HAMEG HMS3000, HMS3010 User Guide

3GHz Spectrum Analyzer

HMS3000/ HMS3010

1stQuarter

2009

HMS3010

 Frequency range 100kHz…3GHz

 Amplitude measurement range -114dBm…+20dBm

 Sweep time 20ms...1000s

 Resolution bandwidth 100Hz…1MHz in 1-3 Steps, 200kHz (-3dB)

additional 200Hz, 9kHz, 120kHz, 1MHz (-6dB)

 Spectral purity ‹ -100dBc/Hz (@100kHz)

 Video bandwidth 10Hz...1MHz in 1-3 steps

 Tracking Generator (HMS3010) -20dBm…0dBm in 1dB steps

 Integrated AM and FM demodulator (headset output)

 Detectors: Auto-, min-, max-peak, sample, RMS, quasi-peak

 8 Marker with delta marker, miscellaneous peak functions

 Silent operation (no fan)

 6.5” TFT color VGA display, DVI output

 3 x USB for mass-storage, printer and remote control

optional IEEE-488 (GPIB) or Ethernet/USB Interface

VSWR Test Unit HZ547

3GHz EMI Near Field Probe
Set HZ550L

3GHZ Spectrum Analyzer
HMS3000 without TG

1GHz Spectrum Analyzer HMS1000, HMS1010 (with TG)
3GHz Spectrum Analyzer HMS3000, HMS3010 (with TG)

All data valid at 23 °C after 30 minute warm-up

Frequency

Frequency range:

HMS1000, HMS1010 100kHz...1GHz

HMS3000, HMS3010 100kHz…3GHz
Temperature stability: ± 2ppm (0...30°C)
Aging: ± 1ppm/year
Frequency counter:

Resolution 1Hz

Accuracy ± (Frequency x failure of reference)
Span setting range:

HMS1000, HMS1010 0Hz (zero span) and 1kHz…1GHz

HMS3000, HMS3010 0Hz (zero span) and 100Hz…3GHz
Spectral purity, SSB phase noise:

30kHz from carrier

(500MHz, +20°C...30°C) ‹-85dBc/Hz

100kHz from carrier

(500MHz, +20°C...30°C) ‹-100dBc/Hz

1MHz from carrier

(500MHz, +20°C...30°C) ‹-120dBc/Hz

Sweep time:

Span = 0Hz 20ms...100s

Span › 0Hz 20ms...1000s, min. 20ms/600MHz
Resolution bandwidths (-3 dB):

HMS1000, HMS1010 1kHz...1MHz in 1–3 steps, 200kHz

HMS3000, HMS3010 100Hz...1MHz in 1–3 steps, 200kHz

Tolerance:

≤ 300 kHz ± 5% typ.
1MHz ± 10% typ.

Resolution bandwidths (-6 dB):

HMS1000, HMS1010 9kHz, 120kHz,1MHz

HMS3000, HMS3010 200Hz, 9kHz, 120kHz, 1MHz
Video bandwidths: 10Hz...1MHz in 1–3 steps

Amplitude

Display range: Average noise trace up to +20dBm
Amplitude measurement range: Typ. -114dBm...+20dBm
Max. permissible DC at HF input: 80V
Max. power at HF input: 20dBm, 30dBm für max. 3 Min.
Intermodulation free range:

IM3 products, 2 x –20dBm

(-10dBm ref. level) 66dB typ. (typ. +13dBm third-order intercept)

(at distance between

signals ≤ 2MHz) 60dB typ. (+10dBm TOI)

(at distance between

signals › 2MHz) 66dB typ. (typ. +13dBm TOI)
DANL (Displayed average noise level):

(RBW 1kHz, VBW 10Hz,

ref. level ≤ –30dBm

10MHz...1GHz resp. 3GHz) -105dBm, typ. -114dBm

With Preamp. -135dBm typ. (100Hz RBW)

Inherent spurious:

(ref. level≤ -20dBm,

f ‹ 30MHz, RBW≤ 100kHz) ‹ -80dBm

Input related spurious:

(Mixer level ≤ -40dBm,

carrier offset ›1MHz) -70dBc typ., -55dBc (2…3GHz)

2nd harmonic receive frequency

(mixer level -40dBm): -60dBc typ.

Level display:

Reference level -80dBm...+20dBm in 1dB steps

Display range 80dB, 40dB, 20dB, 10dB, linear

Logarithmic display scaling dBm, dBμV, dBmV

Linear display scaling μV, mV, V, nW, μW, mW, W
Measured curves: 1 curve and 1 memory curve
Trace Mathematics: A-B (curve-stored curve), B-A
Detectors: Auto-, Min-, Max-Peak, Sample, RMS,

Average, Quasi-Peak

Failure of level display: ‹ 1,5dB, typ. 0,5dB

(ref. level to ref. level-50dB, 20°C…30°C)

Marker / Deltamarker

Number of marker: 8
Marker functions: Peak, next peak, minimum, center = marker

frequency, reference level = marker level,
all marker on peak

Marker displays: Normal (level), noise marker,

(frequency) counter

Inputs / Outputs

HF Input N socket

Input Impedance: 50Ω
VSWR (10MHz…1GHz/ 3GHz): ‹ 1,5 typ.

Output tracking generator:

(HMS1010/HMS3010) N socket
Output Impedance: 50Ω
Frequency range: 5MHz…1GHz / 3GHz

Output level: -20dBm...0dBm in 1dB steps
Trigger and external
reference input: BNC socket, switchable

Trigger voltage TTL

Reference frequency 10MHz

Essential level (50Ω) 10dBm
Supply output for field probes: 6VDC, max. 100mA (2,5mm DIN jack)
Audio output (Phone): 3,5mm DIN jack

Demodulation AM and FM

Miscellaneous

Display: 6,5" TFT Color VGA Display

Save / Recall memory: 10 complete device settings

Trigger: Free run, Video Trigger, external Trigger
Interfaces: Dual-Interface USB/RS-232 (HO720),

USB-Stick (frontside),
USB-Printer (rear side) from SW 2.0,
DVI for ext. monitor

Power supply: 105/253 V, 50/60 Hz, CAT II
Power consumption: Max. 40Watt at 230V, 50 Hz
Protection class: Safety class I (EN61010-1)
Operating temperature: +5°C...+40°C
Storage temperature: -20°C...+70°C
Max. rel. humidity: 5%...80% (non condensing)
Dimensions (W x H x D): 285 x175x 220 mm
Weight: 3.6 kg

Accessories supplied:

Line cord, Operating manual, Dual-Interface
USB/RS-232 (HO720), CD, HZ21 Adapter plug (N plug to BNC socket)

Optional accessories:

HO3011 Preamplifier -135dBm DANL (100Hz RBW)
HO730 Dual-Interface Ethernet/USB
HO740 Interface IEEE-488 (GPIB), galvanically isolated
HZ547 3GHz VSWR Test Unit for HMS1010, HMS3010
HZ520 Plug-in Antenna with BNC connection
HZ530 Near-Field Probe Set 1GHz for EMV diagnostics
HZ540 Near-Field Probe Set 3GHz for EMV diagnostics
HZ560 Transient limiter
HZ575 75/50Ω Converter
HZ46 4RU 19'' Rackmount Kit

HM3000/3010E/061108/ce · Subject to alterations · © HAMEG Instruments GmbH®· DQS-certified in accordance with DIN EN ISO 9001:2000, Reg.-No.: DE-071040 QM

HAMEG Instruments GmbH · Industriestr. 6 · D-63533 Mainhausen · Tel [phone] · Fax [phone] · www.hameg.com · [e-mail]

www.hameg.com