Hamee SH09 User Manual

SH09 Stereo Bluetooth Headset User Manul

Operating Instructions

Power On

When the headset is off, press and hold the Multi-Function Button (MFB) for 2 seconds.
The LED indicator will flash slowly in blue. You will hear the word “Hello” from the speaker
of the headset. The headset will be paired with the last connected bluetooth device or
mobile phone automatically when turned on.

Power Off

When the headset is on, press and hold the MFB for 4 seconds. The LED indicator will
flash slowly in red. You will hear the word “Goodbye” from the speaker of the headset. The
headset will disconnect from your phone devices when turned off.

Pairing Mode

When the headset is off, press and hold the MFB for 5 seconds until the LED indicator
flashes red and blue in alternating colors. You will hear the word “Pairing” from the
speaker of the headset.

Note: If you release the MFB before the headset goes into pairing mode, it will power on
and connect with the last paired device. If you want to pair the headset with a new phone
device, please power off the headset and enter into pairing mode.

Easy Connect Function

If the headset doesn’t connect with any phone when it’s on, you will need to enter the
headset into pairing mode by pressing volume- and volume+ concurrently.

Answering Calls

If a call comes in when listening to music or headset is standing by, press the MFB to
answer the incoming call. You will hear the words “Call Answered” from the speaker of the
headset. If the music is playing, it will pause automatically during the call. After finishing
your call, the music will start playing automatically.

Reject Calls

If a call comes in when listening to music or headset is standing by, press and hold the
MFB for 2 seconds to reject the incoming call. You will hear the words “Call Rejected” from
the speaker.

End Calls

Press the MFB to terminate when you finished your call, you will hear the words “Call
Terminated”.

Volume

To adjust the volume when talking on the phone, press the volume+ or volume- to make
volume go up or down. When you reach the max/min volume, you will hear a warning
tone.

Last Number Redial

When listening to music or headset is standing by, double click the MFB to redial the last
number. You will hear the words “Last Number Redial” from the speaker of the headset. If
you are listening to music, it will pause automatically during the call.

Mute

When talking on the phone, press and hold volume+ or volume- for 2 seconds to mute
your microphone. You will hear the caller, but the caller will not to hear you.

Note: There will be a warning tone every 3 seconds, reminding you that you are in mute
mode.

Quit Mute

Hold volume+ or volume- for 2 seconds to exit mute mode.

Switching Between Your Mobile Phone and Headset

When talking on the phone, double-click the MFB to switch the voice from your headset to
your mobile phone. By double clicking the MFB again, the voice will switch back to the
headset. You will hear the words “Transfer Audio” from the speaker of the headset.

Reconnect

When the headset is disconnected from your mobile phone, you will hear the words “Your
Device is Disconnected”. If you press the MFB, it will reconnect. You will hear the words
“Your Device is Connected” from the speaker of the headset.