Hamilton Buhl VP-35 User Manual
VP-35
Document Camera
USER MANUAL
Please read this manual carefully before operating the document camera and keep it for reference
1
PRECAUTIONS
NOTICES: PLEASE READ CAREFULLY BEFORE USE
u Use the document camera under the rated electric conditions.
u Do not place the document camera on any unstable surface. It may fall and cause injures
or damages.
u Do not place this device directly under sunlight or near heaters.
u Do not place this device near water.
u Keep the camera away from acid or alkali gas.
u Do not place this document camera in humid, dusty, windy or vibrant locations.
u The recommended operating environment is:
Temperature: 0ºC--45ºC(32ºF-113ºF)
Humidity: less than 75%
u Always unplug BEFORE cleaning the device. Use a damp soft-cloth for cleaning. Do not
use volatile solvent.
u When this equipment functions abnormally, such as smoke, smell, noise, immediately
unplug and call for professional assistance.
u Unplug the document camera or shut off the power when not in use.
2
CONTENTS:
1. PARTS IDENTIFICATION..............................................................5
2. CONTROL PANEL...........................................................................6
3. INPUTS AND OUTPUTS..................................................................7
4. REMOTE CONTROL.......................................................................8
5. CONNECTIONS................................................................................9
5.1. COMPUTER CONNECTION...........................................................................................9
5.2. USB CONNECTION.......................................................................................................10
5.3. RGB INPUT AND OUTPUT..........................................................................................10
5.4 DVI OUTPUT...................................................................................................................11
5.5. C-VIDEO & S-VIDEO INPUT.......................................................................................11
5.6. C-VIDEO & S-VIDEO OUTPUT...................................................................................12
6. RS232 SOFTWARE.........................................................................12
6.1 COMPUTER REQUIREMENTS.....................................................................................12
6.2. SOFTWARE INSTALLATION.......................................................................................12
6.3 SOFTWARE START AND SETTING.............................................................................15
6.4. BUTTON INSTRUCTION..............................................................................................17
7. USB FUNCTION.............................................................................19
7.1 USB-A..............................................................................................................................19
7.2 USB-B...............................................................................................................................19
7.2.1 COMPUTER REQUIREMENTS..........................................................................19
7.2.2 SOFTWARE INSTALLATION.............................................................................19
7.2.3 SOFTWARE START.............................................................................................24
7.2.4 IMAGE CONTROL...............................................................................................25
7.2.5 IMAGE CAPTURE AND VIDEO RECORDING................................................26
7.2.6 SETTING...............................................................................................................27
8. FEATURES......................................................................................28
LIGHT....................................................................................................................................28
ZOOM IN AND ZOOM OUT................................................................................................28
POSITIVE/NEGATIVE CONVERSION...............................................................................28
FOCUS ADJUSTMENT.........................................................................................................28
BRIGHTNESS ADJUSTMENT.............................................................................................29
WHITE BALANCE ADJUSTMENT.....................................................................................29
IMAGE FREEZE....................................................................................................................29
IMAGE ROTATE...................................................................................................................29
3
SPLIT SCREEN.....................................................................................................................29
TITLE FUNCTION................................................................................................................29
PICTURE IN PICTURE FUNCTION....................................................................................29
IMAGE SAVE........................................................................................................................29
IMAGE RECALL...................................................................................................................30
RGB INPUT SWITCH...........................................................................................................30
OUTPUT SWITCH................................................................................................................30
USB IMAGE CAPTURE AND VIDEO RECORDING.........................................................30
USB 2.0 PORT........................................................................................................................30
RS232 CONTROL..................................................................................................................30
9. SPECIFICATION............................................................................31
10. TROUBLE-SHOOTING:..............................................................32
11. PACKING LIST.............................................................................32
4
1. PARTS IDENTIFICATION
1. LED light box
2. Remote control IR receiver
3. Camera
4. Rear panel
5. Side panel-1
6. Side panel-2
7. Base light
8. Control panel
9. LCD screen
5
2. CONTROL PANEL
1. : Turn on/off the power.
2. MENU ENTER: Enter the control Menu.
3. HOME: Output the images that from the camera.
4. PC: Output the signal that from VGA input.
5. VIDEO: Output the signal that from the Video/S-Video input.
6. LAMP: Turn on/off the LED light.
7. AUTO: Carry out auto focus, color adjustment and white balance.
8. FOCUS: Adjust focus manually, focus far and focus near.
9. ZOOM: Image zoom in and zoom out control.
6
3. INPUTS AND OUTPUTS
1. DC 12V: Power input.
2. RS 232: Serial port, to control the document camera by computer via this port.
3. COMPUTER & AUDIO IN: Computer signal(and audio signal) input.
4. COMPUTER OUT: Output the signal that from the COMPUTER IN connector.
5. DVI OUT: DVI signal output.
6. AUDIO OUT: Audio output.
7. PROJECTOR OUT: Output the signal to projector or other display.
8. USB-A: Communicate with USB device, USB mouse, memory stick.
9. RGB & AUDIO IN: RGB signal(and audio signal) input(15 pin D-SUB).
10. USB-B: Capture image into a connected computer via provided software.
Download the saved image to computer.
11. C-VIDEO OUT: Composite video output.
12. S-VIDEO OUT: S-Video output.
13. VIDEO & AUDIO IN: Composite signal(and audio signal) input.
14. MIC: Microphone signal input.
15. S-VIDEO & AUDIO IN: S-Video signal(and audio signal) input.
7
4. REMOTE CONTROL
1. Save: Capture the image in display.
2. Recall: a. Image recall mode enabled, display the saved images.
b. When a memory stick was connected, press Recall to show the content that in the
memory stick
c. Back to upper lever in image recall mode.
3. Title: Enable the title function(title freezing).
4. Split: Split screen, enable the comparison between the frozen image and live image.
5. Neg: Switch the image mode between positive and negative.
6. Rotate: Rotate the image by 90o, 180o, 270o.
7. Freeze: Freeze/unfreeze the image.
8. PIP: Active the Picture in Picture function.
1>. Press Recall button, then use arrow button to select a saved image, press PIP to choose
it for PIP image.
2>. Press Recall to exit the image recall mode, press PIP again, then there will be a small
window on the lower right screen, showing the selected saved image.
9. Page +/-: Page up and page down in image recall mode.
10. Home: Output the images that from the camera.
11. Red+/-: Image chroma control (red).
8
12. SXGA/XGA: Switch the output signal between SXGA and XGA.
13. Blue+/-: Image chroma control (blue).
14. PC 1/2: Switch the input between PC1 and PC2.
15. Video 1/2: Switch the input between Video1 and Video2.
16. Menu Enter: a. Active the on screen menu.
b. Display the selected image in image recall mode.
17.Arrow buttons: move the cursor when the menu is activated.
18. USB: Switch the USB function between USB camera(capture the image that from camera to
PC and USB storage(download image from visualizer to PC).
19. Zoom+/-: Image zoom in and zoom out control.
20. Auto: Carry out auto focus, color adjustment and white balance.
21. Focus+/-: Adjust focus manually, focus far and focus near.
22. Bright+/-: Image brightness control.
5. CONNECTIONS
5.1. COMPUTER CONNECTION
9
5.2. USB CONNECTION
Side panel-1
USB
5.3. RGB INPUT AND OUTPUT
10
Loading...