish NEMA Rating Enclosures IP 54/NEMA 12

R134a 480 g

+125°F (+52°C) +46°F (+8°C)

External Circulation 341 CFM

<

64 dB(A)

94 lbs (43 kg)

Quality Enclosures. Service Excellence.

393

Side Mounting DTS Series

4000 & 7500 BTU/H

7500 BTU/H unit shown

Description

Designed for side mounting on

• any enclosure surface where high capacity system cooling is required. Closed loop cooling ensures clean

• enclosure air is recirculated without

Climate Control

ever mixing with contaminated ambient air.

•

Optimum air circulation with maximum clearance distance between warm inlet and cold outlet for reduced hot spot locations.

Standards

Maintains enclosure's NEMA 12

• rating IP 54

• UL, cUL and CE

•

Features

R134a refrigerant.

• Thermostat control accessible from

• inside enclosure. Hot gas bypass valve prevents

• evaporator freeze up while minimizing heavy inrush currents on large BTU/H units.

•

Built in condensate evaporator. Continuous air circulation from high

• capacity fans. EMI/RFI suppression meets CE.

• Self-diagnostics on startup.

•

Fault indication via LED light. Provision for door contact allowing

• power down when enclosure door is opened. Gasket, mounting kit and template

• for enclosure cutout and drilling are included. Condensate drain hose and clamp

• provided. Q Mount allows unit to hang in

• place for easy installation.

Accessories

Gaskets...see page 400

•

Lifting lugs...see page 400

•

Remote door switch...see page 400

•

394

Technical Data

Part Number Ship Wt. lbs.

DTS3141A115LG DTS3141A230LG DTS3241A115LG DTS3241A230LG

Technical references and DXF downloads available at www.hammfg.com All dimensions in inches unless speciﬁed otherwise

99

99 127 127

Electrical Data DTS3141A115LG

Rated Voltage 115 V 60 Hz/ 115 V 60 Hz/

Range of Operation 103-127 V/198-252 V 103-127 V/198-252 V Power Consumption 950 W/860 W 1400 W/1400 W Running Amps 7.2 A/4.0 A 14.6 A/6.3 A Starting Current Line Cord Terminal Block Terminal Block

DTS3141A230LG

230 V 50/60 Hz 230 V 50/60 Hz

17.1 A/9.3 A 26.8 A/16.5 A

DTS3241A115LG DTS3241A230LG

Quality Enclosures. Service Excellence.

Side Mounting DTS Series

4000 & 7500 BTU/H

Refrigeration Data DTS3141A115/ 230LG DTS3241A115/ A230LG

Rated Capacity 4,000 BTU/H (1,172 Watts) 7,500 BTU/H (2,197 Watts) Type of Refrigerant Refrigerant Charge Adjustable Set Points Factory setting +95°F (+35°C) Factory setting +95°F (+35°C) Max. Ambient Air Temp. Min. Ambient Air Temp. Air Capacity (unrestricted) Internal Circulation 350 CFM

Condensate Discharge Condensate Evaporator Condensate Evaporator Filter Mat Filterless Filterless Db Noise Level Unit Weight Exterior Case Galvanized sheet steel Galvanized sheet steel Finish RAL7035 Light Grey powder ﬁnish RAL7035 Light Grey powder ﬁnish NEMA Rating Enclosures IP 54/NEMA 12 Enclosures IP 54/NEMA 12

R134a R134a 500 g 500 g

+125°F (+52°C) +125°F (+52°C) +46°F (+8°C) +46°F (+8°C)

External Circulation 350 CFM

<

70 dB(A)

80 lbs (36 kg) 101 lbs (46 kg)

Internal Circulation 580 CFM External Circulation 580 CFM

<

73 dB(A)

Climate Control

Technical references and DXF downloads available at www.hammfg.com All dimensions in inches unless speciﬁed otherwise

Quality Enclosures. Service Excellence.

395

Side Mounting DTS Series

8000 & 12000 BTU/H

Description

Designed for side mounting on

• any enclosure surface where high

Climate Control

capacity system cooling is required. Closed loop cooling ensures clean

• enclosure air is recirculated without ever mixing with contaminated ambient air.

•

Optimum air circulation with maximum clearance distance between warm inlet and cold outlet for reduced hot spot locations.

Standards

Maintains enclosure's NEMA 12

• rating IP 54

• UR, cUR and CE

•

Features

R134a refrigerant.

• Thermostat control.

•

Hot gas bypass valve prevents evaporator freeze up while minimizing heavy inrush currents on large BTU/H units. Built in condensate evaporator.

•

Continuous air circulation from high capacity fans. EMI/RFI suppression meets CE.

• Self-diagnostics on startup.

• Fault indication via LED light.

•

Provision for door contact allowing power down when enclosure door is opened. Gasket, mounting kit and template

• for enclosure cutout and drilling are included. Washable ﬁltermat protected within

• an easily removable grill. Condensate drain hose and clamp

• provided. Q Mount allows unit to hang in

• place for easy installation. Versatile design maintains foot print

• for larger capacity units if required.

Accessories

Gaskets...see page 400

•

Lifting lugs...see page 400

•

Remote door switch...see page 400

•

Replacement ﬁlters...see page 400

•

Replacement grill...see page 400

•

396

Technical Data

Electrical Data DTS8000A115LG

Part Number Ship Wt. lbs.

DTS8000A115LG DTS8000A230LG DTS12000A115LG DTS12000A230LG

Technical references and DXF downloads available at www.hammfg.com All dimensions in inches unless speciﬁed otherwise

189 189 189 189

Rated Voltage 115 V 60 Hz/ 115 V 60 Hz/

Range of Operation 103-127 V/187-253 V 103-127 V/187-253 V Power Consumption 2,100 W/1,800 W 2,300 W/2,000 W Running Amps 21.0 A/12.5 A 21.0 A/12.5 A Starting Current Line Cord 8' Cord 8' Cord

DTS8000A230LG

230 V 50/60 Hz 230 V 50/60 Hz

52.0 A/46.2 A 52.0 A/46.2 A

DTS12000A115LG DTS12000A230LG

Quality Enclosures. Service Excellence.

Side Mounting DTS Series

8000 & 12000 BTU/H

Refrigeration Data DTS8000A115LG

Rated Capacity 8,000 BTU/H (2,340 Watts) 12,000 BTU/H (3,500 Watts) Type of Refrigerant Refrigerant Charge Adjustable Set Points Factory setting +95°F (+35°C) Factory setting +95°F (+35°C) Max. Ambient Air Temp. Min. Ambient Air Temp. Air Capacity (unrestricted) Internal Circulation 450 CFM

Condensate Discharge Condensate Evaporator Condensate Evaporator Filter Mat 150 g/ m Db Noise Level Unit Weight Exterior Case Galvanized sheet steel Galvanized sheet steel Finish RAL7035 Light Grey powder ﬁnish RAL7035 Light Grey powder ﬁnish NEMA Rating Enclosures IP 54/NEMA 12 Enclosures IP 54/NEMA 12

DTS8000A230LG

R134a R134a 750 g 850 g

+125°F (+52°C) +125°F (+52°C) +46°F (+8°C) +46°F (+8°C)

External Circulation 589 CFM

2

<

69 dB(A)

160 lbs (72 kg) 165 lbs (75 kg)

DTS12000A115LG DTS12000A230LG

Internal Circulation 530 CFM External Circulation 589 CFM

150 g/ m

<

2

69 dB(A)

Climate Control

Technical references and DXF downloads available at www.hammfg.com All dimensions in inches unless speciﬁed otherwise

Quality Enclosures. Service Excellence.

397

Side Mounting DTS Series

16,000 BTU/H

Description

Designed for side mounting on

• any enclosure surface where high capacity system cooling is required. Closed loop cooling ensures clean

• enclosure air is recirculated without ever mixing with contaminated ambient air.

Climate Control

Part Number Ship Wt. lbs

DTS9841A460LG

Technical Data

Electrical Data DTS9841A460LG

Rated Voltage 460v 60Hz 3 phase Range of Operation Power Consumption Running Amps 4.2A / 3.6A Starting Current Line Cord Terminal Block

Refrigeration Data

Rated Capacity 16,000 BTU/H (4,000 Watts) Type of Refrigerant Refrigerant Charge Adjustable Set Points Factory setting +95°F (+35°C) Max. Ambient Air Temp. Min. Ambient Air Temp. Air Capacity (unrestricted) Internal Circulation 882 CFM

Condensate Discharge Condensate Drain Filter Mat Filterless Db Noise Level Unit Weight Exterior Case Galvanized sheet steel Finish RAL7035 light grey ﬁnish NEMA Rating Enclosures IP 54/NEMA 12

210

380v 50Hz / 460v 60Hz

1891W / 2336W

28.3A / 25.2A

R134a 2,100 g

+131°F (+55°C) +59°F (+15°C)

External Circulation 1,076 CFM

<

70 dB(A)

200 lbs (91 kg)

Standards

Maintains enclosure's NEMA 12

• rating IP 54

• UR, cUR and CE

•

Features

R134a refrigerant.

• Thermostat control accessible from

• inside enclosure. Expansion valve increases

• efﬁciency with improved evaporator heat transfer and less frequent compressor operation. Direct condensate discharge via

• drain hose. Continuous air circulation from high

• capacity fans. EMI/RFI suppression meets CE.

• Self-diagnostics on startup.

• Fault indication via LED light.

• Door contact for power down when

• enclosure door is opened. Gasket, mounting kit and template

• for cutout and drilling are included. Condensate drain hose and clamp.

•

Accessories

Gaskets...see page 400

• Lifting lugs...see page 400

• Remote door switch...see page 400

•

398

Technical references and DXF downloads available at www.hammfg.com All dimensions in inches unless speciﬁed otherwise

Quality Enclosures. Service Excellence.