Included Components
A. Hardware Packet W, with Instructions
B. Parallel Glass Panels (QTY:10) or Blown Glass (QTY:5)
C. Canopy
D. Braided Fabric Cord (QTY:5)
E. Cord grip (QTY:5 — Attached to canopy)
F. If Blown Glass (Set Screws, QTY:10)
G. If Parallel Glass (All Thread & Cylinder Knobs QTY: 20)
H. If Ledgestone Glass (Set Screws, QTY: 20)
Required Tools
1. Allen Key (provided)
2. Philips screw driver (not provided)
3. Wire cutters/strippers (not provided)
4. Measuring tape (not provided)
Canopy
Braided
Fabric
Cord
Blown
Glass
(Aalto shown)
ERP Driver
ESS
Assembly Instructions
Step 1: Feed the braided fabric cord into the canopy until the
desired amount of cord is left between the canopy and light
body. Take into account that a minimum of 6” of cord will be
required for connecting the wiring to the driver.
Step 2: Use the measuring tape to be sure that all of the light
bodies are hanging the proper distance from the canopy. Tighten
the cord grip using a flat blade screw driver. The cord grip is on
the face of the canopy. DO NOT OVER TIGHTEN. THIS
MAY DAMAGE THE FIXTURE.
Step 3: Make Wire Connections to the drivers, mounted inside
of the canopy. The EBR020U-0500-42 driver will be wired in
series with 4 pendants. The ESS010W-0500-12 driver will be
wired with 1 pendant. Braided fabric cord must be wired to the
Driver, black to black and white to red. To wire in series
make the following connections:
WARNING
DO NOT DIRECTLY CONNECT LEDs TO AC
POWER. LEDs will be damaged if exposed to high voltages.
The LED’s must be wired in series to work properly.
Wiring of One Pendant
ESS010W-0500-12
Wiring of Four Pendants
EBR020U-0500-42
LED 1 White
LED 2 White
LED 3 White
LED 4 White
Driver Black
Driver Red
LED 1 Black
LED 2 Black
LED 3 Black
LED 4 Black
Step 5: Mount the canopy to the ceiling using the provided
Mounting Instructions.
Step 6: Attach glass to LED pendant housing:
Gem, Hedra, Rock Crystal, or Aalto Pendant:
Use #4-40 flat head screws provided to attach glass to pendant
housing.
Gem
Hedra
Rock Crystal
Aalto
Ledgestone
Ledgestone Pendant:
Use #8-32 nylon tip set
screws to retain blown
glass
If Axis Pendant:
Slide glass along
retention screws using
slot in glass. Slide
pendant cover over glass
and tighten finial until
snug.
Parallel
Nebula
Axis Blossom
Blossom Pendant:
Screw glass element into threaded
pendant housing
Canopy
Braided
Fabric
Cord
Parallel
Glass
Panel
Both drivers will come wired
as shown below, simply plug
in your ac power source.
NOTE: The Grey and Purple wires are used for 0-10V dimming. If not applicable cap wires. Wires must be capped sepa-
rately, or pendant will dim to zero.
Step 4: Make wire connections from driver to supply. White to
white, black to black, and ground the fixture to the canopy.
If Nebula Pendant: Screw
inner glass into socket. Un-Screw
Glass Retention nut. Raise the Top
Glass Retention Cap up the stem.
Slide Glass Shade over inner glass,
tilt to the side of the glass allowing
the Bottom Glass Retention to slip
inside the Glass Shade, slide the
rest of the Bottom Glass Retention
the rest of the way into the Glass
Shade, Allow the Glass to sit on
the top of the lips of the Bottom
Glass Retention. Lower the Top
Glass Retention Cap, center the
fixture on the Bottom Glass Retention and Secure Retention Nut.
(NOTE: Tighten till Snug. DO
NOT Overtighten!)
Parallel Glass Pendent:
Install glass panels by
unscrewing the cylinder knobs
until glass can be slid into
housing.
Note that the cylinder knobs do
not have to be fully removed
from the fixture to install glass
panels.
Tighten the cylinder knobs,
ensuring that the all thread
passes through the glass panels.
About Hammerton Studio
Warranty
HAMMERTON STUDIO
In 2013, the Hammerton Studio brand was created to offer artisancrafted, contemporary design solutions that are both versatile and
accessible. Hammerton Studio fixtures add contemporary distinction to
entries, great rooms and master suites, yet are cost-effective enough to
use throughout any residential or commercial projects. Like all
Hammerton fixtures, they are designed and fabricated in Salt Lake City,
Utah using domestically sourced materials.
POWERFUL DESIGN
Since 1992, Hammerton has been known for extraordinary decorative
lighting that is boldly designed, expertly rendered, perfectly
proportioned and exquisitely detailed. Each fixture exudes a design
aesthetic that is timeless and enduring, yet remarkably relevant.
UNCOMPROMISING CRAFTSMANSHIP
In addition to their exceptional metalworking and finishing expertise,
Hammerton artisans share an aesthetic eye and a sculptural talent that
define the difference between ordinary and extraordinary craftsmanship.
Every fixture demonstrates its artisan's ability to elevate craft to an art
form.
UNIQUE MATERIALS
Our heritage is in metal fabrication, but our passion is design. As a
result—and unlike most of our peers—we work in a broad palette of
materials: steel and aluminum, blown, kiln-fired and lampworked glass,
acrylics, mica, stone, rawhide, woods and much more. Seamless
integration of these capabilities is the "secret sauce" that drives our
industry leadership as the premier U.S. based custom lighting
manufacturer.
A REPUTATION REFLECTED BY OUR CLIENTS
Hammerton fixtures are as extraordinary as the clients who purchase
them, including Forbes 400 members, Fortune 500 leaders, awardwinning entertainers, fashion and interior designers, sports legends, and
leading luxury hospitality brands.
Hammerton
217 Wright Brothers Drive
Salt Lake City, UT
84116
801-973-8095
info@hammerton.com
www.hammerton.com
ONE YEAR LIMITED WARRANTY
Hammerton, Inc. (Hammerton) warrants the original owner that this
product will be free of defects in material or workmanship for the
period of one year from the date of original purchase from
Hammerton, if (i) the allegedly defective product has not been
abused, misused or improperly maintained and or repaired during
the warranty period, (ii) the defect is not caused by water damage/
flooding, fire, explosion, earthquakes or similar phenomenon, and
(iii) the defect is not caused by improper installation (unless
installed by Hammerton).
In order to obtain warranty service, the user must first complete a
warranty claims form. Hammerton will determine if the product will
be inspected on site or returned to Hammerton. If after the
inspection Hammerton finds that the product is defective as claimed,
Hammerton will, at its option, repair or replace the product free of
charge, or Hammerton may in its sole discretion, refund the
purchase price. Hammerton warrants any replaced or repaired
products for ninety days after shipment or through the end of the
original warranty period, whichever is longer. All products or parts
that are replaced become the property of Hammerton.
No representative or employee of Hammerton is authorized to make
any modification or addition to this limited warranty.
TO THE FULL EXTENT ALLOWED BY LAW, THE
FOREGOING WARRANTY AND REMEDIES ARE
EXCLUSIVE, AND HAMMERTON EXPRESSLY DISCLAIMS
ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING WITHOUT LIMITATION THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE. TO THE FULL EXTENT
ALLOWED BY LAW, HAMMERTON EXCLUDES AND
DISCLAIMS LIABILITY, WHETHER BASED IN CONTRACT
OR TORT (INCLUDING NEGLIGENCE FOR ANY
CONSEQUENTIAL, INDIRECT INCIDENTAL OR SPECIAL
DAMAGES OF ANY NATURE ARISING OUT OF THE SALE
INSTALLATION, MAINTENANCE, USE OR FAILURE OF
THIS PRODUCT, EVEN IF HAMMERTON HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES IN
ADVANCE, AND HAMMERTON LIMITS ITS LIABILITY TO
REPLACEMENT, REPAIR OR REFUND OF THE PURCHASE
PRICE PAID, AT HAMMERTON'S OPTION.)
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS AND/OR DO NOT
ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION ON IMPLIED WARRANTY AND INCIDENTAL
OR CONSEQUENTIAL DAMAGES MAT NOT APPLY TO
YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS YOU MAY HAVE OTHER RIGHTS, WHICH VARY
FROM STATE TO STATE
Assembly Instructions
CHB0039-05, CHB0042-05, CHB0045-05, CHB004905, CHB0050-05, CHB0056-05, CHB0060-05,
CHB0059-05, CHB0066-05, CHB0067-05, CHB006805, CHB0069-05
Parallel
CHB0042-05
Hedra
CHB0045-05
Aalto
CHB0049-05
Rock Crystal
CHB0050-05
Gem
CHB0039-05
Ledgestone
CHB0056-05
WARNING: FAILURE TO INSTALL THIS
FIXTURE PROPERLY MAY RESULT IN
SERIOUS PERSONAL INJURY OR DEATH
AND PROPERTY DAMAGE.
It is recommended that this product be installed by a
licensed electrician who is familiar with proper LED
installation and electrical loads.
Axis
CHB0060-05
CHB0066-05
Blossom
CHB0059-05
Nebula
Rev 8
41-001-00022
5
2
3 4
500-12 Driver
5
1
Tape in Drivers
and Terminal
Blocks
500-42
Driver
5 Pin Terminal
Block 1 2 3 4
Loading...