Hamee SH03B Users Manual

SH03B Stereo Bluetooth Headset Specification

FCC ID:2AD2XSH03B

Basic Specifications

■Size: 31×28×9mm

■Weight: 17.2g（Net Weight）

■Charging port: Micro USB

■Keys: 5 (MFB button, volume+ button, volume- button, backward button, forward

button)

■Battery: Rechargeable lithium polymer battery 3.7V; 120mAh

■Charger output: 5V/0.5~1.0A

■Charge indicator: Red LED light (Charging) / Blue LED light (Charging completed)

■Standby time: about 200 hours

■Talk time: about 8 hours

■Music time: about 6 hours

■Charging time: about 2 hours

■Indicator for charge in working stage: Battery voltage lower than 3.3V（the stage of

battery lower than 15%)，there will be a warning tone; battery voltage lower than 3.1V

( the stage of battery lower than 5%), the headset will power off directly.

Speaker and MIC parameters

peaker specifications / mode: Φ9mm

■S

■Impedance: 32Ω/ typ

■Frequency(Hz): 20Hz～20KHz

■MIC Style: c

■MIC

sensitivity:

apacitive

-42±3dB

Bluetooth Parameters

■ Bluetooth version: 4.1

■ Support Profile: HSP, HFP, A2DP, AVRCP

■ The remote control to speaker: MFB (Power ON / Power Off / Play / Pause); Vol+, Vol-,

Previous song, Next song.

■ Device Name: SH03B

■ Pass: 0000

■ RF transmitter: class II (-6dBm ~ +4 dBm)

■ Receive sensitivity:-90dBm

■ Transmission Range (Hz): 2.402GHz ~ 2.480GHz

■ Transmission distance: 10m

Certifications (TBD)

Mechanical Reliability

■ Button: 10 thousand times

■ Charging Port（Micro USB）: plug 5000 times

■ LED: luminance/light-leaking luminosity must remain the same

Operating Instructions

Power On

When the headset is off, press and hold the multi-function Button (MFB) for 2 seconds. The

LED indicator will flash for one second in blue. At this time you will hear the words “Power

ON” from the headset. The headset will be paired with the last connected Bluetooth device

or mobile phone automatically when turned on.

Power Off

When the headset is on, press and hold the MFB for 3 seconds. The LED indicator will flash

once slowly in red. At this time, you will hear the words “Power Off” from the headset. The

headset will disconnect from your phone devices when turned off.

Pairing Mode

When the headset is off, press and hold MFB for 5 seconds until the LED indicator f

lashes red and blue in alternating colors. At this time, you will hear the words “Pairin

g” from the headset.

※ If you release the MFB before the headset goes into pairing mode, it will power on and

connect with the last paired device. If you want to pair the headset with a new phone device,

please power off the headset. or press the vol+ and vol- button concurrently to go into

pairing mode again.

Easy connection function

If the headset doesn’t connect with any phones when it is on, you can enter into speed

pairing mode by pressing the vol+ and vol- button concurrently and connect with your

phone.

Answering calls

If a call comes in when listening to music or headset is standing by, press the MFB to

answer the incoming call. You will hear the words “Call Answered” form the speaker of the

headset. If the music is playing, it will pause automatically during the call, the music will start

playing automatically.

Reject Calls

If a call comes in, press and hold the MFB button for 2 seconds to reject the incoming call.

You will hear the words “Call Rejected” from the speaker of the headset.

End Calls

Press the MFB to terminate when you finished your call, you will hear the words “Call

Terminates”.

Volume

To adjust the volume when talking on the phone, press the vol+ and vol- to make volume do

up and down. When you reach the max/min volume, you will hear a warning tone.

Last Number Redial

When listening to music or headset is standing by, double click MFB to redial the last

number. You will hear the words “Last Number Redial” from the speaker of the headset. If

you are listening to music, it will pause automatically during the call.

Mute

When talking on the phone, press and hold vol+ or vol- for 2 seconds to mute your phone.

You will hear the caller, but the caller will not hear you. There will be a warning tone every 10

seconds, reminding you that you are in mute mode.

Quit Mute

Press and hold vol+ or vol- for 2 seconds to exit mute mode.