Hammond Manufacturing 1422 Series Catalog Page

1422 Series Two Door Wallmount Enclosures - NEMA 12

Continuous Hinge

Industrial Enclosures

Application

Designed to house electrical,

•

Wallmount Enclosures

electronic, hydraulic or pneumatic controls and instruments. Provides a degree of protection

• from falling dirt, dust, oil and water.

Standards

UL 508 Type 12

• CSA Type 12

•

Complies with

•

NEMA Type 12

•

IEC 60529, IP54

•

Construction

Enclosures are formed 12 or 14

• gauge steel, as noted.

•

Smooth, continuously welded seams without knockouts, cutouts or holes.

•

Body stiffeners are provided in enclosures 30” high or more for extra rigidity.

•

Welded brackets provide for enclosure mounting. Gasketed overlapping doors

• eliminate the need for a center post.

•

Continuously hinged doors may be removed by pulling the hinge pin. Doors are secured with a three

• point latch and operated with a key locking automotive type handle. Latch rods are equipped with rollers

• for easier door closing. Oil resistant gaskets are

• permanently secured. A removable 10 gauge inner panel

• is included in enclosures as noted. Smaller sizes include a 12 gauge

• inner panel. Collar studs are provided for

• mounting inner panels.

•

A grounding stud is provided in the enclosure and a bonding stud is provided on the door. A literature pocket is provided for

• the inside of the door.

Finish

Cover and enclosure are

• phosphatized and ﬁnished in recoatable smooth ANSI 61 gray powder coating on the outside, with white powder coating on the inside. Removable inner panel is ﬁnished in

• white powder coating.

Accessories

Air conditioners...see page 387-405

• Blowers...see page 406

• Breather kits...see page 423

• Door stop kits...see page 447

• Drip shield kits...see page 447

• Enclosure stabilizers...see page 451

• Filter fans...see page 408-413

• Floor stand kits...see page 448

• Gland plates...see page 441

• Heaters...see page 418-420

• Light kit...see page 447

• Louvered ventilating plates

•

...see page 450

Thermostats...see page 421

• Window kits...see page 444

•

Technical references and DXF downloads available at www.hammfg.com All dimensions in inches unless speciﬁed otherwise

Quality Enclosures. Service Excellence.

1422 Series Two Door Wallmount Enclosures - NEMA 12

Continuous Hinge

Industrial Enclosures

Part No.

1422P8 1422PW8 1422P10 1422R10 1422RW10 1422RX10 1422UV12 1422UW12 1422UX12 1422VV12 1422VW12 1422VX12 1422WW12

Body

A B C D E F G H J

24.00 42.00 8.00 14 12 21 39 1.5 22.25 20.13 7.96 79

24.00 48.00 8.00 14 12 21 45 1.5 22.25 23.13 7.96 92

24.00 42.00 10.00 14 12 21 39 1.5 22.25 20.13 9.96 101

30.00 42.00 10.00 14 12 27 39 1.5 28.25 20.13 9.96 112

30.00 48.00 10.00 14 12 27 45 1.5 28.25 23.13 9.96 115

30.00 60.00 10.00 14 12 27 57 1.5 28.25 29.13 9.96 142

36.00 42.00 12.00 14 12 33 39 1.5 34.25 20.13 11.96 134

36.00 48.00 12.00 14 12 33 45 1.5 34.25 23.13 11.96 230

36.00 60.00 12.00 14 12 33 57 1.5 34.25 29.13 11.96 181

42.00 42.00 12.00 14 12 39 39 1.5 40.25 20.13 11.96 152

42.00 48.00 12.00 14 12 39 45 1.5 40.25 23.13 11.96 161

42.13 60.06 12.69 12 10 38 56 2.0 40.25 29.13 11.96 202

48.13 48.06 12.69 12 10 44 44 2.0 46.25 23.13 11.96 350

Gauge

Panel

Gauge

Panel Size

Ship

Wt. lbs.

Wallmount Enclosures

When B= M=

42 9.88 48 11.38 60 14.38

Technical references and DXF downloads available at www.hammfg.com All dimensions in inches unless speciﬁed otherwise

Quality Enclosures. Service Excellence.