Hamilton Beach Commercial HBB250S-CE Parts Manual
Parts and Accessories Diagram
4421 Waterfront Drive
Glen Allen, VA 23060
Revision Description:
Added new parts
Request Number:
Revision Date:
7/18/14
Approved by:
DOC4996
Issue Code(s):
L
Page:
1 of 3
Document #:
540006000
Rev:
C
Upper Housing
990153100
Motor
990054300
Cord Socket
990064800
Jar Sensor
990084400
RFI Board
990064600
Switch
On/Off/Pulse
990037900
Speed Switch
(with diode)
990036500
Hamilton Beach
Commercial Badge
990092700
Foot (1 ea.)
990036100
Lower Housing
990153110
Brush Motor Kit
(Not Shown)
990075100
Power Cord
990054200
Clutch
990036300
PROPRIETARY RIGHTS NOTICE This document and all information contained within it is the property of Hamilton Beach Brands, Inc. (HBB). It is confidential and proprietary
and has been provided to you for a limited purpose. It must be returned or destroyed upon request. Disclosure, reproduction or use of this document and any information
contained within it, in full or in part, for any purpose is forbidden without the prior written consent of HBB. No photographs may be taken of any article fabricated or assembled
from this document without the prior written consent of HBB.
Model HBB250S-CE
Replacement Parts
ENG-FRM-RIC-4.32, Rev. E
PROPRIETARY RIGHTS NOTICE This document and all information contained within it is the property of Hamilton Beach Brands, Inc. (HBB). It is confidential and proprietary
4421 Waterfront Drive
Glen Allen, VA 23060
Revision Description:
Added new parts
Request Number:
Revision Date:
7/18/14
Approved by:
DOC4996
Issue Code(s):
L
Page:
2 of 3
Document #:
540006000
Rev:
C
Container,
Complete (32 Oz.)
6126-250S-CE
Cover, Container
990037300
Fill Cap
990036000
Magnetic Container,
Base
990080500
Support Ring
990087900
Gasket, Container
990080400
Cutter Assembly
98250
Container
Stainless Steel
990037500
V-Seal 990192100
Cutter Shaft Assy. 990192200
Bushing/Bearing Assy. 990192300
Fiber Washer 990192400 (Recommend
replacement if replacing clutch also)
Clutch 990036300
These parts may be ordered individually (all
included in Cutter Assy. 98250)
and has been provided to you for a limited purpose. It must be returned or destroyed upon request. Disclosure, reproduction or use of this document and any information
contained within it, in full or in part, for any purpose is forbidden without the prior written consent of HBB. No photographs may be taken of any article fabricated or assembled
from this document without the prior written consent of HBB.
ENG-FRM-RIC-4.32, Rev. E
Parts and Accessories Diagram
Model HBB250S-CE
Loading...