Hamilton Beach Tempest User Manual [en, es, fr]
840065601
Tempest
Series Blenders
Operation Manual
Technical Service: 1-866-285-1087 (www.commercial.hamiltonbeach.com)
Mélangeurs de series
Tempest
Manuel d’utilisation
Licuadoras de series
Tempest
Manual de uso
wWARNING
Electrical Shock Hazard
Plug into a grounded outlet.
Do not remove ground.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result
in death, fire, or electrical shock.
2
Blender Safety
You will
be killed or seriously injured if
you don’t follow instructions.
You can be killed or seriously injured if
you don’t follow instructions.
Your safety and the safety of others is very important.
We have provided many important safety messages in this manual and on your appliance.
Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to hazards that can kill or hurt you and others.
All safety messages will be preceded by the safety alert symbol and the word “DANGER” or
“WARNING.” These words mean:
All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you what
can happen if the instructions are not followed.
wDANGER
wWARNING
IMPORTANT: This operation manual should be reviewed with all equipment operators as part of your
operator training program.
wWARNING
Cut Hazard
Always place cover on jar when blending.
Do not put hands, spoons, or other utensils in
jar when blending.
Failure to follow these instructions can result
in broken bones or cuts.
Call our Technical Service number: 866-285-1087 or 910-692-2223
8 a.m. – 5:30 p.m. EST Monday – Thursday, 8 a.m. – 5:15 p.m. EST Friday
(www.commercial.hamiltonbeach.com)
Requesting Assistance or Service
Before calling for assistance or service, please check
the “Troubleshooting Guide” in this manual. If you still
need help, follow the instructions below.
Whenever you call to request assistance or service,
you need to know the complete model number. You
can find this information on the label on the bottom of
your blender.
Please also record the purchase date of your
equipment and your dealer’s name, address,
and telephone number.
Model Number__________________________
Purchase Date__________________________
Dealer Name ___________________________
Dealer Address _________________________
Dealer Phone___________________________
You can also order replacement parts by calling your
nearest Hamilton Beach Commercial Service Center or
your local dealer.
3
Blender Safety
• Read all instructions.
• Plug into a grounded outlet.
• Do not touch surfaces that may be hot.
Use handles or knobs provided.
• Extreme caution must be used when moving an
appliance containing hot oil or other hot liquids.
• Do not use appliance for other than intended use.
• To protect against electrical shock, do not
immerse cord, plug, or blender base in water
or any other liquid.
• Close supervision is necessary when any
appliance is used by or near children.
• The use of accessory attachments not recommended by Hamilton Beach may cause injuries.
• To reduce risk of personal injury, unplug cord
from outlet when not in use, and before putting on
or taking off parts or doing any other servicing of
the blender.
• Do not let cord hang over edge of table or
counter or touch hot surfaces.
• Do not place on or near a hot gas or electric
burner or in a heated oven.
• To reduce risk of personal injury and to prevent
damage to blender or jar and cutter assembly,
DO NOT insert utensils into blender jar while
operating blender, or store utensils in the blender
jar when it is not in use.
• Avoid contacting moving parts.
• Blades are sharp. Handle carefully.
• Inspect jar and cutter assembly daily. Check
cutter for wear, nicks, or broken blades. Replace
jar and cutter assembly at least every 12 months.
• Do not defeat the jar pad sensors.
• Do not use outdoors.
• This appliance is intended for short periods
of operation, with a rated operating time of
3 minutes.
– SAVE THESE INSTRUCTIONS –
• To prevent damage to blender, jar, or cutter
assembly, DO NOT move or shake blender
while in operation. If blending action stops during
operation, turn blender OFF, remove jar from
base, remove jar cover, and use a thin rubber
spatula to push mixture towards cutters.
• Do not spray the base with a high-pressure
spray gun.
• Disconnect power before cleaning or servicing.
• To prevent burns from hot liquids splashing out
of the jar, always remove the filler cap of the
container cover before blending hot liquids.
• Do not operate any appliance with a damaged
cord or plug or after the appliance malfunctions,
or is dropped or damaged in any manner.
Return appliance to the nearest service facility
for examination, repair, or electrical or
mechanical adjustment.
• If the supply cord of this appliance is damaged,
it must be replaced by the manufacturer or its
service agent or a similar qualified person. If fitted
with a non-rewirable U.K. plug, the 13 amp fuse
approved by ASTA to be B.S. 1362 must be used.
If you need a replacement fuse carrier, it must be
replaced by the same colour coded carrier with
the same markings. Fuse covers and carriers
can be obtained from approved service agents.
IMPORTANT: If the molded plug is cut off,
dispose of it immediately. The plug is not rewirable
and would cause a shock hazard if inserted into
a socket.
• For a complete operation manual in this
language, please visit our website at
www.commercial.hamiltonbeach.com
or call 910-692-2223.
IMPORTANT SAFETY INSTRUCTIONS
WARNING – When using electrical appliances, basic safety precautions should be followed, including
the following:
Blender Operation – Quick Start Guide
1. Place the blender on a dry, level surface.
2. Make sure the power switch is in the “off” or O
position. Plug the blender into a grounded electrical
outlet.
3. Place the jar on the base with ingredients and jar
lid in place.
4. Set the controls to your preference.
5. Move the power switch to the “on” or I position
(except model 915).
6. Move the power switch to start (run) or
position.
Caring for the Blender
Cleaning the Blender
Cleaning
The jar should be cleaned immediately AFTER
EACH USE. The jar can be cleaned in the
following manner:
1. Fill the jar half full with warm water,
122 degrees F (50 degrees C).
2. Add a drop of liquid detergent or 1⁄2 teaspoon of
detergent powder.
3. Place the cover/filler cap on the jar and blend on
C cycle or the High setting for 30 seconds.
4. Turn the blender off, and then rinse the jar
and wipe down to dry. Do not disassemble
the cutter assembly.
5. Wash the jar cover/filler cap in warm, soapy
water. Rinse and let dry.
6. Unplug the blender.
7. Wipe down the blender base with a damp cloth.
wWARNING
Electrical Shock Hazard
Plug into a grounded outlet.
Do not remove ground.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can
result in death, fire, or electrical shock.
wWARNING
Cut Hazard
Always place cover on jar when blending.
Do not put hands, spoons, or other utensils
in jar when blending.
Failure to follow these instructions can
result in broken bones or cuts.
Sanitizing
If the blender will not be used again within 1 hour,
sanitize the container in the following manner:
1. After washing the jar, fill it with a cold chlorinebased sanitizing solution that has a minimum
chlorine concentration of 100 parts per million.
See recommended solution below.
2. Place the cover/filler cap on the jar and blend on
C cycle or the High setting for a minimum of 2
minutes.
3. Empty the jar but do not rinse.
4. Dry the jar by placing it on the blender base and
turn the blender on C (Slide-step cycle) or the
High setting for 2 seconds.
Recommended Sanitizing Solution:
The sanitizing solution should consist of 1
tablespoon of household bleach per 1 gallon of
clean, cool water (60° F, 16° C) mixed according
to the instructions on the bleach. When using a
sanitizing solution other than that recommended,
the sanitizing solution concentration should be
tested using commercially available test strips
and should indicate a concentration between
100 and 200 parts per million of bleach to water.
4
Troubleshooting Guide
Problem . . . Solution . . .
Operation/Status light
lights red
(on some models)
A system fault has been detected. Unplug unit for 5 seconds, and then plug unit
back in. If light is still red, unplug unit for 6 minutes, and then plug unit back in.
If light is still red, refer to "Requesting Assistance or Service.”
If Operation/Status light repeatedly lights red, refer to “Requesting Assistance
or Service.”
Unit will not run
• Check to see if unit is securely plugged into an electric outlet.
• Check to see if operation light is illuminated when blender is On.
• Check to see if the fuse for the electric outlet has blown or if a circuit breaker
has tripped.
• Jar is not securely seated on the base.
Ingredients will not mix
properly
• Check to see if enough liquid has been added to the ingredients. Mixture should
be fluid and free-running at all times.
• Solid pieces are too large. Pieces should not exceed 1″ cubes.
• Jar is too full. Do not fill past highest graduation marking.
• Cutters are not sharp or are damaged. Inspect jar and cutter assembly daily.
Replace jar and cutter assembly at least every 12 months or when damaged.
Operation/Status light
lights yellow
(on some models)
• Jar is not on blender base.
• Jar is not securely seated on optional jar pad sensors.
Caring for the Blender
Replacement Parts
Maintenance
Unplug the blender and remove the jar from the base, and then inspect the jar and cutter assembly
for wear, nicks, or broken blades. Replace if necessary. See “Replacement Parts” below.
Unplug the blender, and then inspect the power cord insulation and power plug for cracks. Refer to
“Requesting Assistance or Service” for repair or replacement.
Replace the jar and cutter assembly at least once a year. See “Replacement Parts” below.
32 oz. Polycarbonate jar and cutter assembly (includes cover/filler cap)
Description . . . Part Number . . .
6126-91515
Inspect the blender and its various parts and replace as follows:
Daily
Weekly
Yearly
Refer to “Requesting Assistance or Service” on page 2 to order parts below.
NOTE: Do not operate this blender if it malfunctions or is dropped or damaged in any manner. Return blender to
the nearest authorized service facility for examination, repair, or electrical or mechanical adjustment.
5
Loading...