5
4
How To Use
1. Before first use, please clean the 
coffee grinder.
2. Remove cover by turning counter-
clockwise to the unlock position, 
then lift straight up.
3. Using measurements on cover, 
fill with desired amount of coffee 
beans and pour into grinding 
chamber or scoop beans directly 
into grinding chamber.
4. Place cover onto grinder making sure
that arrow on cover is aligned with 
unlock symbol on back of grinder. 
Then turn lid clockwise to the locked 
position.
5. Hold the plug and pull slowly to
release stored cord. Plug into outlet.
6. Move the grind setting switch to 
the amount to be ground and 
desired fineness of grind.
7. Press and hold the ON/OFF button.
Release button once grinder begins. 
The grinder will stop automatically 
when grinding is complete. To stop 
grind cycle at anytime, push the 
ON/OFF button. When the ON/OFF 
button is pressed again, grinder will 
start from beginning of timed cycle.
8. When finished unplug grinder, clean grinding chamber, and
rewind cord. 
NOTE: The grinder will only operate with cover in the
locked position.
Tips
• For best flavor, store coffee beans in an airtight container.
• Grind beans immediately before brewing.
• When grinding more than 12 scoops of coffee beans, pour 
beans into cover, then turn grinder upside down and lock onto 
cover. Be sure to align tab on lid with the unlock symbol.
• Grinding times will vary by amount and fineness setting:
COARSE 9 to 13 seconds (Percolator, French Press) 
MED 14 to 17 seconds (Auto Drip) 
FINE 25 to 28 seconds (Espresso)
• To ensure optimal grinding performance, allow your coffee 
grinder to cool for at least one minute between uses.
• Coffee flavor and strength is a personal preference. Vary the 
type of coffee beans, amount of coffee and fineness of 
grind to find the flavor you prefer.
• To grind amounts not on controls, select the next closest 
amount listed.
How To Clean
1. Unplug from outlet before cleaning.
2. Carefully wipe the grinding chamber
with a soft, damp cloth. Be careful 
cleaning around sharp blades.
3. Rinse and dry cover. Wipe grinder
with a damp cloth.
4. Hold grinder and turn the base in
direction of arrow to rewind cord.
Do not immerse coffee grinder in water or other liquid.