Hamlet Exagerate XFW2EXC User Manual

EXPRESS CARD FIREWIRE
2 Port FireWire 400 ExpressCard/34
USER MANUAL
XFW2EXC
www.hamletcom.com
We inform You this product is manufactured with materials and components in compliance with ROHS directives: 2002/95/CE; with RAEE Directives: 2003/96/CE, Italian Legislative Decree 2005/151 and below EEC Directives: EN 55022: 2006+A1: 2007, EN 55024: 1998+A1: 2001+A2: 2003, EN 61000-3-2: 2006, EN 61000-3-3: 1995+A1: 2001+A2: 2005.
Trademarks
All trademarks and company names mentioned in this manual are used for description purpose only and remain property of their respective owners.
Changes
The material in this document is for information only and subject to change without notice. Hamlet reserves the right to make changes or revisions in the product design or the product manual without reservation and without obligation to notify any person of such revisions and changes.
Introduction
System Requirements
Windows 2000/XP/Vista
One available ExpressCard slot
Package Contents
2 port FireWire 400 ExpressCard
6pin-4pin FireWire cable
Resource CD
User Manual
Installation
1. Insert the card into an available ExpressCard slot.
2. The system will detect the new device and install the required driver automatically.
Verifying the installation
Follow the instructions in this section to verify that the controller was installed correctly.
1. Right click the My Computer icon, select Properties, left click on the Hardware tab and then on the Device Manager button.
2. Double click on “IEEE 1394 Bus host Controllers”. If there is no yellow ! or ? in front of “Texas Instruments OHCI Compliant IEEE 1394 Host Controller” the driver has started correctly.
3. To view information about the devices attached to the controller, right click on Devices and select Properties from the context menu, then select the tab labelled General.
Loading...