Hamilton Beach 78213 Quick Start Guide

Quick Start Guide

Making Bags From Bag Rolls

Determine size of bag needed
based on size of what is being
vacuum-sealed. Allow enough
space for sealing top and
bottom of bag. Cut to size.

NOTES:

• Never open the lid during use.

• Do not let moisture into the vacuum chamber.

This may damage the motor.

Center open end of bag within
vacuum chamber.

3 421

Close and hold lid; then press
Seal Only button. Continue
holding lid closed during
entire sealing process.

w CAUTION

Seal bar is hot. Avoid touching it.

Wait until light turns green
before letting go of lid and
removing bag. Allow unit to cool
20 seconds between each use.

Burn Hazard.

Quick Start Guide

Making Bags From Bag Rolls

Determine size of bag needed
based on size of what is being
vacuum-sealed. Allow enough
space for sealing top and
bottom of bag. Cut to size.

NOTES:

• Never open the lid during use.

• Do not let moisture into the vacuum chamber.

This may damage the motor.

Center open end of bag within
vacuum chamber.

3 421

Close and hold lid; then press
Seal Only button. Continue
holding lid closed during
entire sealing process.

w CAUTION

Seal bar is hot. Avoid touching it.

Wait until light turns green
before letting go of lid and
removing bag. Allow unit to cool
20 seconds between each use.

Burn Hazard.

880025500 V03.indd 1 11/6/15 9:28 AM

How to Vacuum-Seal

Add food to heat-seal bag. Center open edge of bag

within vacuum chamber.

NOTES:

• Never open the lid during use.

• Do not let moisture into the vacuum chamber.

This may damage the motor.

3 421

Close and hold lid; then
press Vacuum & Seal button.
Continue holding lid closed
during entire vacuum and
sealing process.

w CAUTION

Seal bar is hot. Avoid touching it.

Wait until light turns green and
lid releases before letting go of
lid and removing bag. Allow 20
seconds between each use.

Burn Hazard.

880025500 11/15

How to Vacuum-Seal

Burn Hazard.

Add food to heat-seal bag. Center open edge of bag

within vacuum chamber.

3 421

Close and hold lid; then
press Vacuum & Seal button.
Continue holding lid closed
during entire vacuum and
sealing process.

w CAUTION

Seal bar is hot. Avoid touching it.

Wait until light turns green and
lid releases before letting go of
lid and removing bag. Allow 20
seconds between each use.

NOTES:

• Never open the lid during use.

• Do not let moisture into the vacuum chamber.

This may damage the motor.

880025500 11/15

880025500 V03.indd 2 11/6/15 9:28 AM