Hamilton Beach 52230C User Manual
Blenders
Mélangeurs
English .................................................. 2
USA: 1-800-851-8900
Français .............................................. 10
Canada : 1-800-267-2826
Español .............................................. 18
En México: 01-800-71-16-100
Le invitamos a leer cuidadosamente este
instructivo antes de usar su aparato.
Licuadoras
840144900
READ BEFORE USE
À LIRE AVANT UTILISATION
LEA ANTES DE USAR
840144900 ENv02.qxd 1/4/06 4:36 PM Page 1
2
3
IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS
When using electric appliances, basic safety precautions should
always be followed, including the following:
1. Read all instructions. Keep these instructions for future reference.
2. Verify that the voltage in your home corresponds to that of your
appliance.
3. To protect against risk of electrical shock, do not put cord, plug,
base, or motor in or near water or other liquid.
4. Close supervision is necessary when any appliance is used by or
near children.
5. Unplug cord from outlet when not in use, before putting on or
taking off parts, and before cleaning.
6. Avoid contact with moving parts.
7. Do not operate any appliance with a damaged cord or plug, or
after the appliance malfunctions or is dropped or damaged in
any manner. Call our toll free customer service number on
the front cover information on examination, electrical repair,
mechanical repair, or adjustment.
8. The use of attachments, including canning jars, not recommended
or sold by Hamilton Beach/Proctor-Silex, Inc. may cause a
risk of injury to persons.
9. Do not use outdoors.
10. Do not let cord hang over edge of table or counter, or touch hot
surfaces, including the stove.
11. Keep hands and utensils out of container while blending to
reduce the risk of severe personal injury and/or damage to
blender. A rubber spatula may be used but must be used only
when blender is not running.
12. Blades are sharp, handle carefully.
13. Do not use a broken, chipped or cracked blender jar.
14. Do not use broken, cracked or loose cutting blades.
15. To reduce the risk of injury, never place cutting blades on base
without jar properly attached.
16. Always operate blender with cover in place.
17. When blending hot liquids, remove center piece of two-piece
cover. Do not fill blender container beyond the 3 cup level.
Always begin processing at the lowest speed setting. Keep
hands and other exposed skin away from the cover opening to
prevent possible burns.
18. Screw on jar retaining ring firmly. Injury can result if moving
blades accidentally become exposed.
19. If the jar should turn when the motor is switched ON, switch
OFF immediately and tighten jar in threaded retaining ring.
20. Do not leave blender unattended while it is operating.
21. To disconnect cord, turn the control to OFF, then remove plug
from wall outlet.
22. Do not use appliance for other than intended purpose.
Shock Hazar
d
• Do not immerse this appliance in water or other liquid.
• This appliance has a polarized plug (one wide blade) that
reduces the risk of electrical shock.
The plug fits only one way into a polarized outlet. Do not defeat
the safety purpose of the plug by modifying the plug in any way
or using an adaptor. If the plug does not fit, reverse the plug. If it
still does not fit, have an electrician replace the outlet.
WARNING
840144900 ENv02.qxd 1/4/06 4:36 PM Page 2
5
1. Filler-Cap
2. Lid
3. Jar
PULSE Button – For instant
control the Pulse operates
only as long as the button is
held down. The blender
motor stops when the
button is released.
4. Cutting Blades
5. Jar Nut
6. Base
7. Control Panel
NOTE: Rubber gasket is
permanently affixed to the
blades. Do not try to
remove it.
4
OTHER CONSUMER SAFETY INFORMATION
This appliance is intended for household use only. Use for food
or liquids only.
The length of the cord used on this appliance was selected to reduce
the hazards of becoming tangled in, or tripping over a longer cord. If
a longer cord is necessary an approved extension cord may be used.
The electrical rating of the extension cord must be equal to or greater
than the rating of the blender. Care must be taken to arrange the
extension cord so that it will not drape over the countertop or tabletop
where it can be pulled on by children or accidentally tripped over.
If the cutting blades lock and do not move, it will damage the motor.
Do not use. Call the toll-free customer service number for information.
Do not place blender jar in the freezer filled with food or liquid. This
will freeze and damage the cutting blades, jar, and motor.
Parts and Features
840144900 ENv02.qxd 1/4/06 4:36 PM Page 4
7
6
7. Process food or beverages. Place hand on lid when
blending liquids. Push button on control panel to start
blender.
8. ALWAYS turn blender off and wait until blades have
stopped rotating before removing jar.
9. To remove jar after blending is complete, lift the jar
straight up. If it is not easily removed, rock gently and lift.
Do not twist.
10. NEVER replace jar onto unit while motor is running.
How to Clean the Blender
1. Unplug blender from electrical outlet.
2. Wipe blender base, control panel, and cord with a damp
cloth or sponge. To remove stubborn spots, use a mild,
non-abrasive cleanser.
3. To clean jar, unscrew jar nut and remove cutting blades
from jar.
4. Carefully remove cutting blades from jar nut.
5. Carefully wash blades, jar nut, jar (if plastic), and cover in
hot, soapy water. Rinse and dry thoroughly. Do not soak.
Do not wash blades, jar nut, plastic jar, or cover in a
dishwasher.
6. Reassemble cutting blades onto jar, replace jar onto
blender base.
7. Store blender with cover ajar to prevent container odor.
Before First Use
After unpacking the blender, wash everything except the
blender base in hot, soapy water. Dry thoroughly. Do not place
in dishwasher. Wipe the blender base with a damp cloth or
sponge. DO NOT IMMERSE THE BASE IN WATER. Care
should be taken when handling the blades as they are very
sharp.
How to Assemble and Use
IMPORTANT: Your blender jar and cutting blades are subject
to wear during normal use. Always inspect jar for nicks, chips
or cracks. Always inspect cutting blades for broken, cracked
or loose blades. If jar or cutting blades are damaged, do
not use. Contact an authorized service facility to obtain
replacement parts.
1. Make sure blender is unplugged. Place blender base on
clean, dry surface to keep foreign particles from being
pulled up into motor during operation.
2. Place blades in jar nut. Screw jar onto the jar nut with
cutting blades.
3. Make sure the jar nut is firmly screwed onto the jar. If not,
it may loosen later when motor is turned on.
4. Set jar into place on blender base, making sure it is
securely seated. If not, gently rock the jar until seated.
5. Plug cord into outlet.
6. Put ingredients in jar, place lid on jar.
840144900 ENv02.qxd 1/4/06 4:36 PM Page 6
9
8
General Tips
• For best blending performance, the minimum amount of liquid recommended per recipe is one cup (8 oz./250 ml). Add
more liquid if food is not blending properly.
• Processing hot foods or liquids in the blender may cause
hot liquid to spurt out when the cover is removed. Always
remove the filler-cap from the cover before blending hot
foods or liquids.
• To add foods when blender is operating, remove
filler-cap from container cover and add ingredients through
the opening.
• If blending action stops during blending or ingredients stick
to sides of the jar, turn blender OFF. Remove cover and use
a rubber spatula to push mixture toward blades.
• Do not try to mash potatoes, mix stiff dough, whip egg
whites, grind raw meat, or extract juices from fruits and
vegetables. The blender is not made to perform these tasks.
• Do not store food or liquids in the blender jar.
• Avoid bumping or dropping the blender.
Customer Service
If you have a question about your blender, call our toll-free
customer service number. Before calling, please note the
model, type, and series numbers and fill in that information
below. These numbers can be found on the bottom of your
blender. This information will help us answer your question
much more quickly.
MODEL:_____________ TYPE:_____________ SERIES: ______________
The following warranty applies only to product purchased
in the United States and Canada.
LIMITED WARRANTY
This product is warranted to be free from defects in material and workmanship for a
period of three (3) years for Hamilton Beach products or one hundred eighty (180)
days for Proctor-Silex and Traditions products from the date of original purchase,
except as noted below. During this period, we will repair or replace this product, at our
option, at no cost. THE FOREGOING WARRANTY IS IN LIEU OF ANY OTHER
WARRANTY OR CONDITION, WHETHER EXPRESS OR IMPLIED, WRITTEN OR
ORAL INCLUDING, WITHOUT LIMITATION, ANY STATUTORY WARRANTY OR
CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
ANY LIABILITY IS EXPRESSLY LIMITED TO AN AMOUNT EQUAL TO THE
PURCHASE PRICE PAID, AND ALL CLAIMS FOR SPECIAL, INCIDENTAL AND
CONSEQUENTIAL DAMAGES ARE HEREBY EXCLUDED. There is no warranty with
respect to the following, which may be supplied with this product, including without
limitation: glass parts, glass containers, cutter/strainers, blades, seals, gaskets,
clutches, motor brushes, and/or agitators, etc. This warranty extends only to the
original consumer purchaser and does not cover a defect resulting from abuse,
misuse, neglect including failure to clean product regularly in accordance with
manufacturer’s instructions, use for commercial purposes, or any use not in conformity
with the printed directions. This warranty gives you specific legal rights, and you may
also have other legal rights which vary from state to state, or province to province.
Some states or provinces do not allow limitations on implied warranties or special,
incidental or consequential damages, so the foregoing limitations may not apply to
you.
If you have a claim under this warranty, DO NOT RETURN THE APPLIANCE TO THE
STORE! Please call our CUSTOMER SERVICE NUMBER. (For faster service please
have model, series, and type numbers ready for operator to assist you.)
CUSTOMER SERVICE NUMBERS
In the U.S. 1-800-851-8900
In Canada 1-800-267-2826
hamiltonbeach.com or proctorsilex.com
KEEP THESE NUMBERS FOR FUTURE REFERENCE!
840144900 ENv02.qxd 1/4/06 4:36 PM Page 8
Loading...