Ham-Let 739LMR Catalog Page

739 LMR

MALE ADAPTER TUBE TO PIPE

TUBE (METRIC) MALE PIPE

CONNECTORS

739LMR _ 6 X 1/8 6 R-1/8 4.0 12 15.7 32.8

739LMR _ 6 X 1/4 6 R-1/4 4.0 14 15.7 38.1

739LMR _ 6 X 1/2 6 R-1/2 4.0 22 15.7 43.4

739LMR _ 8 X 1/8 8 R-1/8 4.8 12 16.8 33.5

739LMR _ 8 X 1/4 8 R-1/4 5.6 14 16.8 39.1

739LMR _ 8 X 3 /8 8 R-3/8 5.6 11/ 16 i n ch 16.8 37.8

739LMR _ 10 X 1/4 10 R-1/4 7.1 14 17.5 39.9

739LMR _ 10 X 3/ 8 10 R-3/8 7.1 18 17.5 40.6

739LMR _ 10 X 1/2 10 R-1/2 7.1 22 17.5 46.2

739LMR _ 12 X 1/4 12 R-1/4 7.1 16 23.1 46.5

739LMR _ 12 X 3/ 8 12 R-3/8 8.8 18 23.1 46.2

739LMR _ 12 X 1/2 12 R-1/2 8.8 22 23.1 52.0

739LMR _ 20 X 3 /4 20 R-3/4 15.1 27 26.6 54.3

TUBE (INCH) MALE PIPE

739LMR _ 1/8 X 1/8 1/8 3.17 R-1/8 .08 2.0 7/16 .53 13.45 1.16 29.5

739LMR _ 1/8 X 1/4 1/8 3.17 R-1/4 .08 2.0 9/16 .53 13.45 1.37 34.8

739LMR _ 1/4 X 1/8 1/4 6.35 R-1/8 .17 4.2 7/16 .62 15.75 1.25 31.8

739LMR _ 1/4 X 1/4 1/4 6.35 R-1/4 .17 4.2 9/16 .62 15.75 1.46 37.1

739LMR _ 1/4 X 3 /8 1/4 6.35 R-3/8 .17 4.2 11 /16 .62 15.75 1.49 37.9

739LMR _ 1/4 X 1/2 1/4 6.35 R-1/2 .17 4.2 7/8 .62 15.75 1.71 43.4

739LMR _ 3 /8 X 1/4 3/8 9.52 R-1/4 .27 6.9 9 /16 .69 17.50 1.53 38.9

739LMR _ 3 /8 X 3/8 3/8 9.52 R-3/8 .27 6.9 11/ 16 .69 17.50 1.56 39.6

739LMR _ 3 /8 X 1/2 3/8 9.52 R-1/2 .27 6.9 7/8 .69 17.50 1.78 45.2

739LMR _ 1/2 X 1/4 1/2 12.70 R-1/4 .28 7.1 9/16 .91 23.10 1.75 44.5

739LMR _ 1/2 X 3/8 1/2 12.70 R-3/8 .37 9.4 11/16 .91 23.10 1.78 45.2

739LMR _ 1/2 X 1/2 1/2 12.70 R-1/2 .37 9.4 7/8 .91 23.10 20.0 50.8

739LMR _ 5/8 X 1/2 5/8 15 .87 R-1/2 .47 11.9 7/ 8 .97 24.65 2.06 52.3

739LMR _ 3 /4 X 1/2 3/4 19.05 R-1/2 .47 11.9 7/8 .97 24.65 2.06 52.3

739LMR _ 3 /4 X 3/4 3/4 19.05 R-3/4 .59 15.0 1

739LMR _ 1 X 1 1 25.40 R-1 .80 20.3 1

Reference Specifications:

DIN -ISO 2999 BS - 21 JIS - B0203 ISO - 7/1-BSP-T

Designation: Marking LR on Hex

Ordering

Information

Ordering

Information

Tube O.D.

mm inch mm mm mm mm

Tube O.D.

inch mm inch inch mm inch inch mm inch mm

55° Thread angle

Truncation of root and crest is round

Taper angle 1°47’

(ISO)

D W

Hex. Flat

1/16 .97 24.65 2.06 52.3

3/8 1.30 33.00 2.60 66.0

N L

“D” - Dimension is minimum opening. Dimensions are for reference only, and are subject to change without notice.

COMPRESSION TUBE FITTINGS