Hammerall HI-200 Parts Diagram
Job: Item:
qqMODEL HI-150 • 1½ HP
MODEL HI-200•2HP
Food Waste Disposer
3 Phase and
1 Phase
HAMMERMILL DYNAMICS -
occurs between high RPM, swing-type hammers, and a
stainless steel grind screen.
SOLID STEEL-
Hammermill is built for the long haul. Fabricated of rugged
steel plate, using all welded, one-piece construction, it is
finished with a durable powder-coated finish.
Like no other disposer, our
Grind action
ELIMINATES PLUMBING PROBLEMS -
A unique, stainless steel grind screen allows only food
particles of 1/4" or smaller to enter the drain.
QUIET OPERATION -
balanced Hammermill shaft is carried on two heavy-duty,
ball-type bearings, and sealed with two-part, mechanical,
rotary shaft seals.
LEGENDARY DURABILITY
design is engineered to resist jamming and serious
damage when flatware is accidentally introduced into the
grind chamber.
The high RPM, precision
-
The Hammermill
NEMA 4 WATERTIGHT CONTROL
CA-45X
INSTITUTIONAL PACK
q 1 PHASE 3 PHASE
Food Waste Disposer
q
1½ HP
q
HI-150
APPLICATION - Prep Table, Soiled
Dish and Pot Sinks
SPECIFICATIONS:
MOUNTING -
stainless steel legs, and attaches to the underside of the
sink or cone with a 6 / " diameter rubber adapter.
ENCLOSURE -
efficiency, industrial-duty motor are mounted on a powdercoated steel base and surrounded by a powder-coated
housing.
GRINDING ELEMENTS -
is constructed of solid, high-technology steel and steel
alloys, which ensure long-lasting, durable performance.
The disposer rests on four (4) adjustable,
5
8
The belt-driven grind chamber and high
q
q
2HP
q
HI-200
The Hammermill rotor shaft
½" NPT water
inlet
12"
k
Threaded waste
drain 2". Waste
drain is 5" to
14" from floor.
Rubber boot adapter is
adjustable from 4" to 10"
HAMMERALL
k
21½"
Specify floor
drain on new
installation
15¾"
7"j
j Steel Legs
are adjustable
from 5" to 14"
DRAIN SCREEN -
screen has 82.5 square inches of drainable surface area.
Its unique design allows only food particles of ¼" or smaller
to enter the drain.
MOTORS-
are high efficiency and mounted parallel to the grind
chamber, thus protecting them from seal failure related
damage so common in direct drive disposers.
HAMMERALL DISPOSER ELECTRICAL SPECIFICATIONS:
HI-150
HI-151 1 115 / 220 60 17.6 / 8.8
HI-200
HI-201 1 115 / 220 60 20/10
Model Control Electrical
HI-150 CA45-X (208/60/3)
TEFC (Totally Enclosed Fan Cooled) motors
Phase Volts Cycle Amps
3 208 / 230 60 5.3/5.4
3 208 / 230 60 6.5/6.2
SAMPLE SPECIFICATIONS:
qqq
Heavy-duty, 11 GA stainless steel
INSTITUTIONAL PACK
Installation Kit includes:
• Disposer Control: CA-45X
• Solenoid Valve
• Vacuum Breaker
• Stainless Steel Weld-in Ring
Prep Table, Soiled Dish and Pot Sink
HAMMERALL
Loading...