Hamilton Beach Commercial HBF500 SERVICE MANUAL
840208901
11/11
Find Recipes and Demo Videos at
www.commercial.hamiltonbeach.com
Mélangeur pou
aliments
Manuel d’utilisation
Page 9
Food Blender
Operation Manual
Page 2
Licuadora para
Alimentos
Manual de Uso
Página 16
READ BEFORE USE.
LIRE AVANT D’UTILISER.
LEA ANTES DE USAR.
Blender Safety
IMPORTANT: This operation manual should be reviewed with all equipment operators as part of your
operator training program.
1. Read the Operation Manual before using blender.
Keep Operation Manual handy.
2. Plug into a grounded 3-prong outlet.
3. Do not remove ground prong.
4. Do not use an adapter.
5. Do not use an extension cord.
6. Disconnect power before cleaning or servicing.
7. To reduce risk of personal injury, unplug cord from
outlet when not in use, and before putting on or
taking off parts.
8. To protect against electrical shock, do not immerse
cord, plug, or blender base in water or any other
liquid.
9. Do not spray the base with a high-pressure spray gun.
10. Extreme caution must be used when moving an
appliance containing hot oil or other hot liquids.
11. Do not use appliance for other than intended use.
12. Not intended for use by or near children.
13. The appliance is not intended for use by persons
(including children) with reduced physical, sensory, or
mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
14. Children should be supervised to ensure that they do
not play with the appliance.
15. The use of accessory attachments not recommended
by the appliance manufacturer may cause injuries.
16. To reduce risk of personal injury and to prevent
damage to blender or container and cutter assembly,
DO NOT insert utensils into blender container while
operating blender.
17. Do not store any kitchen utensils in the container
because the blender would be damaged if
inadvertently turned on.
– SAVE THESE IN STRUC TIONS –
18. To prevent possibility of serious personal injury, keep
hands out of blender container while operating blender.
Always operate blender with container lid in place.
19. Avoid contacting moving parts.
20. Blades are sharp. Handle carefully.
21. If cutter assembly blades are loose, discontinue use
immediately and replace cutter assembly. Do not
attempt to repair or tighten cutter assembly.
22. Inspect container and cutter assembly daily. Do not
use broken, chipped or cracked container. Check
cutter for wear, nicks, or broken blades. Do not use
broken or cracked cutting blades.
23. Do not use outdoors.
24. This appliance is intended for short periods of
operation, with a rated operating time of 3 minutes.
25. Do not leave blender unattended while it is operating.
26. To prevent damage to blender, container, or cutter
assembly, DO NOT move or shake blender while in
operation.
27. When blending hot liquids, remove center-piece of
two-piece lid. Hot liquids may push lid off container
during blending. To prevent possible burns: Do not fill
blender container beyond the 32 oz. (1 liter) level. With
the protection of an oven mitt or thick towel, place one
hand on top of lid. Keep exposed skin away from lid.
Start blending at lowest speed.
28. Always operate blender with container lid in place.
29. Do not operate any appliance with a damaged cord or
plug or after the appliance malfunctions, or is dropped
or damaged in any manner. Call the Technical Services
number, 866-285-1087 or 910-693-4277, for
instructions on examination, repair, or electrical
or mechanical adjustment.
IMPORTANT SAFETY INSTRUCTIONS
WARNING – When using electrical appliances, basic safety precautions should be followed,
including the following:
2
Cut Hazard
Always place lid on container when
blending.
Do not put hands, spoons, or other
utensils in container when blending.
Failure to follow these instructions can
result in broken bones, cuts, or other
injuries.
Burn Hazard
Always use caution when blending
hot contents.
Failure to follow these instructions can
result in burns.
Sanitize using 1 tablespoon (15 ml) of household
bleach per 1 gallon (3.8 liter) of clean, cool water
(60°F/16°C), mixed according to the instructions
on the bleach.
1. Fill container with sanitizing solution, replace lid
and filler cap and run on LOW (speed 2) for
2 minutes. Empty container.
2. Wipe exterior with soft cloth dampened with
sanitizing solution.
3. Immerse lid and filler cap in sanitizing solution for
2 minutes.
4. Place empty container on base and run on HIGH
(speed 10) for 2 seconds to remove any moisture
from the cutter assembly.
5. When ready to use, rinse with clean water.
Sanitizing
Electrical Shock Hazard
Disconnect power before
cleaning blender base.
Failure to follow these
instructions can result in
death or electrical shock.
Electrical Shock Hazard
Plug into a grounded outlet.
Do not remove ground.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can
result in death, fire, or electrical shock.
3
Blender Safety
22
24
26
For assistance or replacement parts, call our
Technical Services number:
1-866-285-1087 (USA, Canada)
or 910-693-4277 (all others)
8 a.m. – 5 p.m. EST Monday – Friday
www.commercial.hamiltonbeach.com
Technical Services
The parts and features for the blender are shown on this page. Become familiar with all parts and features
before using your blender.
Your blender is designed for blending and mixing foods such as sauces and soups.
Lid
64-oz. (1.9 L)
Stainless Steel
Container
(Model HBF500S)
Dosing Cup
Control
Panel
Blender
Base
Cutter Assembly
Jar Pad
Power/Reset
Switch
Parts and Features
4
48-oz. (1.4 L)
Polycarbonate Jar
(Model HBF500)
Blender Operation – Quick Start Guide
1. Read Important Safety Instructions and Warnings
before use.
2. Place the blender on a dry, level surface.
3. Make sure the Power/Reset switch is set to
OFF (O), and the Standby/ON (I) switch is set
to STOP . Plug the blender into a grounded
3-prong electrical outlet.
4. Place the container on the base with ingredients
and container lid in place.
5. Turn the Power/Reset switch on the rear of the
base to the RESET position.
6. Adjust the variable speed knob to desired speed.
7. Set the Standby/ON (I) switch to START or
use PULSE .
Control Panel
5
Power Requirements
Use a fused electric outlet for the blender. Depending on the model of your blender, the plug will look like
the following to meet power requirements:
Variable Speed Knob
Stop
Standby/ON (I)
Start
Chop
Variable
Pulse
120 VAC, 60 Hz
Ground
prong
6
Problem . . . Solution . . .
Ingredients will not
mix properly.
• Check to see if enough liquid has been added to the ingredients. Mixture should
be fluid and free-running at all times.
• Solid pieces are too large.
• Container is too full. Do not fill past highest graduation marking.
• Cutter assembly blades are not sharp or are damaged. Inspect container and
cutter assembly daily. Replace cutter assembly at least yearly or sooner if cutter
assembly appears worn or damaged.
• Check to see if cutter assembly is installed properly.
• Select speed to create a fluid blend.
Troubleshooting Guide
Blender fails to start
or stops while it is
running.
• Check to see if unit is securely plugged into an electric outlet of the proper
voltage and frequency.
• Check to see if the fuse for the electric outlet has blown or if a circuit breaker
has tripped.
• Check the integrated circuit breaker on the bottom of the blender base. If it trips
again immediately or frequently, contact Technical Services.
• Thermal overload protection has been tripped. Allow unit to cool.
• The motor is overheating. Try mixing smaller batches or running for shorter cycle
times. Allow motor to cool between batches.
Unplug the blender and remove the container from the base, and then inspect the
container and cutter assembly for wear, nicks, and broken or loose blades. Replace if
necessary. If the blades are loose, discontinue use immediately and replace the blades.
Do not attempt to repair or tighten the cutter assembly. See page 25 for details.
Unplug the blender, and then inspect the power cord insulation and power plug for
cracks. Refer to “Technical Services” for repair or replacement. Remove container from
blender base. Inspect the cutter assembly by rotating the drive end of the cutter assembly
by hand. It should turn smoothly. If it does not, replace the cutter assembly. See page 25
for details.
Inspect the blender and its various parts and replace as follows:
Daily
Weekly
Maintenance
Notes
7
Product Warranty
This Warranty supercedes all other Product Warranties
LIMITED WARRANTY
This warranty applies to products purchased in the U.S. and Canada. This is the only express warranty for this product
and is in lieu of any other warranty or condition.
This product is warranted to be free from defects in material and workmanship for a period of one (1) year from the date
of original purchase.
If you have a claim under this warranty please contact our TECHNICAL SERVICES DEPARTMENT at 1-866-285-1087
or 910-693-4277. For faster service, locate the model, type, and series numbers on your appliance.
This warranty does not cover glass, filters, wear from normal use, use not in conformity with the printed directions, or
damage to the product resulting from accident, alteration, abuse, or misuse. This warranty extends only to the original
purchaser. Keep the original sales receipt, as proof of purchase is required to make a warranty claim or the warranty
term will be based on the date of manufacture plus one (1) year.
We exclude all claims for special, incidental, and consequential damages caused by breach of express or implied
warranty. All liability is limited to the amount of the purchase price. Every implied warranty, including any statutory
warranty or condition of merchantability or fitness for a particular purpose, is disclaimed except to the extent
prohibited by law, in which case such warranty or condition is limited to the duration of this written warranty.
This warranty gives you specific legal rights. You may have other legal rights that vary depending on where you live.
Some states or provinces do not allow limitations on implied warranties or special, incidental, or consequential
damages, so the foregoing limitations may not apply to you.
8
Hamilton Beach Commercial understands that your foodservice equipment is a crucial element in the
profitability of your business. If your equipment breaks down, you would like repair thatʼs quick, convenient,
and dependable. Thatʼs why we provide the Express Care Service Program for this product while itʼs under
the Product Warranty. Youʼll find that itʼs better for your bottom line and your peace of mind.
Follow these three easy steps for quick, convenient, and dependable ECSP repairs:
Step One: Dial 1-866-285-1087 toll-free to speak to a member of our highly trained technical service
staff (hours Monday – Friday 8:00 AM – 5:00 PM EST). We will make an initial phone diagnosis.
Step Two. If it is determined that minimal on-site maintenance cannot be performed, Hamilton Beach
Commercial will ship a replacement product to your location.
Step Three: Once the replacement unit is received, you send the troubled unit back to Hamilton Beach
Commercial (weʼll provide the box and supporting materials to return the unit). Hamilton Beach
Commercial will pay the freight cost for the returned unit.
NOTE: The warranty of the replacement unit will be prorated based on the time period remaining on the
replaced unit.
Two-Year Express Care Service Program*
*Available only to end users located in the continental U.S., Alaska, and Hawaii
9
Sécurité du mélangeur
IMPORTANT : Tous les utilisateurs de cet appareil doivent étudier ce manuel d’utilisation dans le cadre
de leur programme de formation des utilisateurs.
1. Lisez le Manuel d’utilisation avant d’utiliser votre
mélangeur. Conservez le Manuel d’utilisation à
portée de votre main.
2. Branchez votre appareil dans une prise à 3 broches
bien mise à la terre.
3. N’enlevez jamais la broche de mise à la terre.
4. N’utilisez jamais un adaptateur.
5. N’utilisez jamais une rallonge.
6. Débranchez l’électricité avant de nettoyer ou de
réparer votre appareil.
7. Pour réduire le danger de blessure personnelle,
débranchez le cordon de la prise électrique quand
votre appareil n’est pas en fonctionnement, et avant
d’y mettre ou d’en retirer des pièces.
8. Pour vous protéger contre une électrocution,
n’immergez jamais le cordon, la fiche ou la base du
mélangeur dans de l’eau ou dans tout autre liquide.
9. Ne pulvérisez jamais la base à l’aide d’un pistolet à
pulvérisation à haute pression.
10. Vous devez faire extrêmement attention quand vous
déplacez un appareil électroménager qui contient de
l’huile chaude ou tout autre liquide chaud.
11. N’utilisez jamais cet appareil à des fins autres que
celles auxquelles il est destiné.
12. Cet appareil ne devrait jamais être utilisé par des
enfants ou à proximité d’enfants.
13. L’utilisation de cet appareil n’est pas prévu pour les
porteurs d’handicaps (y compris les enfants) de type
physique, sensoriel ou mental, ou pour les personnes
sans expérience ni connaissance, à moins qu’elles
aient été convenablement formées ou contrôlées par
une personne responsable de leur sécurité.
14. Surveillez que les enfants ne jouent pas avec
l’appareil.
15. L’utilisation d’accessoires non recommandés par le
fabricant pourrait provoquer des blessures.
16. Pour réduire le danger de blessure personnelle et pour
empêcher tout dommage au mélangeur ou au
récipient et à l’ensemble de couteaux, N’INSEREZ
JAMAIS d’ustensile de cuisine dans le récipient du
mélangeur quand vous faites fonctionner le mélangeur.
17. Ne rangez aucun ustensile de cuisine dans le
récipient, parce que le mélangeur pourrait être
endommagé s’il est mis en marche par accident.
– CONSERVEZ CES INSTRUCTIONS –
18. Pour empêcher la possibilité de blessures personnelles
sérieuses, ne mettez jamais vos mains dans le
récipient du mélangeur quand vous faites fonctionner
le mélangeur. Faites toujours marcher le mélangeur
avec le couvercle du récipient en place.
19. Évitez de toucher des pièces en mouvement.
20. Les lames sont aiguisées. Manipulez-les avec soins.
21. Si les lames du mécanisme de coupe sont lâches,
arrêtez-vous immédiatement d’utiliser votre appareil et
remplacez le mécanisme de coupe. N’essayez jamais
de réparer ou de resserrer le mécanisme de coupe.
22. Inspectez le récipient et le mécanisme de coupe
chaque jour. N’utilisez jamais un récipient cassé,
ébréché ou fendu. N’utilisez jamais de lames cassées
ou ébréchées.
23. N’utilisez jamais votre appareil à l’extérieur.
24. Cet appareil doit être utilisé pendant des périodes
courtes, avec une durée d’opération normale de
3 minutes.
25. Ne laissez jamais votre mélangeur en fonctionnement
sans surveillance.
26. Pour éviter tout dommage à votre mélangeur, à votre
récipient ou à votre mécanisme de coupe. NE bougez
JAMAIS ou ne remuez jamais votre mélangeur en
fonctionnement.
27. Quand vous mélangez des liquides chauds, enlevez
la pièce centrale du couvercle en deux pièces. Les
liquides chauds peuvent pousser le couvercle en
dehors du récipient pendant le fonctionnement de
l’appareil. Pour éviter tout danger de brûlure : ne
mettez jamais plus d’un litre (1 quart) de liquide dans
le récipient. En vous protégeant par un gant de cuisine
ou un torchon épais, placez une main en haut du
couvercle. Tenez éloignées du couvercle les parties
du corps dont la peau est exposée. Commencez à
mélanger à la vitesse la plus basse.
28. Faites toujours fonctionner votre mélangeur avec le
couvercle du récipient en place.
29. Ne faites fonctionner aucun appareil électroménager
qui a une fiche ou un cordon endommagé de quelque
manière que ce soit. Appelez le Service technique au
866-285-1087 ou 910-693-4277 pour recevoir des
instructions ou pour examiner, réparer ou ajuster
électriquement ou mécaniquement votre appareil.
INSTRUCTIONS IMPORTANTES DE SÉCURITÉ
AVERTISSEMENT – Quand vous utilisez des appareils électriques, vous devez suivre des
précautions de sécurité de base, en particulier les suivantes :
Loading...