HAMAMATSU PMA-11 Datasheet
Photonic Multichannel Spectral
Analyzer Model: PMA-11
The PMA-11 is a spectral analyzer that integrates a
spectrograph and high performance multi-channel
photodetector in a single compact chassis. Light
collection is simplified through the use of optical fiber.
The diffraction grating of the spectrograph and multichannel photodetector are rigidly fixed, resulting in
excellent wavelength reproducibility. The wavelength
axis and spectral response characteristics are calibrated at the factory, so that spectral measurements
can be carried out easily and accurately.
The PMA-11 series offers four different multi-channel
photo-detectors to choose from, for additional flexibility
in grating selection, allowing the user to optimize the
performance for the application at hand.
Equipped with a standard SCSI interface, the PMA-11
is easily connected to any type of computer for data
collection and analysis.
●
Compact Integration of
a Spectrograph and Multi-
channel Photodetector
●
High Sensitivity
●
Easy Measurement Using
Optical Fiber Input
Light source
PMA-11 Standard Configuration
Main unit
HAMAMATSU
POWER
C7473
SIGNAL INPUT
SCSI
Basic software
Personal computer
1
1
1
Microscope
attachment
Microscope
Fiber input optics
[Standard Configuration]
Main unit
Fiber input optics
Basic software
* SCSI cable not included
C5965
(MOS linear image sensor model)
C5966
(CCD image sensor model)
C7473
(BT- CCD image sensor model)
C8147
(InGaAs linear image sensor model)
A compact unit containing a multi-channel photo-detector,and
power supply all in one.
Optical fiber input makes spectral measurements easier than ever.
FEATURES
● Measurements of the spectrum are easier and more
accurate than ever before
The spectrum can now be easily measured by light collection through an
optical fiber. The wavelength axis and spectral response characteristics are
calibrated at the factory, so that spectral measurements can be carried out
easily and accurately.
● Superb cost perfomance model : C5965
The C5965 uses a MOS linear image sensor realises high performance and
low cost.
● High sensitivity model : C5966
The C5699 uses the CCD leaner image sensor has sensitivity a hundred
times better than the C5965 model.
● Ultra-high sensitivity model : C7473-36
The C7473-36 consists the thermoelectric-cooling type BT-CCD image
sensors, which have a high quantum efficiency and a compact CzernyTurner type spectrograph. The simultaneous measurement of the wavelength
from an ultraviolet to a near-infrared region with high wavelength resolution
and high sensitivity is realised.
APPLICATIONS
● UV to visible spectroscopy
● Fluorescence spectroscopy
● Raman scattering
● Chemiluminescence analysis
● Liquid chromatography
● Gas chromatography
● ICP emission analysis
● Discharge emission analysis
● Combustion analysis
● Micro spectroscopy
● Near infrared model : C8147-34, C8147-38
The C8147 realises a simultaneous and high-resolution measurement of
absorption or reflection spectra in a near infrared wavelength region with
a wide dynamic range and a low noise.
● High efficiency optics
Adoption of a ø1mm bundle fiber and a bright spectrograph detects a
measured light efficiently.
● Compact design
High performance is built in a small case. This completely new design
ensures that the PMA-11 will fit anywhere.
● External synchronisation can be used
Measurements can now be carried out synchronised to external trigger
signals, allowing measurement of pulse phenomena.
● Standard SCSI interface allows connection to computer
[ Industrial applications ][ Scientific applications ]
● Water quality testing
● Evaluation of light sources
●
Chromaticity
measurements
● Impurities testing
●
Thin film thickness monitors
● UV-ray monitors
● Plasma monitors
● Fruit tester
● Plastic sorting
● Color filter testing
Loading...