Hamilton Beach Tango User Manual

840083701-UK

www.commercial.hamiltonbeach.com

Tango Series

Bar blenders

Operation Manual

wWARNING

Electrical Shock Hazard

Plug into a grounded outlet. Do not remove ground. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result

in death, fire, or electrical shock.

Blender Safety

You will be killed or seriously injured if you don’t follow instructions.

You can be killed or seriously injured if you don’t follow instructions.

Your safety and the safety of others is very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol. This symbol alerts you to hazards that can kill or hurt you and others. All safety messages will be preceded by the safety alert symbol and the word “DANGER” or

“WARNING.” These words mean:

All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

wDANGER

wWARNING

IMPORTANT: This operation manual should be reviewed with all equipment operators as part of your operator training program.

wWARNING

Cut Hazard

Always place cover on jar when blending. Do not put hands, spoons or other utensils in

jar when blending. Failure to follow these instructions can result

in broken bones or cuts.

Call our Technical Service number: 866-285-1087 or 910-693-4277

8 a.m. – 5 p.m. EST Monday – Friday

(www.commercial.hamiltonbeach.com)

Requesting Assistance or Service

Before calling for assistance or service, please check the “Troubleshooting Guide” in this manual. If you still need help, follow the instructions below.

Whenever you call to request assistance or service, you need to know the complete model number. You can find this information on the label on the bottom of your blender.

Please also record the purchase date of your equipment and your dealer’s name, address, and telephone number.

Model Number__________________________ Purchase Date _________________________ Dealer Name ___________________________ Dealer Address _________________________ Dealer Phone___________________________

You can also order replacement parts by calling your nearest Hamilton Beach Commercial Service Center or your local dealer.

Blender Safety

• Read all instructions.

• Plug into a grounded outlet.

• Do not touch surfaces that may be hot.

Use handles or knobs provided.

• Extreme caution must be used when moving an

appliance containing hot oil or other hot liquids.

• Do not use appliance for other than intended use.

• To protect against electrical shock, do not

immerse cord, plug, or blender base in water or any other liquid.

• Close supervision is necessary when any

appliance is used by or near children.

• The use of accessory attachments not

recommended by Hamilton Beach may cause injuries.

• To reduce risk of personal injury, unplug cord

from outlet when not in use, and before putting on or taking off parts or doing any other servicing of the blender.

• Do not let cord hang over edge of table or

counter or touch hot surfaces.

• Do not place on or near a hot gas or electric

burner or in a heated oven.

• To reduce risk of personal injury and to prevent

damage to blender or jar and cutter assembly, DO NOT insert utensils into blender jar while operating blender, or store utensils in the blender jar when it is not in use.

• Avoid contacting moving parts.

• Blades are sharp. Handle carefully.

• Inspect jar and cutter assembly daily. Check

cutter for wear, nicks, or broken blades. Replace jar and cutter assembly at least every 12 months.

• Do not defeat the jar pad sensors.

– SAVE THESE INSTRUCTIONS –

• Do not use outdoors.

• This appliance is intended for short periods

of operation, with a rated operating time of 3 minutes.

• To prevent damage to blender, jar, or cutter

assembly, DO NOT move or shake blender while in operation. If blending action stops during operation, turn blender OFF, remove jar from base, remove jar cover, and use a thin rubber spatula to push mixture towards cutters.

• Do not spray the base with a high-pressure

spray gun.

• Disconnect power before cleaning or servicing.

• To prevent burns from hot liquids splashing out of

the jar, always remove the filler cap of the container cover before blending hot liquids.

• Do not operate any appliance with a damaged

cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest service facility for examination, repair, or electrical or mechanical adjustment.

• If the supply cord of this appliance is damaged,

it must be replaced by the manufacturer or its service agent or a similar qualified person. If fitted with a non-rewirable U.K. plug, the 13 amp fuse approved by ASTA to be B.S. 1362 must be used. If you need a replacement fuse carrier, it must be replaced by the same colour coded carrier with the same markings. Fuse covers and carriers can be obtained from approved service agents. IMPORTANT: If the molded plug is cut off, dispose of it immediately. The plug is not rewirable and would cause a shock hazard if inserted into a socket.

IMPORTANT SAFETY INSTRUCTIONS

WARNING – When using electrical appliances, basic safety precautions should be followed, including

the following:

Blender Operation – Quick Start Guide

1. Place the blender on a dry, level surface.

2. Make sure the power switch is in the “off” or O

position. Plug the blender into a grounded electrical outlet.

3. Place the jar on the base with ingredients and jar lid in place.

4. Set the controls to your preference.

5. Move the power switch to the “on” or I position.

+ 5 hidden pages