Digital CCD Camera
DATA SHEET
▲ Intensified head: C4880-91, -92
This camer
coupled through a fiber optics to Hamamatsu’s CCD S5466. This
provides ultra-high sensitivity.
Under a low light level region that requires a long time exposure
time, this camera can acquire equivalent S/N images within a
shorter period of time. Furthermore, the ultra high speed gating
function (shortest gate time: 5 ns) and gate repetition function
(maximum rate: 10 kHz) have been implemented. Acquisition of
images in synchronization with repetitive phenomenon enables
image accumulation by the CCD. This provides images with a
higher S/N ratio compared to accumulation using memory.
a system has an image intensifier ( 18 mm dia.)
❚ APPLICATIONS
C4880-91,-92
(Manufactured to order)
❚
SPECTRAL RESPONSE CHARACTERISTICS
20
10
Quantum efficiency (%)
0
200 400 600
❚ FEATURES
••
Ultra fast gate time 5 ns
•
••
••
Ultra high sensitivity
•
••
••
Wide dynamic range
•
••
••
On-chip integration
•
••
••
Computer-controlled
•
••
Wavelength (nm)
800
* This is typical, not guaranteed.
••
•
Analysis of engine combustion
••
••
•
Analysis of flames
••
••
•
Ozone layer measurements
••
••
•
All-sky camera
••
••
•
Repetitive phenomenon in extremely faint light regions
••
❚ SYSTEM CONFIGURATION
CCD
S5446
Camera head
Intensified air-cooled head
(Manufactured to order)
Vacuum pump
Camera controller
Image acquisition unit (kit)
Image input board Software
Computer
Commercially available
software
❚ SPECIFICATIONS
Model name C4880-91 Manufactured to order C4880-92 Manufactured to order
Camera head type Intensified air-cooled headr
Circulating water cooler (sold separately)
Vacuum pump (sold separately) Required
Image intensifier type
Photocathode
Photocathode size 18mm
MCP
Gate time 100 ns to DC
Gate repetition rate
Imaging device
Effective no. of pixels 512 (H) ×
Cell size 24 (H) × 24 (V) µ
Effective area 12.29 (H) × 12.29 (V) mm
Frame rate
Cooling method
Cooling temperature -30 °C
CCD cooling control
A/D converter
Lens mount
Variable analog gain
Variable offset
Amp gain
Gate time control
MCP gain control
Trigger mode
Binning scan
Sub-array scan 1/1, 1/2, 1/4, 1/8 (H) ×
Super-pixel scan 2 × 2, 4 × 4, 8 ×
External trigger input
Output signal (digital output)
External control
Ambient storage temperature -10 to +50 °
Ambient operating temperature 0 °C to +40 °
Ambient operating/storage humidity
Line voltage 100 / 117 / 220 / 240 VAC, 50/60 Hz
Power consumption
High-precision scan mode
Fast scan mode
Front panel dial / software-controlled switching; Temperature displayed on front panel LCD
INTERNAL TRIGGER MODE, EXTERNAL TRIGGER MODE, EXTERNAL TIME MODE
Cooling ON/OFF control, cooling temperature setting function
Front panel dial / software-controlled switching, 1 - 6 times (high-speed scan)
Front panel dial / software-controlled switching (fast scan)
Proximity type image intensifier
S5466 Model 1 full-frame transfer CCD
0.5 frames/sec (156 kHz/pixel)
7 frames/sec (2.5 MHz/pixel)
Peltier cooling / forced-air cooling
2 steps (fast scan), 3 steps (precision scan)
Parallel digital output (conforms to RS-422)
70% max. (with no condensation)
–
S-20
1 stage
Max. 10 kHz
512 (V)
12 bits
C-mount
Yes
Yes
Yes
any desired number (V)
Yes
RS-232C
C
C
Approx. 220 VA
5 ns to DC
m
8
❚ DIMENSIONAL OUTLINES (Unit: mm)
••
•
Intensified head (approx. 4 kg)
••
120±0.5 302±1.0
158±0.5
56±0.3
C-mount
40±0.2
★ Product and software package names noted in this documentation are trademarks or registered trademarks of their respective manufacturers.
●
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
●
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications and external appearance are subject to change without notice..
2-M6 D=6
104±0.5
30±0.2
30±0.2
1/4-20UNC D=6
4-M4 D=6
© 2002 Hamamatsu Photonics K.K.
••
•
Camera controller (approx. 14 kg)
••
149±0.5
430±1
458±1
Certificate: 09 105 79045
ISO 9001
HAMAMATSU PHOTONICS K.K., Systems Division
Homepage Address http://www.hamamatsu.com
812 Joko-cho, Hamamatsu City, 431-3196, Japan, Telephone: (81)53-431-0124, Fax: (81)53-435-1574, E-mail:export@sys.hpk.co.jp
U.S.A. and Canada:
Germany:
France:
United Kingdom:
North Europe:
Italy:
Hamamatsu Photonics Italia S.R.L.: Strada della Mois, 1/E 20020 Arese (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741, E-mail: info@hamamatsu.it
Hamamatsu Photonic Systems: 360 Foothill Road, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1)908-231-1116, Fax: (1)908-231-0852, E-mail: usa@hamamatsu.com
Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658, E-mail: info@hamamatsu.de,
Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10, E-mail: infos@hamamatsu.fr
Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW U.K., Telephone: (44) 1707-294888, Fax: (44)1701-325777, E-mail: info@hamamatsu.co.uk
Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 Solna, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01, E-mail: info@hamamatsu.se -
Cat. No. SICS1101E01
MAR/2002 HPK
Created in Japan (PDF)