Hammond Manufacturing 1414 N4 PH Catalog Page

1414 N4 PH Series Enclosures - NEMA 12, 13, 4

Continuous Hinge, Clamped Cover

Industrial Enclosures

Application

Designed for use as instrument

• enclosures, electric, hydraulic or pneumatic control housings,

Junction Boxes

electrical junction boxes or terminal wiring enclosures. Provides protection where

• equipment may be hosed down or otherwise be very wet, or in outdoor applications for full weather protection.

Standards

UL 508 Type 3R, 4, 12 and 13

•

CSA Type 3R, 4, 12 and 13

Complies with

•

NEMA Type 3R, 4, 12 and 13

•

JIC EGP-1-1967 unless marked

•

IEC 60529, IP66

•

Construction

Body formed from 16 or 14 gauge

• steel. Covers are formed from 14 gauge steel. Smooth, continuously welded

• seams without knockouts, cutouts or holes. Welded brackets provide for

• enclosure mounting. Continuous hinged cover is secured

• with stainless steel clamps and screws. Stainless steel continuous hinge on

• door may be removed by pulling the stainless steel hinge pin.

•

Oil resistant gaskets are permanently secured. All models larger than 4" x 4"

•

include a removable 14 gauge inner panel.

•

Internal threaded weld studs are provided for mounting inner panels.

•

A bonding stud is provided on the door and a grounding stud is provided in the enclosure.

Finish

Cover and enclosure are

• phosphatized, ﬁnished in recoatable smooth ANSI 61 gray powder coating.

•

Removable inner panel is ﬁnished in white powder coating.

Accessories

Additional inner panels...see page 433

• Breather kits...see page 423

• Door clamping hardware

•

...see page 427

Filter fans...see page 408-413

• Heaters...see page 418-420

• Louvered ventilating plates

•

...see page 450

Terminal kit assemblies

•

...see page 436

Thermostats...see page 421

• Window kits...see page 444

• Swing panel...see page 435

•

Technical references and DXF downloads available at www.hammfg.com All dimensions in inches unless speciﬁed otherwise

Quality Enclosures. Service Excellence.

1414 N4 PH Series Enclosures - NEMA 12, 13, 4

Continuous Hinge, Clamped Cover

Industrial Enclosures

Part No. without

Part No.

—

1414N4PHC11414N4PHCLP 1414N4PHG 1414N4PHGLP 1414N4PHE 1414N4PHELP 1414N4PHI 1414N4PHILP 1414N4PHI6 1414N4PHI6LP 1414N4PHK 1414N4PHKLP 1414N4PHL6 1414N4PHL6LP 1414N4PHM6 1414N4PHM6LP 1414N4PHO6 1414N4PHO6LP 1414N4PHM8 1414N4PHM8LP 1414N4PHO10

Does not meet JIC requirements

Inner Panel

1414N4PHA

1414N4PHO10LP

Panel

Dimensions

A B C D E F G H J L T V Y

4 4 3.0 — — — 4.75 2 2.6 5.5 4.31 4.31 3 — — — 1

6 4 3.0 4.88 2.88 2.5 6.75 2 2.6 7.5 6.31 4.31 3 .31 .56 3 2 8 6 3.5 6.75 4.88 3.0 8.75 4 3.1 9.5 8.31 6.31 5 .25 .63 6 5

6 6 4.0 4.88 4.88 3.5 6.75 4 3.6 7.5 6.31 6.31 5 .31 .56 5 4 10 8 4.0 8.75 6.88 3.5 10.75 6 3.6 11.5 10.31 8.31 7 .25 .63 10 9 10 8 6.0 8.75 6.88 5.5 10.75 6 5.6 11.5 10.31 8.31 7 .25 .63 12 11 12 10 5.0 10.75 8.88 4.5 12.75 8 4.6 13.5 12.31 10.31 9 .25 .63 15 14 12 12 6.0 10.75 10.88 5.5 12.75 10 5.6 13.5 12.31 12.31 11 .25 .63 25 24 14 12 6.0 12.75 10.88 5.5 14.75 10 5.6 15.5 14.31 12.31 11 .25 .63 21 20 16 14 6.0 14.75 12.88 5.5 16.75 12 5.6 17.5 16.31 14.31 13 .25 .63 26 24 14 12 8.0 12.75 10.88 7.5 14.75 10 7.6 15.5 14.31 12.31 11 .25 .63 22 20 16 14 10.0 14.75 12.88 9.5 16.75 12 9.6 17.5 16.31 14.31 13 .25 .63 28 26

Cover

Dimensions

Ship

wt. with

Panel

Junction Boxes

Ship wt.

w/o

Panel

Technical references and DXF downloads available at www.hammfg.com All dimensions in inches unless speciﬁed otherwise

Quality Enclosures. Service Excellence.