
65W Universal Power Adapter + USB 5V 2.1A

Dear Customer,
thanks for choosing an Hamlet product. Please carefully
follow the instructions for its use and maintenance and,
once this item has run its life span, we kindly ask You to
dispose of it in an environmentally friendly way, by putting
it in the separate bins for electrical/electronic waste, or to
bring it back to your retailer who will collect it for free.
We inform You this product is manufactured with materials and
components in compliance with RoHS Directive 2011/65/EU, with
WEEE Directives 2002/96/CE, 2003/108/CE Italian Legislative
Decree 2005/151 and EMC 2014/30/EU, LVD 2014/35/EU Directives
for the following standards:
EN 55032: 2015
EN 55024: 2010
EN 61000-3-2: 2014
EN 61000-3-3: 2013
EN 60950-1: 2006 + A11: 2009 + A1: 2010 + A12: 2011 + A2: 2013
The complete CE declaration of conformity of the product can be
obtained by contacting Hamlet at info@hamletcom.com.
The information on the importer for your country can be found in the
“About Us” section of the website www.hamletcom.com.
All trademarks and company names mentioned in this manual are
used for description purpose only and remain property of their
respective owners. The material in this document is for information
only and subject to change without notice.

Hamlet Notebook Charger is a 65W universal power adapter that
allows you to charge Notebooks and mobile devices such as
Smartphones and Tablet PCs. The charging cable comes with 8
interchangeable power connectors for the major brands of notebooks
on the market. The integrated USB port also allows you to recharge
your mobile devices at the same time.
• Universal wall charger with EU plug and USB output
• 8 interchangeable charging tips included
• Compatible with notebook, tablet and smartphone
• Short-circuit, over voltage, over current and over temperature
• Input: 100-240V AC 50/60Hz, Output: 18.5V, 19V, 19.5V, 20V
DC (3.5A max), USB output: 5V DC 2.1A

To view the complete compatibility list, please visit the Hamlet
website at www.hamletcom.com/compatibility.aspx.
1. Check the power specifications (V and A) of your notebook and
select the connector that provides the correct voltage by
checking the compatibility list.
2. Insert the connector into the power socket of your notebook to
check for physical compatibility (do not connect the power supply
to the electrical outlet at this time!).
3. Then insert the connector to the power cable and the latter to the
DC OUTPUT of the power adapter.
4. Plug the power adapter into the wall outlet.
To recharge your tablet or smartphone, connect the recharging cable
of the device to the USB port of the power adapter.

Always make sure you use a power supply that provides the correct
voltage to your notebook. The voltage can be found on the bottom
side of the notebook, on the original power supply or in its instruction
manual, denoted by V or Volts.
• This device is intended for indoor use only.
• Keep away from direct sunlight, high temperatures, liquids or
• Keep out of reach of children.
• To ensure the best connection and avoid overheating of the plug:
o Always use the recommended connector shown in the
o Insert the connector by pushing it down into the socket of the
notebook. In most models you hear a click when the
connector is inserted correctly.
• Be sure to connect only notebooks which require a power less
than or equal to 65 watts.
• Make sure the wall outlet is supplying the same type of power
source indicated on the device with regard to the voltage (V) and
frequency (Hz).
• Before use, check that the device, the power cable and the wall
outlet are not damaged in any way.
• Make sure that the device is not placed on surfaces sensitive to
heat and that the adapter has sufficient ventilation.
Hamlet is not responsible and is not liable for any damage or
malfunction to the power supply and/or notebook resulting by
improper use of the product. For detailed information and support
you can contact Hamlet at www.hamletcom.com.