Hamilton Beach 14978 Owner's Manual

READ BEFORE USE LIRE AVANT UTILISATION LEA ANTES DE USAR

Visit www.hamiltonbeach.com for our complete line of products and Use and Care Guides – as well as delicious recipes, tips, and to register your product online!

Rendez-vous sur www.hamiltonbeach.ca pour notre liste complète de produits et de nos manuels utilisateur – ainsi que nos délicieuses recettes, nos conseils et pour enregistrer votre produit en ligne !

¡Visite www.hamiltonbeach.com.mx para obtener nuestra línea completa de productos y las Guías de Uso y Cuidado, además de deliciosas recetas, consejos y para registrar su producto en línea!

Iron

Fer à repasser

Questions? Please call us – our friendly associates are ready to help. USA: 1.800.851.8900

Questions ? N’hésitez pas à nous appeler – nos associés s’empresseront de vous aider. CAN : 1.800.267.2826

¿Preguntas? Por favor llámenos – nuestros amables representantes están listos para ayudar. MEX: 01 800 71 16 100

Le invitamos a leer cuidadosamente este instructivo antes de usar su aparato.

English ...................... 2

Français ................... 13

Plancha

Español ................... 25

840228300 ENv02.indd 1840228300 ENv02.indd 1 4/23/13 9:08 AM4/23/13 9:08 AM

IMPORTANT SAFETY INSTRUCTIONS

When using your flatiron, basic safety precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING

1. Only use an iron for its intended use.

2. To avoid the risk of electric shock, do not immerse the iron

in water or other liquids.

3. Always turn the iron to OFF before plugging or unplugging

the iron from the electrical outlet. Never pull on the cord to disconnect the iron from the electrical outlet; instead, grasp the plug and pull on the plug to disconnect the iron.

4. Do not let the cord touch hot surfaces. Let the iron cool

completely before putting the iron away. Coil the cord loosely around the iron for storing.

5. Always disconnect the iron from the electrical outlet before

filling the iron with water, emptying the water from the iron, and when the iron is not in use.

6. Do not operate the iron with a damaged cord or in the event

the iron has been dropped or damaged or there are visible signs of damage or it is leaking. To avoid the risk of electric shock, do not disassemble the iron. Take it to a qualified serviceman for examination and repair. Incorrect assembly might result in a risk of electric shock when the iron is used after reassembly.

7. The iron must be used and rested on a stable surface.

8. When placing the iron on its stand, ensure that the surface

on which the stand is placed is stable.

9. Close supervision is required for any appliance used by or

near children. Do not leave the iron unattended while the iron is connected or on an ironing board.

10. Burns can occur from touching hot metal parts, hot water, or

steam. Use caution when you turn a steam iron upside down— there might be hot water in the reservoir.

11. To avoid a circuit overload, do not operate an iron on the same

circuit with another high-wattage appliance.

12. If an extension cord is absolutely necessary, a cord with an

ampere rating equal to or greater than the maximum rating of the iron shall be used. A cord rated for less amperage can result in a risk of fire or electric shock due to overheating. Care shall be taken to arrange the cord so that it cannot be pulled or be tripped over.

SAVE THESE INSTRUCTIONS!

840228300 ENv02.indd 2840228300 ENv02.indd 2 4/23/13 9:09 AM4/23/13 9:09 AM

Other Consumer Safety Information

This product is intended for household use only. WARNING! Shock Hazard: This appliance has a polarized plug

(one wide blade) that reduces the risk of electric shock. The plug fits only one way into a polarized outlet. Do not defeat the safety purpose of the plug by modifying the plug in any way or by using an adapter. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, have an electrician replace the outlet.

• Use the iron on an ironing board. Ironing on any other surface may damage that surface.

• Do not iron or vertical-steam clothes that are being worn.

• Do not use vertical steam in the direction of people or pets.

• During first use of the iron, it may appear to smoke. This will stop and does not indicate a defect or hazard.

• Many irons spit or sputter during the first few uses with tap water. This happens as the steam chamber becomes conditioned. This will stop after a few uses.

• To clean steam vents before first use, prepare iron for steam ironing and then iron over an old cloth for a few minutes while letting the iron steam. Press the Steam Burst button several times to clean the vents. Then follow the self-cleaning instructions on page 10.

840228300 ENv02.indd 3840228300 ENv02.indd 3 4/23/13 9:09 AM4/23/13 9:09 AM

Parts and Features

Water Tank Cover

Spray Nozzle

Adjustable Steam Switch

Soleplate

Spray and Steam Burst Buttons

Soft Touch Grip

Heel Rest

Temperature Control Dial

Self-Clean Button

840228300 ENv02.indd 4840228300 ENv02.indd 4 4/23/13 9:09 AM4/23/13 9:09 AM

How to Dry Iron

21 3 4

Set the Adjustable Steam Switch to (Dry Iron).

Turn Temperature Control Dial to desired temperature. Allow 2 minutes for iron to reach desired temperature.

POSITION SENSING/AUTO SHUTOFF

The iron will turn off automatically when left in the following positions. The Auto Shutoff time varies based on the iron’s position.

IRON POSITION

MOTIONLESS TIME

Resting on soleplate

To turn iron off, turn Temperature Control Dial to OFF. Unplug iron and let cool.

840228300 ENv02.indd 5840228300 ENv02.indd 5 4/23/13 9:09 AM4/23/13 9:09 AM

Resting on either side

Resting on heel

30 seconds

30 seconds or 15 minutes depending on exact orientation

15 minutes

How to Steam Iron

Set the Adjustable Steam Switch to (Dry Iron).

Set Adjustable Steam Switch to the desired steam level.

840228300 ENv02.indd 6840228300 ENv02.indd 6 4/23/13 9:09 AM4/23/13 9:09 AM

6 6

For vertical steaming, hold iron 6 inches (15 cm) from garment and do not allow hot soleplate to touch delicate garments. Press and release the Steam Burst Button to steam out wrinkles. Wait at least 5 seconds before pressing Steam Burst Button again.

Turn Temperature Control Dial to desired fabric setting in the steam range. Allow 2 minutes for iron to reach desired temperature.

WARNING! Burn Hazard: Attempting to steam iron on a lower temperature setting or failing to allow the iron to preheat for 2 minutes can result in hot water dripping from the soleplate.

How to Steam Iron (cont.)

7 8

To turn iron off, set Adjustable Steam Switch to (Dry Iron).

840228300 ENv02.indd 7840228300 ENv02.indd 7 4/23/13 9:09 AM4/23/13 9:09 AM

Turn the Temperature Control Dial to OFF. Unplug iron and let cool.

POSITION SENSING/AUTO SHUTOFF

The iron will turn off automatically when left in the following positions. The Auto Shutoff time varies based on the iron’s position.

IRON POSITION

Resting on soleplate

Resting on either side

Resting on heel

Empty water from iron following directions in “Care and Cleaning.”

MOTIONLESS TIME

30 seconds

30 seconds or 15 minutes depending on exact orientation

15 minutes

Fabric Setting Chart Garment Label

NOTICE: To avoid garment damage, check garment label for fabric composition and ironing instructions.

Steam

Setting

Dry

Iron

Steam Range

Temperature

Setting

OFF Synthetics

Silk, Wool

Cotton, Linen

•

Low

••

Medium

•••

High

Ironing

Instructions

OFF Dry iron using spray

if necessary. Iron silk on wrong

side.

For cotton, iron while still damp or use spray. For linen, iron fabric on wrong side.

Symbols

Fabric care labels on garments have symbols that show ironing instructions and recommended temperature settings. These symbols are shown below along with an explanation of their meaning.

Iron

High

Temp

Setting

Do not iron

Medium

Temp

Setting

Do not use

steam

Low Temp

Setting

840228300 ENv02.indd 8840228300 ENv02.indd 8 4/23/13 9:09 AM4/23/13 9:09 AM

Care and Cleaning

Allow iron to cool.

2 3

To empty water from iron, open the water tank cover and slowly tilt pointed end of iron over sink until water runs out.

Do not store iron laying flat on soleplate.

Soleplate Care

NOTICE: To avoid damage to the iron soleplate:

• Never iron over zippers, buttons, pins, metal rivets, or snaps, since they may scratch the soleplate surface.

• Allow the iron to cool and wipe with a soapy, soft damp cloth to clean occasional buildup on the soleplate. Never use abrasive cleaners or metal scouring pads, since they may scratch the surface.

840228300 ENv02.indd 9840228300 ENv02.indd 9 4/23/13 9:09 AM4/23/13 9:09 AM

Self-Clean Feature

To keep the steam vents clear of any buildup, follow these instructions each time you iron using steam.

1 2

Hold iron over sink.

840228300 ENv02.indd 10840228300 ENv02.indd 10 4/23/13 9:09 AM4/23/13 9:09 AM

Press and hold the Self-Clean Button until tank is empty.

Turn Temperature Control Dial to Cotton-Linen ••• setting and let iron heat for 2 minutes.

Turn the Temperature Control Dial to OFF. Unplug iron.

Troubleshooting

PROBLEM

Iron won’t heat.

Water is leaking.

Iron won’t steam.

Iron leaves spots on clothing.

Twisted cord.

Wrinkles not removed.

Iron too hot/not hot enough.

PROBABLE CAUSE/SOLUTIONS

• Is iron plugged in and the outlet working? Check outlet by plugging in a lamp.

• Has a temperature been selected?

• Is the Auto Off function activated? Move or tilt the iron to reset.

• Do not overfill the water tank.

• Adjust steam to a lower setting.

• If steam ironing, is the Adjustable Steam Switch in a steam position? Has a temperature been selected? Did the iron have enough time to preheat?

• If dry ironing, make sure the Adjustable Steam Switch is in the (Dry Iron) position.

• Check water level.

• Is the Adjustable Steam Switch in the (Steam) position?

• Has the iron had enough time to preheat?

• Anti-drip feature will not allow steam when temperature setting is in the dry range.

• ALWAYS empty water tank after using. Water left in tank may discolor clothing and soleplate.

• If the iron cord should become twisted, unplug iron and let cool. Hold iron cord in the middle of entire length. Let plug and iron dangle freely until cord uncoils. This will extend the life of the iron cord.

• Choose correct temperature setting for your fabric.

• Adjust temperature to desired setting. Let iron cool down 5 minutes before continuing.

840228300 ENv02.indd 11840228300 ENv02.indd 11 4/23/13 9:09 AM4/23/13 9:09 AM

+ 25 hidden pages