HAMEG HMO3522, HMO3524 User Guide

 4GSa /s Real time, 50GSa/s Random sampling,

low noise flash A/D converter (reference class)

 2MPts memory per channel, memory oom up to 100,000:1

 MSO (Mixed Signal Opt. HO3508) with 8 /16 logic channels

 Vertical sensitivity 1mV...5V/div. (into 1MΩ/50Ω)

Offset control ±0,2...±20V

 12div. x-axis display range

 Trigger modes: slope, video, pulsewidth, logic,

delayed, event

 FFT for spectral analysis

 6 digit counter, Autoset, automeasurement, formula editor

 6.5” TFT VGA display, DVI output

 3 x USB for mass storage, printer and remote ctrl.

optional IEEE-488 or Ethernet/USB

350MHz 2/4 Channel Digital Oscilloscope

HMO3522/HMO3524

HMO3524

1stQuarter

2009

The operating mode XYZ

Quickview provides all avai­lable automeasurements at
the push of a button

8 Channel
logic probe HO3508

HMO3522[3524]E/031108/ce · Subject to alterations · © HAMEG Instruments GmbH

®

· DQS-certified in accordance with DIN EN ISO 9001:2000, Reg.-No.: DE-071040 QM · www.hameg.com

350 MHz 2 [4] Channel Digital Oscilloscope

HMO3522 [HMO3524]

All data valid at 23 °C after 30 minute warm-up

Display

Display: 6,5” VGA Color TFT
Resolution: 640 x 480 Pixel
Backlight: LED 400cd/m

2

Display area for curves:

without menu 400 x 600 Pixel (8 x 12 div.)

with menu 400 x 500 Pixel (8 x 10 div.)
Color depth: 256 colors
Intensity steps per channel: 0…31

Vertical System

Channels:

DSO mode CH1, CH2 [CH1...CH4]

MSO mode CH1, CH2 LCH 0...15 (logic channels)

with 2 x Option HO3508

Auxiliary input: Frontside [Rear side]

Function Ext. Trigger

Impedance 1MΩ || 13pF ± 2pF

Coupling DC, AC

Max. input voltage 100V (DC + peak AC)
XYZ-mode: All analog channels on individual choise
Invert: CH 1, CH 2 [CH1...CH4]
Y-bandwidth (-3dB): 350MHz (5mV...5V) / div.

100MHz (1mV, 2mV)/div.

Lower AC bandwidth: 2Hz
Bandwidth limiter
(switchable): approx. 20MHz
Rise time (measured): ‹ 1ns
DC gain accuracy 2%
Input sensitivity: 12 calibrated steps

CH1, CH2 [CH1...CH4] 1mV/ div.…5V/div. (1-2-5 Sequence)
Variable Between calibrated steps

Inputs CH1, CH2 [CH1…CH4]:

Impedance 1MΩ II 13pF ± 2pF (50Ω switchable)

Coupling DC, AC, GND

Max. input voltage 200V (DC + peak AC), 50Ω ‹5V

eff

Measuring circuits: Measuring Category I (CAT I)
Position range ± 10Divs
Offset control:

1mV, 2mV ± 0,2V

5mV…50mV ±1V

100mV…5V ±20V
Logic channels With Option HO3508

Select. switching thresholds TTL, CMOS, ECL, 2 x User -2V…+8V

Impedance 100kΩ || ‹ 4pF

Coupling DC

Max. input voltage 40V (DC + peak AC)

Triggering

Analog channels:
Automatic: Linking of peakdetection and triggerlevel

Min. signal height 0.5 div.

Frequency range 5Hz…400MHz

Level control range From peak- to peak+
Normal (without peak):

Min. signal height 0.5 div.

Frequency range 0…400MHz

Level control range –10div....+10div.

Operating modes: Flanke /Video/Logik /Pulse
Slope: Rising, falling, both
Sources: CH1, CH2, Line, Ext.

[CH1...CH4, Line, Ext.]

Coupling: AC: 5Hz...400MHz

DC: 0...400MHz
HF: 30kHz...400MHz
LF: 0...5kHz
Noise rejection: 100MHz LPF switchable

Video: Pos. / neg. sync. impulse

Standards 525 Line /60Hz systems

625 Line/50Hz systems

Fields Field 1, field 2, both

Line All, selectable line number

Source CH1, CH2, Ext. [CH1...CH4]
Logic: AND, OR, TRUE, FALSE

Source LCH0…15

State LCH0…15 X, H, L
Indicator for trigger action: LED
Ext. Trigger via: Auxiliary input [Aux. input at rear side]
Pre/Post Trigger: -100%...+200% related to 2MPts
2nd Trigger:

Slope Rising or falling

Min. signal height 0.5 div.

Accessories supplied: Line cord, Operating manual, 2 [4] Probes, 10:1 with
attenuation ID (HZ350), Dual-Interface USB/RS-232 (HO720), CD

Optional accessories:

HO730 Dual-Interface Ethernet/USB
HO740 Interface IEEE-488 (GPIB) galvanically isolated
HZ46 4RU 19'' Rackmount Kit
HO3508 8 Channel Logic Probe

Frequency range 0…400MHz

Level control range –10div....+10div.

Operating modes:
after time 20ns…0.1s
after incidence 1…2

16

Horizontal System

Domain representation: Time, Frequency (FFT), Voltage (XY)
Representation Time Base: Main-window, main- and zoom-window
Memory Zoom: Up to 100.000:1
Accuracy: 20ppm
Time Base:

Refresh operating modes 20ms/ div.…1ns/ div.
Roll operating modes 50s /div.…50ms/ div.

Digital Storage

Sampling rate (real time): 2x2GSa/s, 1x4GSa/s

[4 x 2GSa/ s, 2 x4GSa/s]
Logic channels: 16 x 1GSa/s

Sampling rate (random): 50GSa/ s (n /a to logic channels)
Memory: 2 x2MPts [4 x 2MPts]
Operation modes: Refresh, Average, Envelope, Peak-Detect

Roll: free run/ triggered

Resolution (vertical) 8Bit
Resolution (horizontal)

Yt Mode (50 Pts./div.)

XY Mode 8 Bit
Interpolation: Sinx/x (CH1...CH4), Pulse (LCH0...15)
Persistence: Off, 50ms...∞
Delay pretrigger: 0...2 Million x (1/samplerate)

posttrigger: 0...4 Million x (1/samplerate)
Display refresh rate: Up to 2500 waveforms/ s
Display: Dots (acquired points only), vectors (inter-

polation), ‘persistence’

Reference memories: 10

Operation / Measuring / Interfaces

Operation: Menu-driven (multilingual), Autoset,

help functions (multilingual)

Save / Recall memories: 10 complete instrument parameter settings
Frequency counter:

0.5Hz...1MHz 5 Digit resolution

› 1MHz…350MHz 6 Digit resolution

Accuracy 20ppm
Auto measurements: Frequency, Period, UDC, Upp, Up+, Up-,

U

RMS

, U

Avg

, t

Rise

, t

Fall

Cursor measurements: ΔV, Δt, 1/Δt (f), V to Gnd, Vtrelated to Trigger

point, ratio X and Y, pulse count, peak to
peak, peak+, peak-

Interface: Dual-Schnittstelle USB/RS-232 (HO720)

USB-Stick (frontside)
USB-Printer (rear side) with SW V2.0
DVI for ext. monitor

Optional: IEEE-488, Ethernet/USB

Mathematic functions

Number of formula sets: 10 formula sets with up to 5 formulas each
Sources: All channels, references

and math. memories

Targets: Math. memories
Functions: ADD, SUB, 1/X, ABS, MUL, DIV, SQ,

POS, NEG, INV

Display: Up to 4 math. memories

General Information

Probe ADJ Output: 1kHz/1MHz square wave signal ~0.2V

pp

(ta ‹ 4ns)

Line voltage: 105...253V, 50 / 60Hz, CAT II
Power consumption: Max. 70Watt at 230V, 50Hz
Protective system: Safety class I (EN61010-1)
Operating temperature: +5°C...+40°C
Storage temperature: -20°C...+70°C
Max. rel. humidity: 5%...80% (non condensing)
Dimensions (W x H x D): 285x175x220mm
Weight: 3.6kg