Ham-Let 771LOB, 772LOB Catalog Page
TUBE TO SAE/MS STRAIGHT THREAD BOSS (POSITIONABLE)*
771 LOB
MALE RUN TEE
772 LOB
MALE BRANCH TEE
Ordering
Information
771LOB SS
1/4 X 7/16-20
POS.
771LOB SS
3/8 X 9/16-18
POS.
* Per SAE J1926 and MS 16142. See page 80 for mounting dimensions.
** O-rings used are Fluorocarbon FKM 90 Durometer. Other O-ring materials are available on request.
A
Tube O.D.TSAE/MS
inch mm inch inch mm inch mm inch inch mm inch mm inch mm inch mm inch mm inch mm Dash No.
1/4 6.35 7/16-20 .19 4.8 1/2 12.7 9/16 .83 21.10 1.12 28.45 1.12 28.45
3/8 9.52 9/16-18 . 28 7.1 5/8 15.9 11/16 .97 24.64 1.26 32.00 1.27 32.26
DW
Wrench FlatWaHex. Flat
N E E1
POSITIONABLES
PER SAE J1926 AND MS 16142
L M I O-ring**
.39
9.9 .65 16.5 .60 15.2 -904
.44
11.2 .79 20.1 .66 16.8 -906
CONNECTORS
TUBE TO SAE/MS STRAIGHT THREAD BOSS (POSITIONABLE)*
Ordering
Information
772LOB SS
1/4 X 7/16-20
POS.
772LOB SS
3/8 X 9/16-18
POS.
* Per SAE J1926 and MS 16142. See page 80 for mounting dimensions.
** O-rings used are Fluorocarbon FKM 90 Durometer. Other O-ring materials are available on request.
“D” - Dimension is minimum opening. Dimensions are for reference only, and are subject to change without notice.
A
Tube O.D.TSAE/MS
inch mm inch inch mm inch mm inch inch mm inch mm inch mm inch mm inch mm inch mm Dash No.
1/4 6.35 7/16-20 .19 4.8 1/2 12.7 9/16 .83 21.10 1.12 28.45 1.12 28.45
3/8 9.52 9/16-18 . 28 7.1 5/8 15.9 11/16 .97 24.64 1.26 32.00 1.27 32.26
HAM-LET ADVANCED CONTROL TECHNOLOGY
DW
Wrench FlatWaHex. Flat
N E E1
L M I O-ring**
.39
9.9 .65 16.5 .60 15.2 -904
.44
11.2 .79 20.1 .66 16.8 -906
79
Loading...