HAMA HAMA 00186437 Instructions [de]

00186437

AIR PURIFIER „SMART“

LUFTREINIGER

M

G Operating Instructions D Bedienungsanleitung

G Operating Instructions

Thank you for choosing aHama product.
Take your time and read the following instructions and information completely.Please keep these instructions in
asafe place for futurereference. If you sell the device, please pass these operating instructions on to the new
owner.

1. Explanation of warning symbols and notes

Risk of electric shock

This symbol indicates arisk of electric shock from touching product parts carrying hazardous voltage.

Warning

This symbol is used to indicate safety instructions or to draw your attention to specichazards and risks.

Note

This symbol is used to indicate additional information or important notes.

2. Safety instructions

• The product is intended for private, non-commercial use only.

• Use the product only for the intended purpose.

• Protect the product from dirt, moistureand overheating and use it in dry rooms only.

• Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.

• The product is intended only for use inside buildings.

• Only use the article under moderate climatic conditions.

• As with all electrical products, this device should be kept out of the reach of children.

• Do not operate the product outside the power limits specied in the technical data.

• Do not use the product in areas in which electronic products arenot permitted.

• Do not use the product in adamp environment and avoid splashing water.

• Do not drop the product and do not expose it to any major shocks.

• Do not modify the product in any way.Doing so voids the warranty.

• Keep the packaging material out of the reach of children due to the risk of suffocation.

• Dispose of packaging material immediately in accordance with the locally applicable regulations.

• Route all cables so that thereisnorisk of tripping.

• Do not bend or crush the cable.

• Always pull directly on the plug when disconnecting the cable, never on the cable itself.

• This device is not intended for use by persons (including children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the device by aperson responsible for their safety.

Risk of electric shock

• Do not open the device or continue to operate it if it becomes damaged.

• Do not use the product if the

AC adapter,the adapter cable or the mains cable aredamaged.

• Do not attempt to service or repair the product yourself.Leave any and all service work to qualied experts.

3. Package contents

1xair purier
1xcombi lter
1xoperating instructions

4. Connection to the mains

Warning

• Only operate the product from an approved socket that is connected to the public power supply.The socket
must be installed close to the product and must be easily accessible.

• Disconnect the product from the power supply using the On/Off switch –ifthis is not available, unplug the
power cordfromthe socket.

• If using amulti-socket power strip, make surethat the total power consumption of all connected devices
does not exceed the power strip‘s maximum throughput rating.

• If you will not be using the product for aprolonged period, disconnect it from mains power.

• Place the air purier on astable, at surface. Connect the air purier to aproperly installed socket.

5. Installing the app

• Download the „Hama Smart Home (Solution)“ app using the QR code and install it.

00186437

AIRPURIFIER

LUFTREINIGER

M

https://de.hama.com/

smarthome#smart-solution

6. Integrating devices into the Hama Smart Home (Solution) app

• Make sureyour mobile phone is connected to a2.4 GHz WiFi network. To connect the air purier to the app,
rst connect it to aproperly installed socket. If the air purier is now in standby status, the WiFi symbol should
ash quickly on the display.Ifthe symbol does not appear or ashes slowly,press and hold the button for
5seconds. Now the WiFi symbol ashes quickly.

5s

M

• Open the app and select „My home“ at the bottom left-hand edge of the screen.

• Then tap the „+“ at the top right-hand edge of the screen and select the category „Air purier“.

• Now select your WiFi network and enter your password.

• Check the box in the „Next step“ and click NEXT.

• If the connection is successful, the app conrms that the air purier has been incorporated. Youcan

now assign the air purier adifferent name if you wish.

• Click on „Done“ to complete the process.

1

2

3

If the previously described method for integrating the air purier does not work, thereisthe
option of connecting the device via access point (AP) mode.

•In the rst step, the WiFi indicator on the air purier display must ash slowly.Ifthis is not the case,
repeatedly for about 5seconds until it ashes slowly.

•Now proceed in the same way as described before. Beforeyou tick „Next step“, select AP mode in the
top right-hand corner.

•The following screen appears:

•Now tick the next step, click Next and select „Connect now“ in the next screen. In the WLAN network

overview,select the network with the name „SmartLife_XXXX“.

•Youcan ignoreany error message that you arecurrently not connected to the Internet and then return
to the Hama Smart Home (Solution). Your air purier is now connected.

1

2

• After asuccessful connection, you will see that the WiFi symbol on the display stops ashing.
It may disappear for asecond and then light up green permanently.

M