Ham-Let H-1300 SERIES Data Sheet

METERING VALVES
H-1300 SERIES
VALVES & ACTUATORS
H, HF & HXF-1300 SERIES FEATURES
n
n
Straight and Angle Patterns and Panel Mounting
n
MAWP 2000 psig - (137 Barg) For HXF
n
MAWP 1000 psig - (68 Barg) For H, HF
n
MAWT 400°F (204°C)
n
Flow coefcients (Cv) from 0.004 to 0.15
n
Round & Slotted Handles with Screwdriver Slots
n
HAM-LET LET-LOK® Ends, Male & Female
NPT, HTC® Face Seal Bead End Connections
n
1°, 3° and 5° Stem Taper for required ow control
n
Stem with Stopper Shoulder for maximum life
HXF-1300 MATERIALS OF CONSTRUCTION
Item
No.
1
2
3
4
5
6
7
8
9
10
11
12
* Warning: Handle Set Screw is factory calibrated and should not be adjusted
in order to defend the HF and HXF stem from being harmed
Components Qty
Handle Set Screw* 1 18-8 Stainless Steel Flow Fixing Screw Handle 1 St.St. ASTM A-276 Brass ASTM B-16 Panel Nut Safety Bonnet Sleeve 1 St.St. ASTM A-276 Brass ASTM B-16 Bonnet Stem 1 St.St. 174PH/A564 Stem Ring O-ring 1 Fluorocarbon FKM Guide Ring Orice 1 St.St. ASTM A-276 Brass ASTM B-16 Body
1 18-8 Stainless Steel
1 St.St. ASTM A-276 Brass ASTM B-16
1 St.St. ASTM A-276 Brass ASTM B-16
1 Glass-lled TFE
1 Glass-lled TFE
1 St.St. ASTM A-182 Brass ASTM B-283
Valve Body Material
316 St.St. Brass
GENERAL
The H-1300 Series is a moderate-pressure instrumentation flow-regulating needle valve. It is generally used for instrumentation panels, sampling systems and accurate applications. The valves are compact in size and structure and offer reliable low and moderate flow regulation with long service life.
*
1
2
4
5
Safety Bonnet Sleeve prevents bonnet release from body.
6
6
3
VALVES & ACTUATORS
HXF SERIES STRAIGHT VALVE
Stem Upper Shoulder (for safe full opening) prevents locking between stem and bonnet
Tapered Stem Tip controls accurate gas
and liquid ow rate
Lock Set Screw helps determine
required ow
(slotted handles)
Safety Bonnet Sleeve
Guide Ring keeps the stem concentric to
the orice
7
8
9
10
11
12
METERING VALVES H-1300 SERIES
246
CLEANING & PACKAGING
Every H-1300 series needle valve is cleaned in accordance with Standard Cleaning and Packaging (procedure 8184). Oxygen Clean & Lubricant Free Cleaning and packaging, in accordance with Special Cleaning and Packaging (procedure 8185), is available as an option. Lubricant free cleaned valves have signicantly higher actuation torque and MAWP* 1000 psi.
* Maximum Allowed Working Pressure.
H&HF-1300 MATERIALS OF CONSTRUCTION
Item
No.
1
2
3
4
5
6
7
8
9
10
* Warning: Handle Set Screw is factory calibrated and should not be adjusted
in order to defend the HF and HXF stem from being harmed
Components Qty
Handle Set Screw* 1 St.St. ASTM A-276 Brass ASTM B-16 Flow Fixing Screw Handle 1 St.St. ASTM A-276 Panel Nut Safety Bonnet Sleeve 1 St.St. ASTM A-276 Brass ASTM B-16 Bonnet Stem 1 St.St. 174PH/A564 O-ring Guide Ring 1 Glass-lled TFE Body
1 18-8 Stainless Steel
1 St.St. ASTM A-276 Brass ASTM B-16
1 St.St. ASTM A-276 Brass ASTM B-16
1 Fluorocarbon FKM
1 St.St. ASTM A-182 Brass ASTM B-283
Valve Body Material
316 St.St. Brass
*
1
3
2
4
5
6
HF SERIES ANGLE VALVE
Stem Upper Shoulder (for safe full opening) prevents locking between stem and bonnet
Safety Bonnet Sleeve
Tapered Stem Tip controls accurate gas
and liquid ow rate
Lock Set Screw helps determine required
ow (slotted handles)
Guide Ring keeps the stem
concentric to the orice
7
9 8
VALVES & ACTUATORS
10
HAM-LET ADVANCED CONTROL TECHNOLOGY
247
VALVES & ACTUATORS
STANDARD CONFIGURATION DIMENSIONS
Basic
Ordering
Number
H-1300
Angle
H-1300
Straight
Stem
Orice
Taper
mm/in mm in mm in mm in mm in mm in
Angle
3.3mm
Cv Inlet Outlet
1/4'' LET-LOK 6MM LET-LOK 1/4'' LET-LOK®1/4'' LET-LOK®71.5 2.81 59.5 2.34 - - 32.0 1.26 14.8 0.58
0.13
0.13"
Max
3/8'' LET-LOK 6MM LET-LOK
®
®
®
®
1/4'' Male NPT 1/4'' Male NPT 71.5 2.81 50.8 2.00 - - 32.0 1.26 14.8 0.58
®
®
®
®
HF-1300
Angle
1/8'' LET-LOK 1/4'' LET-LOK 3MM LET-LOK 6MM LET-LOK
1/8'' Male NPT 1/8'' Male NPT 77.0 3.03 19.0 0.75 19.0 0.75 27.0 1.06 14.8 0.58 1/4'' Male NPT 1/4'' Male NPT 83.0 3.27 25.0 0.98 26.0 1.02 27.0 1.06 14.8 0.58 1/8'' Male NPT 1/8'' LET-LOK 1/4'' Male NPT 1/4'' LET-LOK
0.03 1/8'' Female NPT 1/8'' Female NPT 82.5 3.25 24.9 0.98 24.9 0.98 27.0 1.06 14.8 0.58
Max
1/8'' LET-LOK®1/8'' LET-LOK®70.6 2.78 51.3 2.02 - - 27.0 1.06 14.8 0.58 3MM LET-LOK 6MM LET-LOK 1/4" LET-LOK
®
®
®
1/8'' Male NPT 1/8'' Male NPT 70.6 2.78 38.1 1.50 - - 27.0 1.06 14.8 0.58
HF-1300 Straight
1.4mm
0.055"
1/4'' Male NPT 1/4'' Male NPT 70.6 2.78 49.8 1.96 - - 27.0 1.06 14.8 0.58 1/8'' Female NPT 1/8'' Female NPT 70.6 2.78 49.3 1.94 - - 27.0 1.06 14.8 0.58 1/4"' Male Face Seal 1/4'' Male Face Seal
®
®
®
®
®
®
HXF-
1300
Angle
HXF-
1300
Straight
1/8'' LET-LOK 1/4'' LET-LOK 3MM LET-LOK
1/8'' Male NPT 1/8'' LET-LOK 1/4'' Male NPT 1/4'' LET-LOK
0.8 mm
0.03''
1/8'' Male NPT 1/8'' Male NPT 84.4 3.32 24.9 0.98 24.9 0.98 23.4 0.92 14.8 0.58
0.004 1/4'' Male NPT 1/4'' Male NPT 84.4 3.32 24.9 0.98 24.9 0.98 23.4 0.92 14.8 0.58
Max
1/8'' LET-LOK®1/8'' LET-LOK®59.6 2.34 48.0 1.89 - - 24.4 0.96 14.8 0.58 1/4'' LET-LOK 3MM LET-LOK 6MM LET-LOK
1/4'' Male NPT 1/4'' Male NPT 59.6 2.34 48.0 1.89 - - 24.4 0.96 14.8 0.58 1/4'' Male Face Seal 1/4'' Male Face Seal
A-Open B C D E
1/4'' LET-LOK®95.7 3.77 29.6 1.17 30.0 1.18 26.0 1.02 14.8 0.58 6MM LET-LOK®95.7 3.77 29.6 1.17 30.0 1.18 26.0 1.02 14.8 0.58
3/8'' LET-LOK®71.5 2.81 62.4 2.46 - - 32.0 1.26 14.8 0.58 6MM LET-LOK®71.5 2.81 59.5 2.34 - - 32.0 1.26 14.8 0.58
1/8'' LET-LOK®83.5 3.29 25.8 1.02 25.8 1.02 27.0 1.06 14.8 0.58 1/4'' LET-LOK®85.0 3.35 28.0 1.10 28.0 1.10 27.0 1.06 14.8 0.58 3MM LET-LOK®83.5 3.29 25.8 1.02 25.8 1.02 27.0 1.06 14.8 0.58 6MM LET-LOK®85.0 3.35 28.0 1.10 28.0 1.10 27.0 1.06 14.8 0.58
®
77.0 3.03 25.8 1.02 19.0 0.75 27.0 1.06 14.8 0.58
®
81.5 3.2 28.3 1.11 23.5 0.92 27.0 1.06 14.8 0.58
3MM LET-LOK®70.6 2.78 51.3 2.02 - - 27.0 1.06 14.8 0.58 6MM LET-LOK®70.6 2.78 55.9 2.20 - - 27.0 1.06 14.8 0.58 1/4" LET-LOK®70.6 2.78 55.9 2.20 - - 27.0 1.06 14.8 0.58
70.6 2.78 52.3 2.06 - - 27.0 1.06 14.8 0.58
1/8'' LET-LOK®84.4 3.23 24.8 0.98 24.8 0.98 23.4 0.92 14.8 0.58 1/4'' LET-LOK®85.0 3.35 26.0 1.02 26.0 1.02 23.4 0.92 14.8 0.58 3MM LET-LOK®84.4 3.32 24.8 0.98 24.8 0.98 23.4 0.92 14.8 0.58
®
77.5 3.05 24.8 0.98 24.8 0.98 23.4 0.92 14.8 0.58
®
82 3.22 27.3 1.07 24.8 0.98 23.4 0.92 14.8 0.58
1/4'' LET-LOKv 59.6 2.34 51.9 2.04 - - 24.4 0.96 14.8 0.58 3MM LET-LOK®59.6 2.34 48.0 1.89 - - 24.4 0.96 14.8 0.58 6MM LET-LOK®59.6 2.34 51.9 2.04 - - 24.4 0.96 14.8 0.58
59.6 2.34 52.0 2.05 - - 24.4 0.96 14.8 0.58
F
29 mm
1.14''
12.5 mm
0.5''
12.5 mm
0.5''
12.5 mm
0.5''
12.5 mm
0.5''
Dimensions are for reference only, and are subject to change.
MAX PANEL THICKNESS
“HXF” Series - 4.3 mm (0.17'') “H” and “HF” - 3.3 mm (0.13'')
METERING VALVES H-1300 SERIES
248
TESTING
The H, HF and HXF Series metering valve designs have been tested for Proof and Burst. Every H,HF & HXF-1300 metering valve is factory tested with Nitrogen at 1000 psig (69 bar) for proper assembly, using leak detection.
FLOW DATA AT 70ºF (20ºC)
FLOW SETTING
H-1300 series metering valve is tested for bubble tight shut­off at 100 psig (6.8 bar) differential pressure.
HF-1300 series metering valve handle dead stop is set at 4 to 10 std cm3/min with 5 psig (0.34 bar) inlet pressure.
HXF-1300 series metering valve handle dead stop is set at 4 to 10 std cm3/min with 15 psig (1.0 bar) inlet pressure.
HF-1300 METERING VALVE 3° STEM H-1300 METERING VALVE 5° STEM
0.15
0.14
0.12
0.1
0.08
0.06
0.04
Flow Coefcient (Cv)
0.02
0 2 4 6 8 10 11
Handle Turns
Pressure Drop
to Atmosphere
psi (bar)
Maximum Flow
Coefcient
(Cv) 0.15
HXF-1300 METERING VALVE 1° STEM
0.004
0.0035
0.003
0.0025
0.002
0.0015
0.001
Flow Coefcient (Cv)
0.0005
10 (0.68) 0.47 (1.7) 1.6 (45.3)
50 (3.4) 1.0 (3.7) 4.5 (127)
100 (6.8) 1.5 (5.6) 7.9 (223)
0 2 4 6 8 10 11
Water Flow U.S gal/min
(L/min)
Handle Turns
Air Flow std ft3 / min (std L / min)
0.03
0.025
0.02
0.015
0.01
0.005
Flow Coefcient (Cv)
0 3 6 9 11
Maximum Flow
Coefcient
(Cv) 0.03
Handle Turns
Pressure Drop
to Atmosphere
psi (bar)
10 (0.68) 0.09 (0.34) 0.33 (9.3)
50 (3.4) 0.21 (0.79) 0.9 (25.4)
100 (6.8) 0.3 (1.1) 1.5 (42.4)
Water Flow U.S gal/min
0.83” (Ø 21.0)
(L/min)
Air Flow std ft3 / min (std L / min)
1.82”(46) Open
VALVES & ACTUATORS
Maximum Flow
Coefcient (Cv)
0.004
Pressure Drop
to Atmosphere
psi (bar)
10 (0.68) 0.01 (0.03) 0.04 (1.1)
50 (3.4) 0.02 (0.07) 0.1 (2.8)
100 (6.8) 0.04 (0.15) 0.2 (5.5)
Water Flow
U.S gal/min
(L/min)
Air Flow std ft3 / min (std L / min)
HAM-LET ADVANCED CONTROL TECHNOLOGY
Panel Thickness
249
TECHNICAL DATA
Pressure - Temperature Ratings Orice
Series
H
HF
HXF
Fluorocarbon FKM is a standard O-ring for H,HF,HXF-1300
*
Shutoff Service: In Stainless Steel constructions only.
H-1300 Series valves are not recommended for shutoff in vacuum or gas service or for repetitive shutoff in liquid service.
O-ring Material
Buna N
Ethylene Propylene
Fluorocarbon FKM
Peruor
Polychloroprene (CR)
Temperature Rating
-10 to 300 (-23 to 149)
-10 to 300 (-23 to 149)
-15 to 400 (-26 to 204)
-0 to 300 (-18 to 149)
-10 to 250 (-23 to 121)
HANDLE OPTIONS
°F (°C)
Shutoff
Pressure psig (bar) inch mm
1000 (68.9) 0.13 3.3 *Yes
1000 (68.9) 0.055 1.4 No
2000 (138) 0.03 0.8 No
Service
Angle
VALVES & ACTUATORS
Vernier Handle
Optional for H, HF & HXF
Round Aluminum Handle*
Standard for H
* Black is Standard. Colored Handles are available upon request, see "Ordering Information"
Metal Slotted Handle
Standard for HF. Optinal for H.
Metal Slotted Handle
Standard for HXF.
METERING VALVES H-1300 SERIES
250
H-1300 ORDERING INFORMATION
OPTIONAL
H-13
-
00
Valve Series
H-13 HF-13 HXF-13
* Not suitable for shut-off application
- 5° stem taper
- 3° stem taper*
- 1° stem taper*
Valve Type
- LET-LOK® End
00
- Female End
10
- Male End
80
- Male to LET-LOK® End
95
Body and Ends Material
-
St.St. 316
SS
-
Brass
B
SEAL KIT
Z - 1300
SK
Body Designator per end connection
for all end connections
1/4
-
- -
End Connection
- LET-LOK
L
- Threaded NPT
N
- Male Face Seal
GL
- ONE-LOK
HL
®
®
End Connection Size
1/8 3 MM 1/4 6 MM 3/8
Pattern Valve Type
-
S A
Straight Port Valve
-
Angle Port Valve
1/4 SL
-
- - -SS
O-ring Material
- EPDM,
EP
- Polychloroprene (CR)
NE
- Peruor
KZ
- Buna-N
BU
Fluorocarbon FKM O-rings are standard
Handle Options
- Vernier Handle
VER
- Red Aluminum Handle*
RH
- Yellow Aluminum Handle*
YH
- Green Aluminum Handle*
GH
- Blue Aluminum Handle*
BH
* for H-1300 only
Treatment
BLANK OC LF
- Standard Cleaning & Passivation
- Oxygen Clean
- Lubricant Free
HANDLE KIT
Handle Kit contains handle + set screw.Seal Kit contains O-ring
1/4 VI---
O-Ring material
Fluorocarbon FKM
VI EP
EPDM
NE
Polychloroprene (CR)
KZ
Peruor
BU Buna-N
Z - 1300
Handle Options
1/4
HK
-
For all end connections
1/4 VER--
-
Handle Options
- Vernier Handle
VER
- Red Aluminum Handle*
RH
- Yellow Aluminum Handle*
YH
- Green Aluminum Handle*
GH
- Blue Aluminum Handle*
BH
- Metal slotted Handle**
MF
- Metal slotted Handle***
MXF
* For H-1300 only **For HF-1300 only ***For HXF-1300 only
VALVES & ACTUATORS
Warning!
The system designer and user have the sole responsibility for selecting products suitable for their special application requirements, ensuring their safe and trouble-free installation, operation, and maintenance. Application details, material compatibility and product ratings should all be considered for each selected product. Improper selection, installation or use of products can cause property damage or personal injury.
H-1300,
Rev 10 January 2015
HAM-LET ADVANCED CONTROL TECHNOLOGY
251
Loading...