Hamilton Beach Commercial HBH550 Parts Manual
Parts & Accessories Diagram
4421 Waterfront Drive
Glen Allen, VA 23060
Revision Description:
Replace Lid part number.
Request Number:
DOC7217
Revision Date:
11/10/2016
Approved by:
DOC7217
Issue Code(s):
Page:
1 of 3
Document #:
540044000
Rev:
C
Motor Seal
990060800
Lower Housing
990154910
Foot (1)
990036100
Drive Coupling
990060700
Motor, Complete
990151960
Jar Pad
990059900
Upper Housing Assembly
(with Badge and Control
Panel)
990151800
Control Panel
990151950
Hamilton Beach
Commercial Badge
990092700
Reset Switch
990114100
Knob Only
990070700
Timer Switch
with Knob
990151930
Control Board
990151920
Cordset
990060600
Motor Brush Set
(2 pcs)
990075300
Switch (1)
990151940
HBH550
PROPRIETARY RIGHTS NOTICE This document and all information contained within it is the property of Hamilton Beach Brands, Inc. (HBB). It is confidential and proprietary
and has been provided to you for a limited purpose. It must be returned or destroyed upon request. Disclosure, reproduction or use of this document and any information
contained within it, in full or in part, for any purpose is forbidden without the prior written consent of HBB. No photographs may be taken of any article fabricated or assembled
from this document without the prior written consent of HBB.
REPLACEMENT PARTS:
ENG-FRM-RIC-4.32, Rev. E
Parts & Accessories Diagram
4421 Waterfront Drive
Glen Allen, VA 23060
Revision Description:
Replace Lid part number.
Request Number:
DOC7217
Revision Date:
11/10/2016
Approved by:
DOC7217
Issue Code(s):
Page:
2 of 3
Document #:
540044000
Rev:
C
Filler Cap
990084000
Lid
990105800
64oz. Container,
Complete
6126-650
6126-650-OP
Cutter Assembly **
98650
Container, Magnetic
990075400
HBH550
PROPRIETARY RIGHTS NOTICE This document and all information contained within it is the property of Hamilton Beach Brands, Inc. (HBB). It is confidential and proprietary
and has been provided to you for a limited purpose. It must be returned or destroyed upon request. Disclosure, reproduction or use of this document and any information
contained within it, in full or in part, for any purpose is forbidden without the prior written consent of HBB. No photographs may be taken of any article fabricated or assembled
from this document without the prior written consent of HBB.
**Cutter Assembly Includes: Blade, Lock Washer, Hex Nut, Drive Coupling Attachment and Cutter Bearing
Assembly.
ENG-FRM-RIC-4.32, Rev. E
Loading...