Hamilton Beach Sure Cut User Manual

Sure Cut™Can Opener

Ouvre-boîtes Sure Cut

™

840098300

English ..............................2

USA: 1-800-851-8900

Français ............................7

Canada : 1-800-267-2826

Digitally signed by A. Creery cn=A. Creery, c=US Date: 2002.02.14 11:32:53 -05'00' Reason: I am approving this document

4.25X5.5"; 12 pg.; English/French; black ink; no bleed; map.

840098300 ENv01.qxd 2/14/02 8:38 AM Page 1

IMPORTANT SAFEGUARDS

SAVE THESE INSTRUCTIONS

When using electrical appliances, basic safety precautions should always be followed, including the following:

1. Read all instructions.

2. To protect against risk of electrical shock, do not put can opener

body, cord, or plug in water or other liquid.

3. Close supervision is necessary when any appliance is used by or near children.

4. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.

5. Avoid contacting moving parts.

6. Do not operate any appliance with a damaged cord or plug, or

after the appliance malfunctions or is dropped or damaged in any manner. Call our toll-free customer service number for information on examination, repair, or electrical or mechanical adjustment.

7. The use of attachments not recommended or sold by Hamilton Beach/Proctor-Silex, Inc. may cause fire, electric shock, or injury.

8. Do not use outdoors.

9. Do not let cord hang over edge of table or counter, or touch

hot surfaces.

10. Do not place on or near a hot gas or electric burner, or in a heated oven.

11. Do not open pressurized (aerosol-type) cans.

12. Do not open cans of flammable liquids such as lighter fluid.

13. Do not use appliance for other than intended use.

CONSUMER SAFETY INFORMATION

This appliance is intended for household use only.

The appliance is equipped with a polarized plug. This type of plug has one blade wider than the other. The plug will fit into an electrical outlet only one way. This is a safety feature intended to help reduce

1. Release/Insert Button

2. Magnetic Lid Holder

3. Can Guide Pin

4. Cutting Assembly Lever

5. Geared Wheel

the risk of electrical shock. If you are unable to insert the plug into the outlet, try reversing the plug. If the plug should still fail to fit, contact a qualified electrician to replace the obsolete outlet. Do not attempt to defeat the safety purpose of the polarized plug by modifying the plug in any way.

The length of the cord used on this appliance was selected to reduce the hazards of becoming tangled in, or tripping over a longer cord. If a longer cord is necessary an approved extension cord may be used. The electrical rating of the extension cord must be equal to or greater than the rating of the can opener. Care must be taken to arrange the extension cord so that it will not drape over the countertop or tabletop where it can be pulled on by children or accidentally tripped over.

WARNING: To reduce the risk of personal injury, keep hair and loose clothing away from lid opener and other moving parts of the can opener while using.

Parts and Features

840098300 ENv01.qxd 2/14/02 8:38 AM Page 2

Using Your Can Opener

1. Place can opener on level surface.

2. Plug cord into electrical outlet.

3. Raise cutting assembly lever.

4. Place rim of can firmly under

can guide pin and against geared wheel.

5. Press lever all the way down.

6. The motor will begin turning can

and cutting lid. (It is not necessary to hold the lever down or to hold the can during the cutting action.)

7. The motor will automatically stop when the can is open.

(Use the flip-up magnet to easily see can position.)

Cleaning Your Can Opener

1. Unplug cord from electrical outlet.

2. To remove cutting assembly,

push release/insert button to right. Grasp magnetic lid holder and pull lever out.

3. Wash lever in hot, soapy water. Rinse and dry thoroughly.

4. Wipe body of can opener with a damp cloth. NEVER immerse the can opener in water.

5. To insert cutting assembly,

push release/insert button to right and insert the lever.

6. Ensure lever is fully inserted into the can opener.

Knife Sharpener

Insert blade into the slot and pull the knife through and slightly up toward you. Most knives can be sharpened with 5 to 6 passes. Clean knife after sharpening.

NOTE: Serrated blades should never be inserted into this unit.

Cord Storage and Lock

When finished, unplug and push the excess cord into the back of the unit for storage.

To lock the cord, turn cord sideways and slide up into cord lock slot.

Fully Inserted

Incorrectly Inserted

840098300 ENv01.qxd 2/14/02 8:38 AM Page 4

+ 5 hidden pages