HAMAMATSU C9052-03, C9052-02, C9052-01, C9052-04 Datasheet

MODULE

Si photodiode evaluation circuit

C9052 series

Easy-to-use circuit for Si photodiode operation

Features Applications

l

Allows easy evaluation of standard Si photodiodes

l

On-board circuit examples for typical applications of
Si photodiodes

l

Multiple circuits assembled on one board

l

Support board (C9052-04 with dedicated cable
A9053) for processing output signals from head board
(C9052-01/-02/-03 with dedicated cable A9053-01)

Absolute maximum rating

■

Parameter Symbol C9052-01 C9052-02 C9052-03 C9052-04 Unit

Maximum supply voltage Vcc Max. ±15 +15 +12 V
Operating temperature Topr +10 to +40
Storage temperature Tstg 0 to +50 °C



C9052-01

Low noise AC amplifier circuit, photocurrent-to-voltage conversion circuit and wide band amplifier circuit on one board

Circuit configuration Features

Low noise AC amplifier circuit Low noise AC amplifier circuit using FET, bandwidth 160 to 1 MHz, trans-impedance 15 kV/A

Photocurrent-to-voltage
conversion circuit
Wide band amplifier circuit Amplifier circuit with bandwidth of DC to 1 MHz and trans-impedance of 30 kV/A

<Usable photodiodes>

Standard Si PIN photodiodes with metal package (TO-18, TO-5, TO-8): S5821 series, etc.

Current-to-voltage conversion circuit with bandwidth of DC to 100 kHz and feedback resistance
of 100 kW

l

Testing and evaluation of standard Si photodiodes

l

Simple optical power meters

°C

C9052-02

Light balance detection circuit, light-to-logarithmic voltage conversion circuit and light integration circuit on one board

Circuit configuration Features

Light balance detection circuit

Light-to-logarithmic voltage
conversion circuit

Light integration circuit

<Usable photodiodes>
Standard Si photodiodes with metal package (TO-18, TO-5, TO-8): S2386 series, etc.
Standard Si photodiodes with ceramic package (except -16BQ/-16BK/-16BR types): S1337-1010BR, S1227-1010BR, etc.

Detects output balance between two photodiodes when light enters them and outputs the light
level difference as a voltage.

Outputs a voltage in proportion to logarithmic change in detected light level

Converts input pulsed light of constant cycle into DC signal. Controlled by external integration
reset pulses.

C9052-03

Two types of light-to-frequency conversion circuits assembled on one board

Circuit configuration Features

High illuminance type Interface circuit that outputs pulses at frequency proportional to input light from 100 to 10,000 lx.
Low illuminance type Interface circuit that outputs pulses at frequency proportional to input light from 1 to 200 lx.
<Usable photodiodes>
S1087 (high illuminance type), S2386-5K (low illuminance type)

PRELIMINARY DATA

Aug. 2002

1

Si photodiode evaluation circuit

C9052 series

C9052-04

Power supply circuit for driving C9052-01/-02/-03 and output processing circuit assembled together.

Circuit configuration Feature Connectable product

Power supply circuit

Sample-and-hold circuit *

Supplies constant voltage to each head board.
C9052-01/-02: ±12 V, C9052-03: +12 V
Samples and holds the output signal of head board in synchronization with
input light.

C9052-01/-02/-03

C9052-01/-02

Peak hold circuit * Holds peak values of head board output signal. C9052-01/-02

Integration reset circuit

Imbalance indication circuit

Frequency counter circuit

Reset pulse generator circuit for integration circuit output.
Operates in synchronization with input light and sample-and-hold circuit.
Monitor circuit for light balance detection circuit. Indicator LED lights up
when difference between two photodiodes exceeds a specified level.
Counts the number of output pulses from a frequency conversion circuit
and turns on the indicator LED in a lighting cycle according to light level.

C9052-02

C9052-02

C9052-03

* The sample-and-hold circuit and peak hold circuit can be selected to replace the jumpsocket.

■ Circuit connection

C9052-01

or

C9052-02

or

C9052-03

A9053

NOTE) Photodiode is sold separately.

■ Dimensional outlines (unit: mm)

(4 ×) 3.2PHOTODIODE *

COMPONENT

MOUNTED SIDE

a

* Photodiode and connector for A9053
are sold separately.

a

50

43

CONNECTOR

FOR A9053

-01

-02

(20)

(12)

*

-03Mark

C9052-04

· OSCILLOSCOPE

· VOLTMETER

· A/D CONVERTER
, etc.

KACCC0183EA

C9052-04C9052-01/-02/-03

85

(4 ×) 3.2

63

70

CONNECTOR

FOR A9053

(20)

75

COMPONENT

MOUNTED SIDE

95

105

KACCA0119EA KACCA0120EA

■

Accessory

Dedicated AC adapter (C9052-04 only)

Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.

HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Hamamatsu City, 435-8558 Japan, Telephone: [phone], Fax: [phone], http://www.hamamatsu.com

U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: [phone], Fax: [phone]
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: [phone], Fax: [phone]
France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: [phone], Fax: [phone]
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: [phone], Fax: [phone]
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: [phone], Fax: [phone]
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: [phone], Fax: [phone]

Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2002 Hamamatsu Photonics K.K.

2

Cat. No. KACC1083E03
Nov. 2002 DN