Caution:
Please read the instructions carefully and completely
before using the appliance.
1. The blades are very sharp! Handle with care.
2. Always unplug the appliance before assembling,
disassembling, cleaning.
3. Before plugging into a socket, check whether your
voltage corresponds to the rating label of the appliance.
4. Don’t let children play with this appliance.
5. Don’t let the motor unit, cord, or plug get wet.
6. Never use a damaged appliance. If it has been damaged,
please get it to approved service centre, checked or
repaired.
7. Don’t let excess cord hang over the edge of the table or
worktop or touch hot surface.
8. Remove the blade emptying the bowl/jug.
9. Don’t plug the appliance into the power supply until it is
fully assembled and always unplug before disassembling
the appliance or handle the blade.
10. The appliance is constructed to process normal
household quantities.
1
Description:
A. Motor unit G. Accessory base
B. ON/OFF switch H. Gear box
C. Inching switch K. Big “S” blade
D. Plastic blender stick L. Chopper jug
E. (a)Gear box O. Vessel
F. Whisk
2
Important
KB of stick blender: 1 min
KB of whisk: 2 min
KB of chopper: 30sec
3
Setting the speed
Depending on the appliance, we recommend the following speed
setting:
Hand blender 1……turbo
Chopper 1……turbo
Whisk 2……4
How to use the hand blender
The hand blender is perfectly suited for preparing dips, sauces, soups,
mayonnaise and baby food as well as for mixing and milkshakes.
1. Turn the blender stick on the motor unit until it locks.
2. Introduce the hand blender in the vessel. Then press the ON/OFF
switch or the ON/OFF turbo switch.
3. Turn the blender stick off the motor unit after use.
You can use the hand blender in the measuring beaker and just as well
in any other vessel. When blending directly in the saucepan while
cooking take hand blender from overheating.
How to use your whisk
Use the whisk only for whipping cream, beating egg whites and
mixing sponges and ready-mix desserts.
1. Inset the whisk into the whisk gear box, then turn the gear box on
the motor unit until it locks.
2. Place the whisk in a vessel and only then. Press the switch to
operate it.
3. Turn the gear box off the motor unit after use. Then pull the whisk
out of the gear box.
4
Loading...