Hamilton Beach Commercial HBB250SR Parts Manual
Parts and Accessories Diagram
4421 Waterfront Drive
Glen Allen, VA 23060
Revision Description:
Add new parts
Request Number:
Revision Date:
7/18/14
Approved by:
DOC4996
Issue Code(s):
L
Page:
1 of 5
Document #:
540023000
Rev:
B
Upper Housing
990084300
Motor
990058800
Power Cord
990036900
Switch
On/Off/Pulse
990037900
Speed Switch
(Includes Diode)
990036500
Hamilton Beach
Commercial Badge
990092700
Foot (1)
990036100
Lower Housing
990036800
Brush Motor Kit
(Not Shown)
990075100
Clutch
990036300
PROPRIETARY RIGHTS NOTICE This document and all information contained within it is the property of Hamilton Beach Brands, Inc. (HBB). It is confidential and proprietary
and has been provided to you for a limited purpose. It must be returned or destroyed upon request. Disclosure, reproduction or use of this document and any information
contained within it, in full or in part, for any purpose is forbidden without the prior written consent of HBB. No photographs may be taken of any article fabricated or assembled
from this document without the prior written consent of HBB.
Model HBB250SR
Replacement Parts
ENG-FRM-RIC-4.32, Rev. E
Parts and Accessories Diagram
4421 Waterfront Drive
Glen Allen, VA 23060
Revision Description:
Add new parts
Request Number:
Revision Date:
7/18/14
Approved by:
DOC4996
Issue Code(s):
L
Page:
2 of 5
Document #:
540023000
Rev:
B
Container,
Complete (32 Oz.)
6126-250S
Cover, Container
990037300
Fill Cap
990036000
Container, Base
990037400
Support Ring
990087900
Gasket, Container
990080400
Cutter Assembly
98250
Container
Stainless Steel
990037500
V-Seal 990192100
Cutter Shaft Assy. 990192200
Bushing/Bearing Assy. 990192300
Fiber Washer 990192400 (Recommend
replacement if replacing clutch also)
Clutch 990036300
These parts may be ordered individually (all
included in Cutter Assy. 98250)
PROPRIETARY RIGHTS NOTICE This document and all information contained within it is the property of Hamilton Beach Brands, Inc. (HBB). It is confidential and proprietary
and has been provided to you for a limited purpose. It must be returned or destroyed upon request. Disclosure, reproduction or use of this document and any information
contained within it, in full or in part, for any purpose is forbidden without the prior written consent of HBB. No photographs may be taken of any article fabricated or assembled
from this document without the prior written consent of HBB.
Model HBB250SR
ENG-FRM-RIC-4.32, Rev. E
Loading...